Votes - 4, Average rating: 3.8
(
)
)
|
Other manuals for this model:
manual abstract
Advanced Camera User Guide Direct Print User Guide Basic Camera User Guide (This Guide) Software Starter Guide ZoomBrowser EX/ ImageBrowser Software User Guide • PDF manuals available on the Canon website. Imaging/informatione. html In this guide, the Basic Camera User Guide is called the Basic Guide, and the Advanced Camera User Guide is called the Advanced Guide. Also, "battery" refers to the battery pack. Preparations 1. Charging the Battery. Charge the battery before use under the following circumstances. • When using the battery for the first time. • When the "Change the battery pack" message displays. 1. Insert the battery into the battery charger. 2. Plug the battery charger (CB-2LV) into a power outlet, or attach the power cord to the battery charger (CB-2LVE) and plug it into a power outlet. • Battery charger model names and types vary by region. The charge indicator will light orange while the battery is charging. It will change to green when the charge is complete. Charging takes approximately 90 minutes. Charge Indicator Align these symbols For CB-2LV For CB-2LVE To protect the battery and prolong its life, do not charge it for longer than 24 hours continuously. • See the Advanced Guide: Battery Handling (p. 105) Preparations 2. Installing the Battery. 1. Slide the memory card slot/battery cover and open it ( , ). 2. Push the battery lock in the direction of the arrow ( ) and insert the battery until it locks. To remove the battery, push the battery lock in the direction of the arrow ( ) and hold it while pulling the battery out. Battery Lock 3. Inserting the Memory Card. 1. Insert the memory card until it clicks into place. 2. Close the memory card slot/battery cover ( , ). Front Ensure that the memory card is correctly oriented before inserting it in the camera. It may damage the camera if inserted incorrectly. • See the Advanced Guide: Handling the Memory Card (p. 107) • See the Advanced Guide: Formatting Memory Cards (p. 23) • To Remove the Memory Card Push the memory card with your finger or the toggle on the wrist strap until the memory card clicks and then release it. Preparations You can use SD* memory cards and MultiMediaCards with this camera. These cards are collectively called memory cards in this guide. *SD stands for Secure Digital, a copyright protection system. First Time Settings • Setting the Date/Time 1. Press the power button ( ). 2. Use the or button to select an item and the or button to change its value ( ). To set the daylight saving option, use the or button to display . 3. Confirm that the correct time is displayed and press the FUNC./SET button ( ). The date and time can also be set in the Set up menu (p. 13). • A rechargeable lithium battery is built into the camera to save such settings as the date/time. This battery charges when the main battery is in the camera. When you purchase the camera, place the main battery in it for approximately four hours or use AC Adapter Kit ACK-DC10 (sold separately) to charge the lithium battery. It will charge even if the camera is turned off. • The date/time settings may be lost after approximately three weeks if you remove the main battery. Reset the date/time settings if this occurs. • See the Advanced Guide: Setting the World Clock (p. 24). • Setting the Display Language 1. Slide the mode switch to (playback). 2. Hold down the FUNC./SET button and press the MENU button. 3. Use the , , or button to select a language and press the FUNC./SET button. The display language can also be set in the Set up menu (p. 13). Indicators Shooting 1. Press the power button. Power button The start-up sound will play and the start-up image will display in the LCD monitor. • Pressing the power button again turns the power off. • To switch to the setting that mutes all sounds (except for the warning sound), press and hold the DISP. button while pressing the power button. • See the Advanced Guide: Using the LCD Monitor (p. 15) • See the Advanced Guide: Power Saving Function (p. 22) • See the Advanced Guide: Set up Menu (p. 29) • See the Advanced Guide: My Camera Menu (p. 31) 2. Set the shooting mode to (auto). 1. Slide the mode switch to (Rec.) ( ). 2. Press the FUNC./SET button ( ) and use the or button ( ) to select (auto). 3. Press the FUNC./SET button ( ). 3. Aim the camera at the subject. 4. Focus and shoot. 1. Press the shutter button halfway to focus. When the camera focuses, the camera beeps twice and the indicator lights green. Shooting 2. Press the shutter button fully to shoot. The shutter sound will play and the image will record. The indicator will blink green while the image is recorded to the memory card. ..See Basic Shooting Functions (p. 6). • See the Advanced Guide: Indicators (p. 22). .. See the Advanced Guide for the various shooting methods available. Reviewing an Image Right After Shooting After a shot is taken, the image appears in the LCD monitor for approximately 2 seconds. You can continue to display image...