|
User manual Canon, model EOS 5D
Manafacture: Canon
File size: 4.72 mb
File name:
Language of manual:
|
 
|
|
|
Free link for this manual available at the bottom of the page
Other manuals for this model:
manual abstract
Bordered The shooting data will be imprinted on the border on 9x13cm and larger prints. **-up Option to print 2, 4, 8, 9, 16, or 20 copies of same image on one sheet. 20-up 35-up On A4 / Letter size paper, 20 or 35 thumbnails of the images ordered through DPOF will be printed. [20-up ] will have the shooting information* printed on the side of the thumbnail images. Default With a Canon printer, the print will be borderless. * From the Exif data, the camera name, lens name, shooting mode, shutter speed, aperture, exposure compensation amount, ISO speed, etc., will be imprinted. Date/File number imprinting 4 Set the other options. EPrinting effects RNumber of copies ..If necessary, you can also set the < > date/file number imprinting, printing effects, and number of copies. ..Turn the <5> dial to select the menu item, then press <0>. ..Turn the <5> dial to select the desired setting, then press <0>. ..Depending on the BJ printer, the Printing effects setting may enable you to select the [Vivid] (for vivid greens and blue sky), [NR] (noise reduction), [Vivid+NR], [Face] (compensate for a dark face caused by backlighting) or [On] setting. ..For details on trimming, see page 136. wPrinting with PictBridge 5 Start printing. ..Turn the <5> dial to select [Print], then press <0>. • The printing will start. ..When the printing ends, the screen will return to step 1. ..To stop the printing, press <0> while [Stop] is displayed, then turn the <5> dial to select [OK] and press <0>. ..Depending on the image’s file size and recording quality, it may take some time for the printing to start after you select [Print]. ..The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer. See the printer’s instruction manual to find out what the [Default] settings are. Handling Printer Errors If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to resume printing but it does not resume, operate the buttons on the printer to resume printing. For details, see the printer’s instruction manual. Error Messages If a problem occurs during printing, an error message will appear on the camera’s LCD monitor. Press <0> to stop printing. After resolving the problem, resume printing. For details on how to resolve a printing problem, refer to the printer’s instruction manual. Paper Error Check whether the paper is properly loaded in the printer. Ink Error The printer has run out of ink or the waste ink tank is full. Hardware Error Check for any printer problems other than paper and ink problems. File Error The selected image cannot be printed via PictBridge. Images taken with a different camera or images edited with a computer might not be printable. 129 APrinting with CP Direct Printer connected icon 1 Select the image to be printed. ..Check that the icon is displayed on the upper left of the LCD monitor. ..Turn the <5> dial to select the image to be printed. 2 Press <0>. • The print setting screen will appear. Print setting screen The printing style settings are displayed. is the date icon. Sets the quantity to be printed. Sets the trimming area. Sets the printing style. Returns to step 1. Starts the printing. 3 Select [Style]. ..Turn the <5> dial to select [Style], then press <0>. • The Style screen will appear. APrinting with CP Direct [Image] 4 Set the options as desired. ..Set the [Image], [Borders], and [Date] as desired. ..Turn the <5> dial to select the menu item, then press <0>. ..Turn the <5> dial to select the desired setting, then press <0>. [Borders] ..[Image] is selectable when card-size paper is used. If you select [Multiple], 8 small images of the same picture will be printed on the paper. ..Check the [Borders] and [Date] settings and set them if necessary. [Date] ..When you are done, press the button to return to the print setting screen. 5 Set the number of copies. ..Set as necessary. ..Turn the <5> dial to select [copies], then press <0>. ..Turn the <5> dial to set the number of copies, then press <0>. ..Set a number from 1 to 99. 131 APrinting with CP Direct 6 Set the trimming. ..Set as necessary. ..For details on trimming, see page 136. 7 Start printing. ..Turn the <5> dial to select [Print], then press <0>. • The printing will start. ..When the printing ends, the screen will return to step 1. ..To stop the printing, press <0> while [Stop] is displayed, then turn the <5> dial to select [OK] and press <0>. ..The date may look light if it is imprinted on a bright background or border. ..If [Multiple] is selected, [Borders] and [Date] cannot be selected. [Borderless] will be set and [Date] will be set to [Off]. The image will also be cut off along all four edges. ..If [Date] is [On], the date recorded for the image will appear on the print. The date will appear on the lower right of the image. ..If you select [Stop] while printing only one picture, the printing will not stop until it finishes printing the...
|
)