Votes - 4, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
When the menu is not displayed Press MENU longer to display the (Setup) screen. To cancel the (Setup) setting Select [Cancel] if it appears, then press z on the control button. If it does not appear, select the previous setting again. • This setting is maintained even when the power is turned off. 49 For details on the operation 1 page 49 Camera The default settings are marked with . Digital Zoom Selects the digital zoom mode. The camera enlarges the image using optical zoom (up to 3.). When the zoom scale exceeds 3., the camera uses either smart or precision digital zoom. Smart (Smart zoom) ( ) Enlarges the image digitally with almost no distortion. This is not available when the image size is set to [8M] (DSC-S780), [7M] (DSC-S750), or [3:2]. • The total zoom scale of Smart zoom is shown in the following table. Precision (Precision digital zoom) ( ) Enlarges all image sizes up to 6. total, but image quality deteriorates when zoom exceeds optical 3.. Off Does not use the digital zoom. Image size and total zoom scale using Smart zoom (Including optical zoom 3.) Size Total zoom scale DSC-S780 DSC-S750 5M Approx. 3.8. Approx. 3.6. 3M Approx. 4.8. Approx. 4.5. VGA Approx. 15. Approx. 14. 16:9 Approx. 5.1. Approx. 4.8. • When you press the zoom button, the zoom scaling indicator appears as follows. The W side of this line is the optical zoom area, and the T side is the digital zoom area Zoom scaling indicator • The total zoom scale of smart zoom/precision zoom includes the scale of the optical zoom. • The AF range finder frame does not appear when using the digital zoom. The or indicator flashes, and AF operates with priority on subjects located near the center of the frame. • When using the smart zoom, the image on the screen may look rough. However, this phenomenon has no effect on the recorded image. • You cannot use the Digital zoom when [Face Detection] is set to [On]. Camera For details on the operation 1 page 49 Function Guide When you operate the camera, the function guide appears. On Displays the function guide. Off Does not display the function guide. Red Eye Reduction The flash strobes two or more times before shooting to reduce the red-eye phenomenon when using the flash. On ( ) Reduces the red-eye phenomenon. Off Does not use Red Eye Reduction. • To avoid blurring of images, hold the camera firmly until the shutter is released. It usually takes a second after you press the shutter button. Also be sure not to allow the subject to move during this period. • Red-eye reduction may not produce the desired effects. It depends on individual differences and conditions, such as distance to the subject, or if the subject looked away from the pre-strobe. Auto Review Displays the recorded image on the screen for approximately two seconds immediately after shooting a still image. On Uses the Auto Review. Off Does not use Auto Review. • If you press the shutter button halfway down, the recorded image display disappears and you can immediately shoot the next image. Using the Setup screen For details on the operation 1 page 49 Internal Memory Tool This item does not appear when a “Memory Stick Duo” is inserted in the camera. Format Formats the internal memory. • Note that formatting permanently erases all data in the internal memory, including even protected images. 1 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be erased Ready?” appears. 2 Select [OK] with v, then press z. The format is complete. To cancel formatting Select [Cancel] in step 1 or 2, then press z. For details on the operation 1 page 49 Memory Stick Tool This item appears only when a “Memory Stick Duo” is inserted in the camera. Format Formats the “Memory Stick Duo”. A commercially available “Memory Stick Duo” is already formatted, and can be used immediately. • Note that formatting permanently erases all data on a “Memory Stick Duo”, including even protected images. 1 Select [OK] with v on the control button, then press z. The message “All data in Memory Stick will be erased Ready?” appears. 2 Select [OK] with v, then press z. The format is complete. To cancel formatting Select [Cancel] in step 1 or 2, then press z. Create REC. Folder Creates a folder in a “Memory Stick Duo” for recording images. 1 Select [OK] with v on the control button, then press z. The folder creation screen appears. 2 Select [OK] with v, then press z. A new folder is created with a number incremented one higher than the largest number, and the folder becomes the current recording folder. To cancel the folder creation Select [Cancel] in step 1 or 2, then press z. • When not creating a new folder, the “101MSDCF” folder is selected as the recording folder. • You can create folders designated up to “999MSDCF.” • Images are recorded in the newly created folder until you create another folder or select another recording folder. • You cannot delete a folder with the camera. To delete a folder, use your computer, etc. • Up to 4...
Other models in this manual:Cameras & Photo - DSC-S780 (3.47 mb)