Votes - 5, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
Auto Adjusts the White Balance automatically. • For details on the white balance, see page 8. • Under fluorescent lights that flicker, the white balance function may not work correctly even though you select [Fluorescent] ( ). • Except in [Flash] ( WB ) modes, [WB] is set to [Auto] when the flash strobes. • Some options are not available depending on the Scene mode (page 27). ISO: Selecting a luminous sensitivity Small number Large number Selects a luminous sensitivity with units of ISO. The larger the number, the higher the sensitivity. 1250 Select a large number when shooting in dark locations or shooting a subject moving at high speed, or select a small number to obtain high image quality. 800 400 200 80 Auto • For details on the ISO sensitivity, see page 7. • Note that the image tends to become noisier as the ISO sensitivity number increases. • [ISO] is set to [Auto] in the Scene mode. Using the menu Shooting menu For details on the operation 1 page 30 (P.Quality): Selecting the still image quality Selects the still image quality. Fine (FINE) Records with high quality (low compression). • When the mode dial is (Auto), the quality of a still image is [Fine]. Standard (STD) Records with standard quality (high compression). Shooting menu For details on the operation 1 page 30 Mode (REC Mode): Selecting the continuous shooting method Selects whether the camera performs continuous shooting or not when you press the shutter button. Burst ( ) Records three images in succession when you press the shutter button. • When “Recording” disappears, you can shoot the next image. • The flash is set to (Flash forced off). Normal Does not shoot continuously. On the [Burst] • The recording interval is approximately 2 seconds. • When the battery level is low, or when the internal memory or “Memory Stick Duo” does not sufficient space, you cannot shoot continuously. • You may not be able to shoot images in the Burst mode depending on the Scene mode (page 27). Using the menu Shooting menu For details on the operation 1 page 30 (Flash Level): Adjusting the amount of flash light Adjusts the amount of flash light. + ( +) Toward +: Makes the flash level higher. Normal – ( –) Toward –: Makes the flash level lower. • To change flash mode, see page 21. (Sharpness): Adjusting the sharpness of the image Toward + Toward – Adjusts the sharpness of the image. + ( ) Toward +: Sharpens the image. Normal – ( ) Toward –: Softens the image. (Setup): Changing Setup items See page 46. For details on the operation 1 page 30 Viewing menu The default settings are marked with . (Folder): Selecting the folder for viewing images Selects the folder containing the image you want to play back when using the camera with “Memory Stick Duo”. OK See the following procedure. Cancel Cancels the selection. 1 Select the desired folder with b/B on the control button. 2 Select [OK] with v, then press z. z On the folder The camera stores images in a specified folder of a “Memory Stick Duo”. You can change the folder or create a new one. • To create a new folder t [Create REC. Folder] (page 51) • To change the folder for recording images t [Change REC. Folder] (page 52) • When multiple folders are created in the “Memory Stick Duo” and the first or last image in the folder is displayed, the following indicators appear. : Moves to the previous folder. : Moves to the next folder. : Moves to either the previous or next folders. Using the menu Viewing menu For details on the operation 1 page 30 (Protect): Preventing accidental erasure Protects images against accidental erasure. Protect (-) See the following procedure. Exit Exits the Protection function. To protect images in single-image mode 1 Display the image you want to protect. 2 Press MENU to display the menu. 3 Select [-] (Protect) with b/B on the control button, then press z. The image is protected and the -(protect) indicator appears on the image. - 4 To protect other images, select the desired image with b/B, then press z. To protect images in index mode 1 Press (Index) to display the index screen. 2 Press MENU to display the menu. 3 Select [-] (Protect) with b/B on the control button, then press z. 4 Select [Select] with v/V, then press z. 5 Select the image you want to protect with v/V/b/B, then press z. A green - indicator appears on the selected image. - (green) 6 Repeat step 5 to protect other images. 7 Press MENU. 8 Select [OK] with B, then press z. The - indicator turns white. The selected images are protected. • To protect all images in the folder, select [All In This Folder] in step 4, and press z. Select [On] with B, then press z. Viewing menu For details on the operation 1 page 30 To cancel the protection In single-image mode Press z in step 3 or 4 of “To protect images in single-image mode.” In index mode 1 Select the image for which you want to remove protection in step 5 of “To protect images in index mode.” 2 Press z to turn the - indicator gray. 3 Repeat the operation above for all images to be...