Votes - , Average rating:
(
)
)
Manafacture: JVC
File size: 1.04 mb
File name: 40ec0603-fa42-4986-a837-e9e8f7158e8a.pdf
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
. If the disc is to be played on a different DVD player: Finalize the disc, press the OPEN/CLOSE button, and then remove the disc. For more details regarding finalizing, refer to page 43. . It is possible to insert a chapter mark either manually or automatically. Indexes are written together with chapter marks. The actual method to be used is determined by CHAPTER CREATION and SET INTERVAL from the RECORDER MENU (1/2) screen. . If chapter marks are to be inserted manually at any point, set CHAPTER CREATION to MANUAL. Chapter marks and indexes can then be inserted by pressing the REC button while recording. . If chapter marks are to be inserted automatically, first of all set CHAPTER CREATION to AUTO. Then use SET INTERVAL to set a time (in minutes) for chapter mark insertion. The DVD recorder will insert chapter marks and indexes at the corresponding intervals during recording. . Whether a chapter mark is automatically inserted or not during a recording pause is set with the AUTO CHAPTER (REC PAUSE) item. ON : Insert a chapter mark and index. OFF : Do not insert a chapter mark and index. Notes . The frame at which a chapter mark is inserted will be used for the corresponding thumbnail in the chapter menu. When EDIT MENU from the DVD MENU screen is set to ENABLE, the frames used for thumbnails can be modified on the THUMBNAIL EDIT screen that appears automatically at the end of recording. . Each title can contain up to 99 chapters. . In certain cases, the frames used for chapter menu thumbnails may differ slightly from the exact frames at which the corresponding chapter marks were inserted. . Indexes can be added or deleted when in the Playback mode. Using the Foot Switch to Perform Recording Operations such as recording and writing chapter marks (indexes) can be performed using the external switch that is connected to the foot switch terminal at the rear of this unit. . Use the FOOT SW1 terminal to turn ON/OFF recording. The FOOT SW1 item on the REMOTE menu screen can be used to specify whether to use the FOOT SW1 terminal as well as to specify conditions for using the terminal. ( . Page 70) . Use the FOOT SW2 terminal to write chapter marks (indexes). The FOOT SW2 item on the REMOTE menu screen can be used to specify whether to use the FOOT SW2 terminal as well as to specify conditions for using the terminal. ( . Page 70) 40 Using a Keyboard to Control Recording Recording operations of this DVD recorder can be carried out using the REC CONTROL panel displayed on the monitor. In addition, a keyboard can also be used when working with this panel. REC CONTROL panel is only displayed on the monitor of VIDEO LINE OUT and Y/C OUT terminals. It is not displayed on the monitor of DVI OUT terminal. Signal Connections Connect a keyboard to the USB terminals on the back of the DVD recorder. Settings . If the REC CONTROL panel is to be displayed on-screen, set REC CONTROL from the REMOTE MENU screen to ON. This panel will be displayed in Stop, Recording, and Recording Pause mode. To open the Setup Menu, press the DVD recorder’s SET UP button. Or, press the ESC key on the keyboard, and the set up menu will be displayed. Procedure 1. Start recording. Keyboard : Use the arrow keys (©,†, ., and v) to select Record (r) from the REC CONTROL panel, and then press the Enter key. 2. Pause recording. Keyboard : Use the arrow keys (©, †, ., and v) to select Pause (w) from the REC CONTROL panel, and then press the Enter key. . The DVD recorder will adopt Recording Pause mode; in addition, a chapter mark (index) and thumbnail will be inserted at the current position. 3. Restart recording. Keyboard : Use the arrow keys (©,†, ., and v) to select either Record (r) or Pause (w) from the REC CONTROL panel, and then press the Enter key. Steps 2 and 3 can be repeated to create a single, partitioned title. 4. End recording (i.e., close the title) Select Stop (q) from the REC CONTROL panel and press the Enter key. . The action of the DVD recorder following the end of recording depends on the setting of EDIT MENU from the DVD MENU screen. DISABLE : Recording is ended and the chapter menu is created using standard settings (i.e., the title is closed). ENABLE : The THUMBNAIL EDIT screen will appear. This screen can be used to modify the chapter menu’s display style, to change the thumbnails used, to input chapter names, and to perform other similar functions. For more details, refer to page 44. If additional recording is to be carried out, repeat steps 1 through 4 above. . In such a case, each subsequent recording will be stored as a new title. 5. End recording and remove the disc. Depending on how the disc will be used, one of two different procedures is implemented at this time. . If more content will be recorded to the disc using this DVD recorder: Simply press the DVD recorder’s OPEN/CLOSE button and remove the disc. (Do not finalize the disc before it is removed.) . If the disc is to be played on a different DVD player: Use FINALIZE from...