Votes - 5, Average rating: 4
(
)
)
|
manual abstract
If the TV is an older, “analog” TV, select Interlace. 4 Turn on the TV, then select the appropriate input source. For more information, see the documentation that came with the TV. Using your player Turning your player on or off To turn your player on or off: 1 Press Power. Your player turns on. 2 Press Power again to turn off your player. Using the remote control • Point the remote control toward the remote control sensor on the front of your player. • Make sure that no objects are between the remote control and the remote control sensor. • Do not expose the remote control to shock. • Do not expose the remote control to liquids or high humidity. • Do not place your player in a location where sunlight or bright light shines on the remote control sensor. This can interfere with the signal from the remote control. The following illustration shows the best angle for using the remote control. Selecting the video output mode You need to set the video output mode on your player to match the TV video type. If you connect a TV using the S-Video jack, select S-VIDEO. If you connect a TV using the component jacks, select P-SCAN if the TV is a high-definition or progressive scan capable TV or select Interlace if the TV is an older, “analog” TV. To select the video output mode: 1 Press SETUP. The on-screen menu opens. 2 Press or to select VIDEO, then press ENTER. 3 Press or to select the TV video type, then press ENTER. 4 Press SETUP to close the menu. CVBS VIDEO OUT OPTICAL OUT PUT Back of player S-Video cable Audio cable TV CVBS VIDEO OUT OPTICAL OUT PUT Back of player Audio cable TV Component video cable Warning When your player is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord. 30° 30° 19.7ft. (6 m) SYSTEM SETUP TV SYSTEM SCREEN SAVER VIDEO TV TYPE PASSWORD RATING DEFAULT LAST MEMORY Insignia NS-CADVD DVD Player Selecting the TV type Selecting the digital audio out mode To select the TV type: To select the digital audio out mode: 1 Press SETUP. The on-screen menu opens. 1 Press SETUP. The on-screen menu opens. SYSTEM SETUP SYSTEM SETUP TV SYSTEM SCREEN SAVER VIDEO TV TYPE PASSWORD RATING DEFAULT LAST MEMORY 2 Press or to select TV TYPE, then press ENTER. 3 Press or to select the TV type, then press ENTER. You can select: • 4:3 PANSCAN—Select if your player is connected to a standard TV. The left and right sides of a widescreen image are cropped. • 4:3 LETTERBOX—Select if your player is connected to a standard TV. The full widescreen image is displayed with black bars across the top and bottom of the screen. • 16:9—Select if your player is connected to a widescreen TV. 4 Press SETUP to close the menu. Selecting the TV system To select the TV system: 1 Press SETUP. The on-screen menu opens. SYSTEM SETUP TV SYSTEM SCREEN SAVER VIDEO TV TYPE PASSWORD RATING DEFAULT LAST MEMORY 2 Press or to select TV SYSTEM, then press ENTER. 3 Press or to select the TV system, then press ENTER. You can select: • AUTO—Select if you are not sure what system the TV uses. • PAL—Select if the TV uses the PAL system. • NTSC—Select if the TV uses the NTSC system. NTSC is the TV system commonly used in North America. 4 Press SETUP to close the menu. TV SYSTEM SCREEN SAVER VIDEO TV TYPE PASSWORD RATING DEFAULT LAST MEMORY 2 Press or to select , then press ENTER. The audio out menu opens. 3 Press or to select an option, then press ENTER. You can select: • S/PDIF OFF—Select if your player is not connected to a digital sound system. • S/PDIF RAW—Select if your player is connected to a digital sound system, and you want to listen to the audio in its original format. • S/PDIF PCM—Select if your player is connected to a digital sound system, and you want the audio converted to PCM format. 4 Press SETUP to close the menu. Playing a disc To play a disc: 1 Press EJECT on the front of your player or OPEN/CLOSE on the remote control to open the disc tray. 2 Insert a disc, label side up, into the tray, then press EJECT or OPEN/CLOSE to close the tray. 3 If the disc does not start playing automatically, press PLAY. 4 To stop playback, press STOP. Controlling disc playback To control disc playback: • Press PAUSE to pause playback. Press PLAY to resume playing. • Press NEXT or PREV to go to the next DVD chapter, CD track, or picture. • Press FWD or REV to fast forward or fast reverse. Each time you press one of these buttons, the speed changes from 1. to 2. to 8. to 20.. Press PLAY to resume normal playback. • Press SLOW to play forward in play motion. Each time you press this button, the speed changes from 1/2. to 1/3. to 1/4. to 1/5. to 1/7. normal speed. Press PLAY to resume normal playback. • If you are playing a DVD, press MENU to open the DVD disc menu, if the DVD has one. Some DVDs may not support this feature. • If you are playing a DVD, press TITLE to open the DVD title menu, if the DVD has one. Some DVDs may not support this feature. Insignia NS-CADVD DVD Player • If you...