Votes - 2, Average rating: 5
(
)
)
|
manual abstract
The “Disc Setting” display appears. 4 Select an option, and press ENTER. A“Disc Name”: Allows you to rename a disc. For details on how to enter characters, see page 63. Disc Setting 10:10 AM Disc Name : Disc Protect : Not Protected Disc Format : VR Mode Disc Finalize : Unfinalized Disc Information Erase All Titles Setup Disc Setting Edit Title List Timer Dubbing 234516 B “Disc Protect” (DVD+RWs/DVD-RWs (VR mode)/DVD-Rs (VR mode) only): Protects all titles on the disc when “Protected” is selected. To cancel the protection, select “Not Protected.” C “Disc Format” (DVD+RWs/DVDRWs/ DVD-Rs only): Erases all contents of the disc, including protected titles, and makes a blank disc (except DVD-Rs). For DVD-RWs, select a recording format (“VR Mode” or “Video Mode”) according to your needs. To format unused DVD-Rs in VR mode, select “VR Mode” and then “OK.” D “Disc Finalize”: Finalizes a disc. See page 91 for details. E “Disc Information”: Displays the following information. • Disc name • Disc type (and recording format for a DVD-RW (VR mode)/DVD-R (VR mode)) • Total number of titles • Protect setting • The oldest and most recent recording date • The total available recording time in each recording mode 10:10 AMDisc Information Disc Name Media Title No. Protected Date Remainder Disc 1 DVD-RW VR ModeFormat Original 6 / Playlist 1 Not Protected 4/05/2006 ~ 4/30/2006 HQ : 0H 57M LSP : 2H 23M EP : 5H 46M HSP : 1H 26M ESP : 2H 52M SLP : 7H 40M SP : 1H 55M LP : 3H 50M 4.4/4.7GB F “Erase All Titles” (DVD+RWs/DVDRWs/ DVD-Rs (VR mode) only): Erases all titles on the disc (except protected titles). Select “OK” when asked for confirmation. For DVD-RWs (VR mode)/DVD-Rs (VR mode), Playlist titles created with protected titles are also erased. To return to the previous display Press O RETURN. z Hints • You can set protection for individual titles (page 59). • By reformatting, you can change the recording format on DVD-RWs, or record again on DVD-RWs (Video mode) that have been finalized. Notes • You can label a disc using up to 32 characters; however, the name may not display on other DVD equipment. • You cannot label an unused DVD-R (Video mode) disc. Label the disc after you first record on it. • You cannot mix VR mode and Video mode on the same DVD-RW or DVD-R. • You cannot change the recording format on used DVD- Rs. • The recorder records on new DVD-Rs in Video mode unless you first format the discs in VR mode (page 49). DVD Editing VCR Playback Playing VCR Playback Playing 1 Press VIDEO to operate the VCR. 2 Insert a tape. Playback starts automatically if you insert a tape with its safety tab removed. 3 Press H PLAY. The front panel display shows the playing time. When the tape reaches the end, it will rewind automatically. To stop playback Press x STOP. To eject the tape Press Z OPEN/CLOSE. To turn off the power while rewinding (Rewind Shut Off) Press "/1 while the tape is rewinding. The power will turn off but the tape will keep rewinding until it reaches the end. To use the time counter Press CLEAR at the point where you want to find later. The counter in the front panel display resets to “0:00:00.” To search for the 0:00:00 point automatically, see page 75. To display the counter on the TV screen, press DISPLAY. Notes • During playback, the VCR automatically detects the recording system (S-VHS/VHS) and the recording mode (SP or EP) from the tape. LP mode recordings made on other equipment will play, but picture quality is not guaranteed. • The counter resets to “0:00:00” whenever a tape is reinserted. • The counter stops counting when it comes to a portion with no recording. • The counter resets to “0:00:00” after ten hours, and starts recounting. • When playback does not start even if you insert a tape with its safety tab removed, set “VCR Function” – “Auto Play” of “Features” to “On” in the “Setup” display (page 105). • If you switch to the VCR while playing a disc, DVD playback stops. • The VCR does not record in S-VHS format, but will play S-VHS tapes by automatically detecting the format, but picture quality will be lower than usual SVHS. Image may be unclear if playback options such as slow-motion, etc., are used. • Playback of S-VHS tapes recorded in EP (3x) mode is not guaranteed. • The VCR is not compatible with the PAL or SECAM color system. Only NTSC tapes can be played. • For simultaneous VHS and DVD operation, see page 9. Z OPEN/ CLOSE CLEAR DISPLAY H PLAY "/1 VIDEO TRACKING +/– x STOP Adjusting the picture (tracking) You can manually adjust tracking if the recording quality is too poor to be remedied by the VCR’s automatic tracking (a tracking meter appears during the automatic tracking). Press TRACKING +/–. The tracking meter appears. Press TRACKING +/– repeatedly until the distortion disappears. Tracking Tracking meter To resume automatic tracking Press TRACKING + and TRACKING – on the recorder at the same time for more than ten seconds. Or, eject the tape and reinsert it. VCR Playback Playback Options XP...