Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Please note your DVD+VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. 1. Insert a video cassette with protection tab into your DVD+VCR. The video cassette should have the window side facing up and the arrow facing away from you. 2. Press i. Press 1 or 2 to select REC ( ). Press ENTER/OK. 7. Press B to select the recording speed. Press v or V to select the desired tape speed (SP, IP, or LP). IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording the program. 3. Press ENTER/OK to start setting the timer record event. 4. Use the PR/TRK (v/V) to enter the station that you wish to record then press 2. Note: If all timer record events are full press v or V to select the event that you wish to remove and replace. Press b to delete the event. 5. Use the PR/TRK (v/V) to enter the date of the programme. If you press ENTER/OK before entering the date you may select one of the following automated recording features. Press 1 or 2 to select, then press ENTER/OK to confirm. DLY To record every day (except Saturday and Sunday) at the same time. SU~SA To record at the same time every week. 24 Operation with tape Operation with tape Timer recording using On Screen Display (Continued) 8. Press i to set another timer record event and follow steps 3 to 7. Check that the timer event details are correct. Press i return to screen. If PLEASE CHECK is displayed, you have entered incorrectly and will need to re-enter the data. 9. Press POWER to switch your DVD+VCR to Timer Standby mode. Note: The 1W Mode is not available in the standby mode for the timer recording. The timer symbol ( ) will appear in the display window while your DVD+VCR waits to make the recording. 10. Press POWER to end timer recording. Notes: • The DVD+VCR will automatically power off when Timer Recording ends. • During timer recording standby mode, the DVD and VCR mode cannot be operated. To use the DVD+VCR, press POWER. After you use the DVD or VCR, press POWER again to put the VCR into timer recording standby mode. • If at a later date you wish to delete or change any of the settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Use v or V to select the event that you wish to delete or change. Press b to delete the event...or Press ENTER/OK to change; then press b or B to select; Station, Date, Start and End times and recording speed. Press v or V to enter the correct information. • If Timer record events Overlap... Make sure that the preset times of the timer recording events do not overlap. If they do, the earlier programme will always be given priority. Example: Programme 1 is programmed to start at 16:00 and end at 17:00. Programme 2 is programmed to start at 16:30 and end at 17:30. (In this case, Programme 1 will be recorded in its entirety, but only the last 30 minutes of Programme 2 will be recorded.) • To watch a DVD while performing a timer recording, press DVD to select DVD mode. Operation 25 Additional Operation - VCR part Additional Operation - VCR part Hi-Fi Stereo Sound System This allows you to record and playback the sound in several different ways. Video cassettes recorded on your DVD+VCR will have a normal mono audio track and two Video tape Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio recordings in Hi- Fi stereo or bilingual mode from a TV broadcast, stereo audio system, video disc or another Hi-Fi VCR. 1. Your VCR’s allows you to enjoy broadcasts with standard stereo, bilingual and mono sound. The particular type of sound received or that recorded will be briefly displayed on the TV screen for a couple of seconds: STEREO Sound is automatically recorded on the Hi-Fi stereo and mono tracks of the video tape. BIL Both audio channels will be recorded on the Hi-Fi stereo tracks. The primary language channel (left) will be recorded on the mono track of the video tape. MONO The sound is recorded on the Hi-Fi tracks and the mono track of the video tape without any separation. 2. Press AUDIO repeatedly until the desired audio mode appears. 3. The choice is STEREO, LEFT, RIGHT and MONO. In BIL playback the primary language is output on the left channel and the secondary channel is output simultaneously from the right channel when audio output is set to STEREO. The primary language will be output from both channels when the audio setting is MONO. Please note that when adjusting the tracking control Hi-Fi stereo sound may revert to MONO. On Screen Display (F.OSD) You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your DVD+VCR on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. 1. Press CLK/CNT to display. Press CLK/CNT repeatedly to cycle through the display options. The tape counter and amount of tape...