Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
To solve the problem, turn off the unit and then turn it on again. • When you connect a HDMI or DVI compatible device make sure of HDMI Connection Connect the HDMI OUT jack on the unit to the HDMI input jack compatible TV using an HDMI cable. Unit TV Resolution Setting You can change the resolution for HDMI output. Press RESOLUTION repeatedly to select the desired resolution - 576i(480i), 576p(480p), 720p, 1080i, 1080p. The resolution may not be selected depending on the connection or TV. Note for 1080p resolution The unit is able to provide a 1080p full HD image to most 1080p-capable TVs in the market today. However, there are some 1080p TVs available from certain companies that are limited in the types of 1080p images that can be accepted. Specifically, 1080p-capable TVs that don’t accept images in 60Hz can’t display an image from this unit. About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players, Set-Top Boxes, and other AV devices. HDMI was developed to provide the technologies of HDCP (High-bandwidth Digital Content Protection). HDCP is used to protect digital content transmitted and received. HDMI has the capability to support standard, enhanced or high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs. Notes on HDMI connection • If your TV is not capable of handling 96 kHz set the [Sampling Freq.] option to [48 kHz] on the following: -Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit. - The connected device’s video input is set correctly for this unit. - The connected device is compatible with 720X576i(480i), 720X576p(480p), 1280X720p, 1920X1080i or 1920X1080p video input. - The 1080p, 720p and 576p(480p) resolutions are the progressive scan applied resolution. • Not all HDCP-compatible DVI devices will work with this unit. - The picture will not be displayed properly with non-HDCP device. 5 How to attach the Cable Cover If you want to, install it as shown below. Cable Cover Hooks Using the round shaped support To set up this unit on the table or other level space, rotate the round shaped support on the back of the unit to the arrow direction as show below. Wall Mounting If you want to, you can mount the unit You need to have hooks available that snugly back of the unit. Screw your hooks into the Wall 76 mm less than 8 mmless than 3 mm Ensure that the unit locks onto the hooks and that the hooks are strong enough to support the weight before releasing the hand. 6 Remote control a b c d • • • • • • • • • • • • • • a • • • • • • • • • • • • • POWER ( 1) : Switches the unit ON or OFF. OPEN/CLOSE ( Z) : Opens and closes the disc tray. AUDIO ( ) : Selects an audio language or audio channel. SUBTITLE ( ) : Selects a subtitle language. ANGLE ( ) : Selects a DVD camera angle, if available. SETUP : Accesses or exits the setup menu. • • • • • • • • • • • • • • b • • • • • • • • • • • • • SCAN ( m / M) : Search backward or forward. SKIP ( . / > ) : Go to next or previous chapter/track/File. PAUSE/STEP ( X) : Pauses playback temporarily/press repeatedly for frame-by-frame playback. PLAY (N) : Starts playback. STOP (x) : Stops playback. • • • • • • • • • • • • • • c • • • • • • • • • • • • • DVD MENU : Accesses the DVD menu. TITLE : Accesses the disc’s title menu, if available. l r o b : Navigates the menus. ENTER ( ) : Confirms menu selection. DISPLAY : Accesses On-Screen Display. RETURN ( O) : Press to move backwards in the menu or exit the menu. Change the USB mode. • • • • • • • • • • • • • • d • • • • • • • • • • • • • Numberical buttons: Selects numbered items in a menu. CLEAR : Removes a track number on the Program List. PROGRAM : Enters the program edit mode. A-B : Repeats a section. REPEAT : Repeats a chapter, track, title or all. ZOOM : Enlarges video image. RESOLUTION : You can change the resolution depending on your TV. Put the battery into the Remote Pinch the battery holder clip together tab to remove the battery holder. Insert the battery with the + facing in the same direction as the on the battery holder. Replace the battery holder with battery into the Remote Control unit making sure that it is fully inserted. • Replace Remote Control unit battery with 3V micro lithium cells such as CR. 2025 or its equivalent. • Dispose of battery safety in accordance with local laws. Do not dispose of in fire. Warning for replaceable lithium battery • Danger of explosion if battery incorrectly replaced. • Replace only with the same type battery. • Additional warning marking close to the battery if intended to be replaced by users. Warning...