Votes - 5, Average rating: 4.4
(
)
)
|
manual abstract
*2 DVP-NS52P only. z Hint For correct speaker location, see the operating instructions supplied with the connected components. A Connecting to audio L/R input jacks This connection will use your TV’s or stereo amplifier’s (receiver’s) two speakers for sound. Connect using the audio/video cord (not supplied). Yellow Yellow White (L) White (L) Red (R) Red (R) • Surround effect (page 44) TV: Dynamic Theatre, Dynamic, Wide, Night Stereo amplifier (receiver): Standard, Night B Connecting to a digital audio input jack If your AV amplifier (receiver) has a Dolby*1 Digital, DTS*2 or MPEG audio decoder and a digital input jack, use this connection. Connect using a coaxial or optical (DVPNS52P only) digital cord (not supplied). Coaxial cord Optical cord • Surround effect Dolby Digital (5.1ch), DTS (5.1ch), MPEG audio (5.1ch) *1 Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories. *2 “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. Notes • After you have completed the connection, make the appropriate settings in Quick Setup (page 22). If your AV amplifier (receiver) has an MPEG audio decoder function, set “MPEG” to “MPEG” in Audio Setup (page 69). Otherwise, no sound or a loud noise will come from your speakers. • The surround sound effects of this player cannot be used with this connection. • In order to listen to DTS sound tracks, you must use this connection. DTS sound tracks are not output through the LINE OUT L/R (AUDIO) jacks, even if you set “DTS” to “ON” in Quick Setup (page 22). Hookups ,continued Step 5: Connecting the Mains Lead Plug the player and TV mains lead (power cord) into a mains. Step 6: Quick Setup Follow the steps below to make the minimum number of basic adjustments for using the player. To skip an adjustment, press >. To return to the previous adjustment, press .. The on-screen display differ depending on the player model. 1 Turn on the TV. 2 Press [/1. 3 Switch the input selector on your TV so that the signal from the player appears on the TV screen. “Press [ENTER] to run QUICK SETUP” (press enter to run Quick Setup) appears at the bottom of the screen. If this message does not appear, select “QUICK” (quick) under “SETUP” (setup) in the Control Menu to run Quick Setup (page 65). 4 Press ENTER without inserting a disc. The Setup Display for selecting the language used in the on-screen display appears. The available languages differ depending upon the player model. ENTER LANGUAGE SETUP OSD: MENU: AUDIO: SUBTITLE: ITALIANO ESPANOL NEDERLANDS DANSK SVENSKA FRANCAIS ENGLISH ENGLISH DEUTSCH 5 Press X/x to select a language. The player displays the menu and subtitles in the selected language. 6 Press ENTER. The Setup Display for selecting the aspect ratio of the TV to be connected appears. SCREEN SETUP TV TYPE: 16:9 4:3 LETTER BOX 4:3 PAN SCAN FULL SCREEN SAVER: LINE: BACKGROUND: 4:3 OUTPUT: 16:9 7 Press X/x to select the setting that matches your TV type. . If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode • 16:9 (page 66) . If you have a 4:3 standard TV • 4:3 LETTER BOX or 4:3 PAN SCAN (page 66) 8 Press ENTER. The Setup Display for selecting the type of video signal output from the LINE (RGB)-TV jack appears. LINE: VIDEO VIDEO S VIDEO RGB 4:3 OUTPUT: SCREEN SETUP TV TYPE: 16:9 SCREEN SAVER: ON BACKGROUND: JACKET PICTURE 9 Press X/x to select the type of signal you want to output from the LINE (RGB)-TV jack. . Video signals • VIDEO (page 66) . S video signals • S VIDEO (page 66) . RGB signals • RGB (page 66) (DVP-NS52P only) When you select “RGB,” you will be unable to use the PROGRESSIVE button, and the player will not output video signals from the COMPONENT VIDEO OUT jacks. 10Press ENTER. The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears. YES NO Is this player connected to an amplifier (receiver) ? Select the type of jack you are using. LINE OUTPUT L/R (AUDIO) DIGITAL OUTPUT 11Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press ENTER. If you did not connect an AV amplifier (receiver), select “NO,” then go to step 15. If you connected an AV amplifier (receiver) using just an audio cord, select “YES: LINE OUTPUT L/R (AUDIO),” then go to step 15. If you connected an AV amplifier (receiver) using either a optical or coaxial digital cord, select “YES: DIGITAL OUTPUT.” 12Press X/x to select the type of Dolby Digital signal you wish to send to your amplifier (receiver). If your AV amplifier (receiver) has a Dolby Digital decoder, select “DOLBY DIGITAL.” Otherwise, select “D-PCM.” Hookups 13Press ENTER. “DTS” is selected. AUDIO SETUP AUDIO ATT: AUDIO DRC: DIGITAL OUT: DOLBY DIGITAL: MPEG: OFF STANDARD ON DOWNMIX: DOLBY SURROUND D-PCM D-PCM 48kHz/96kHz PCM: 48kHz/16bit DTS: DOLBY DIGITAL AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT:...
Other models in this manual:DVD Players - DVP-NS32 (1.06 mb)
DVD Players - DVP-NS52P (1.06 mb)