Votes - 4, Average rating: 4.3
(
)
)
|
Other manuals for this model:
manual abstract
For details, see “TV Type” on page 87. 11Press ENTER. The Setup Display for the component out jacks appears. 12Select an option. Select “On” if you are using the COMPONENT VIDEO OUT jacks. Otherwise, select “Off.” 13Press ENTER. The Setup Display for the LINE 3/DECODER jack appears. 14Select an option. Select “Yes” if you will connect a decoder to the LINE 3/DECODER jack. Otherwise, select “No.” 15Press ENTER. The Setup Display for selecting the type of video signal output from the LINE 1-TV jack appears. EASY SETUP Line1 Output 8/9 Select the Line1 output signal. S Video RGB Video 16Select the type of signal you want to output from the LINE1-TV jack. “Video”: Outputs video signals. “S Video”: Outputs S video signals. “RGB”: Outputs RGB signals. Note that if you select “On” in step 12, you cannot select “RGB,” and that if you select “Yes” in step 14, you cannot select “S Video.” • If you select “S Video” or “RGB,” SMARTLINK will be deactivated. 17Press ENTER. The Setup Display for selecting the type of jack used to connect to your amplifier (receiver) appears. EASY SETUP Audio Connection 9/9 Is this recorder connected to an amplifier (receiver)? Select the type of jack you are using. Yes : DIGITAL OUT Yes : LINE2 OUT(R-AUDIO-L) No 18Select the type of jack (if any) you are using to connect to an amplifier (receiver), and press ENTER. If you did not connect an AV amplifier (receiver), select “No,” then go to step 22. If you connected an AV amplifier (receiver) using just an audio cord, select “Yes: LINE 2 OUT (R-AUDIO-L),” then go to step 22. If you connected an AV amplifier (receiver) using either a digital optical or coaxial cord, select “Yes: DIGITAL OUT.” 19Select the type of Dolby Digital signal you wish to send to your amplifier (receiver). Audio Connection 9/9 Dolby Digital D-PCM Dolby Digital EASY SETUP If your AV amplifier (receiver) has a Dolby Digital decoder, select “Dolby Digital.” Otherwise, select “D-PCM.” 20Press ENTER. The Setup Display for the DTS signal appears. Audio Connection 9/9 DTS On Off EASY SETUP 21Select whether or not you wish to send a DTS signal to your amplifier (receiver), and press ENTER. If your AV amplifier (receiver) has a DTS decoder, select “On.” Otherwise, select “Off.” 22Press ENTER when “Finish” appears. Easy Setup is finished. All connections and setup operations are complete. EASY SETUP Easy Setup is finished. Finish Hookups and Settings To return to the previous step Press O RETURN. z Hints • If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 90). • If you want to run Easy Setup again, select “Easy Setup” in the Setup Display (page 96). Note To record TV programmes using the timer, you must set the clock accurately. Connecting a VCR or Similar Device After disconnecting the recorder’s mains lead from the mains, connect a VCR or similar recording device to the LINE IN jacks of this recorder. For RDR-GX700, use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack) (page 70). See also the instruction manual supplied with the connected equipment. To record on this recorder, see “Recording From Connected Equipment Without a Timer” (page 51). Connecting to the LINE 3 jack Connect a VCR or similar recording device to the LINE 3/DECODER jack of this recorder. AERIAL IN LINE 4 IN DIGITAL OUT COAXIAL OPTICAL PCM/DTS/MPEG/ DOLBY DIGITAL COMPONENT VIDEO OUT VIDEO S VIDEOAUDIOR L LINE 2 OUT VIDEO S VIDEOAUDIOR L Y PB / CB PR / CR ~ AC IN OUT LINE 1 - TV LINE 3 / DECODER TV DVD recorder to SCART input to i LINE1-TV VCR to i LINE 3/DECODER SCART cord (not supplied) Notes • Pictures containing copy protection signals that prohibit any copying cannot be recorded. • If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen. VCR Be sure to connect your VCR to the DVD recorder and your TV in the order shown below. To watch video tapes, watch the tapes through a second line input on your TV. VCR DVD recorder TV Line input 1 Line input 2 • The SMARTLINK features are not available for devices connected via the DVD recorder’s LINE 3/DECODER jack. • When you record to a VCR from this DVD recorder, do not switch the input source to TV by pressing the TV/DVD button on the remote. • If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected VCR. DVD recorder TV Connecting to the LINE 2 IN or LINE 4 IN jacks Connect a VCR or similar recording device to the LINE 2 IN or LINE 4 IN jacks of this recorder. If the equipment has an S-video jack, you can use an S-video cord instead of an audio/video cord. VCR, etc. OUTPUT S VIDEO AUDIO L R VIDEO Audio/video cord (not supplied) S VIDEO cord (not supplied) to LINE 2 IN DVD recorder (front) Hookups and Settings (rear) AERIAL IN LINE 4 IN DIGITAL OUT COAXIAL OPTICAL PCM/DTS/MPEG/ DOLBY DIGITAL COMPONENT VIDEO OUT VIDEO S VIDEOAUDIO R L LINE 2 OUT VIDEO S VIDEOAUDIO R L Y PB / CB PR / CR ~ AC IN OUT LINE...
Other models in this manual:DVD Players - RDR-GX300 (2 mb)