Votes - 0, Average rating: 0
(
)
)
|
manual abstract
If you have problems using this player, check the following points before you request service. If you still have a problem, register your player and get support at If you contact Philips, you will be asked for the model and serial number of this player. The model number and serial number are on the back of this player. Write the numbers here: Model No. ____________________________ Serial No. _____________________________ No picture. • The TV video input channel is not correctly selected (see the TV's user manual). • If you have changed a TV system setting, switch back to the default setting: 1) Press to open the disc compartment. 2) Press SUBTITLE. No picture on HDMI connection. • If this player is connected to an unauthorized display device, the audio/ video signal cannot be output. • If the HDMI cable is faulty, replace it with a new HDMI cable. • If you have changed the setting for HDMI video resolution, switch to its default mode. No sound output from the TV. • Make sure that the audio cables are correctly connected between this player and the TV. No sound during DivX video playback. • The audio codes are not supported. No sound on HDMI connection. • If the connected device is non-HDCP compliant or only DVI-compatible, no sound can be heard from the HDMI output. • Make sure that [HDMI Audio] is set to [On]. No audio output from the loudspeakers of the connected external audio device (for example, stereo system, amplifier receiver). • Make sure that the audio cables or coaxial cable are correctly connected. • Switch the external audio device to correct audio input source. Disc cannot be read. • Make sure that this player supports the disc (see "Specifications" > "Playable media"). • For a recorded disc, make sure that the disc is finalized. A USB storage device cannot be read. ••Make sure that the format of the USB storage device is compatible with this player (see "Specifications" > "USB"). ••Make sure that the file system on the USB storage device is supported by this player (see "Specifications" > "USB"). Files cannot be displayed or read. • Make sure that the number of files or folders does not exceed the supported limit of this player (maximum 648 files or 299 folders). • Make sure that this player supports these files (see "Specifications" > "File format"). DivX video files cannot be played. ••Make sure that the DivX video file is complete. ••Make sure that the file extension is correct. ••To play DivX DRM protected files from a USB storage device, connect this player to a TV through HDMI. DivX subtitles do not display correctly. ••Make sure that the subtitle file has the same name as the DivX video file. ••Make sure that the subtitle file has an extension name supported by this player (.srt, .sub, .txt, .ssa, or .smi). ••Select the character set that supports the subtitle (see "Use your DVD player" > "DivX videos"). EasyLink feature does not work. • Make sure that this player is connected to the Philips brand EasyLink TV, and the EasyLink option is turned on (see “Use your DVD player” > “Use Philips EasyLink”). EN 7 Safety and important notice Read and understand all instructions before you use this DVD player. If damage is caused by failure to follow the instructions, the warranty does not apply. Safety Risk of electric shock! • Never remove the casing of the player. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are split on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use. • Never place the product and accessories near naked flames or other heat sources, including direct sunlight. • Never insert objects into the ventilation slots or other openings on the product. • Where the mains plug or an appliance coupler is used as the disconnect device, it shall remain readily operable. • Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. • Disconnect the product from the power outlet before lightning storms. • When you disconnect the power cord, always pull the plug, never the cable. Risk of short circuit or fire! • Before you connect the product to the power outlet, make sure that the power voltage matches the value printed on the back or bottom of the product. • Avoid applying pressure on the power plugs. Loose power plugs can cause arcing or fire. Risk of injury or damage to the product! • To avoid exposure to laser radiation, do not disassemble. • Do not touch the optical lens inside the disc compartment. • Never place the product or any objects on power cords or on other electrical equipment. • If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet. Risk of overheating! • Never install this product in a confined ...