Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Allow at least 10 cm (4.0”) clearance from the rear and the top of the set and 5cm (2.0”) from the left and right to prevent overheating. 10cm (4.0") 10cm (4.0") 5cm (2.0") 5cm (2.0") Avoid high temperatures, moisture, water and dust – Apparatus shall not be exposed to dripping or splashing. – Do not place any sources of danger on the apparatus (e.g., liquid filled objects, lighted candles). Remote Control and two AAA batteries Supplied accessories Composite video cable (yellow) Audio cable (white, red) 01-43_DVP5140K_51_eng_RC3 8 04/07/06, 10:31 AM Connections EnglishConnecting TV AUDIO IN S-VIDEO IN VIDEO IN TV IN AUDIO IN S-VIDEO IN VIDEO IN TV IN 1 AUDIO IN S-VIDEO IN VIDEO IN TV IN AUDIO IN S-VIDEO IN VIDEO IN TV IN 21 IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your TV system. – Connect the DVD system directly to the TV. – A SCART connection will let you use features both Audio and Video on the DVD Player. Using SCART jack . Use the SCART cable (black) to connect the DVD Player’s SCART jack (TV OUT) to the corresponding Scart input jacks on the TV (cable not supplied). Helpful Hint: – Ensure that the “TV” indication on SCART cable is connected to the TV set and “DVD” indication on SCART cable is connected to the DVD Player. Using Composite Video jacks (CVBS) 1 Use the composite video cable (yellow) to connect the DVD Player’s CVBS (VIDEO) jack to the video input jack (or labeled as A/V In,Video In, Composite or Baseband) on the TV (cable supplied). 2 To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable supplied). 9 01-43_DVP5140K_51_eng_RC3 9 04/07/06, 10:31 AM Connections English AUDIO IN R L VIDEO IN TO TVINT IN CH3 CH4 2 1 Back of RF Modulator (example only) Antenna or Cable TV signal AUDIO IN V (Pr/Cr) U (Pb/Cb) Y S-VIDEO IN VIDEO IN COMPONENT VIDEO IN AUDIO IN V (Pr/Cr) U (Pb/Cb) Y S-VIDEO IN VIDEO IN COMPONENT VIDEO IN 21 RF coaxial cable to TV IMPORTANT! – The progressive scan video quality is only possible when using Y Pb Pr and a progressive scan TV is required. Using Component Video jacks (Y Pb Pr) 1 Use the component video cables (red / blue / green) to connect the DVD system’s Y Pb Pr jacks to the corresponding Component video input jacks (or labeled as Y Pb Pr) on the TV (cable not supplied). 2 To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect [AUDIO OUT (L/ R)] jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable supplied). 3 Proceed to page 16 for detailed Progressive Scan set up. IMPORTANT! – If your TV only has a single Antenna In jack (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. Using an accessory RF modulator 1 Use the composite video cable (yellow) to connect the DVD player’s CVBS (VIDEO OUT) jack to the video input jack on the RF modulator. 2 Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack. 10 01-43_DVP5140K_51_eng_RC3 10 04/07/06, 10:31 AM Connecting the power cord ~ AC MAINS AUDIO OUT V (Pr/Cr) U (Pb/Cb) Y S-VIDEO IN VIDEO IN COMPONENT VIDEO IN After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. When no disc is loaded, press STANDBY ON on the DVD Player front panel, “NO DISC” may appear on the display panel. NO DISC Connections 11 English 01-43_DVP5140K_51_eng_RC3 11 04/07/06, 10:31 AM Connections English Optional: Connecting to a Stereo Optional: Connecting Digital AV System Receiver AUDIO IN STEREO DIGITAL AUDIO IN DIGITAL AV Receiver Stereo system has Dolby Pro Logic or Right / Left Audio In jack Receiver has a PCM, Dolby Digital, or MPEG2 decoder 1 Select one of the video connections (CVBS VIDEO IN, SCART or COMPONENT VIDEO IN) depending on the options available on your TV. 2 Use the audio cables (white/red) to connect [AUDIO OUT (L/R)] jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable supplied). 12 01-43_DVP5140K_51_eng_RC3 12 1 Select one of the video connections (CVBS VIDEO IN, SCART or COMPONENT VIDEO IN) depending on the options available on your TV. 2 Connect the COAXIAL jack of the DVD player to the corresponding Digital Audio In jack on your Receiver (cable not supplied). 3 Set the DVD player’s Digital Output to PCM-ONLY or ALL depending on the capabilities of your Receiver (see page 31 “Digital Output”). Helpful Hint: – If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. 04/07/06, 10:31 AM Functional Overview Front and Rear Panels 9 STO...