Votes - 2, Average rating: 5
(
)
)
|
manual abstract
Reading / Writing Speed Reading Speed(MAX) DVD-ROM(16X), DVD-ROM DL(12X), DVD-R(16X), DVD-RW(12X), DVD+R(16X), DVD+RW(12X), CD-ROM(48X), CD-R(40X), CD-RW(40X), DVD+R DL(12X), DVD-R DL(12X), DVD-RAM(12X) Writing Speed(MAX) DVD+R DL(16X), DVD+RW(8X), DVD-R(22X), DVD+R(22X), DVD-RW(6X), CD-R(48X), CD-RW(32X), DVD-R DL(12X), DVD-RAM(12X) ( The maximum speed depends on the writing media condition or some of user PC environment. ) Select Model SH-S223L(TS-H663L)Light Scribe Select Languages English 1. Turn the PC off. 2. Open the cover as shown in the picture. 3. If necessary, attach the support devices on both sides of the drive - The support devices are PC accessories. Purchase a pair if necessary. (SCREW : M3 X 6 X 4 ) 4. Insert the DVD Writer after removing the plate as below. Be sure to use the screws (M3x6) provided with the product. - Using screws other than M3x6 may cause malfunction. Be sure that the screws are tightened securely in place. Loosely tightened screws may result in an increased level of noise. Select Model SH-S223L(TS-H663L)Light Scribe Select Languages English Connecting S-ATA Cable When you use one S-ATA cable a : Drive b : Mainboard When you have one DVD Writer and the other ODD products. a : Drive (S-ATA 1) b : Drive (S-ATA 2) c : Mainboard Select Model SH-S223L(TS-H663L)Light Scribe Select Languages English 1. Go to 2. Click Firmware on the menu bar (in the upper right-hand corner). 3. Click Firmware Downloads. Check for your drive model and start downloading. Select Model SH-S223L(TS-H663L)Light Scribe Select Languages English Confirming Using [Device Manager] Windows 2000 1. Click [Start] - [Settings] - [Control Panel] - [System] 2. Click on the [Hardware] tab in the System Properties window and then click on the [Device Manager] tab. 3. Click DVD-W drive in the Device Manager window. in the left picture appears if the driver is installed properly. Windows XP 1. Go to [Start] - [Settings] - [Control Panel] - [Performance and Maintenance] 2. Click [Administrative Tools] icon in the Performance and Maintenance window. 3. Click [Computer Management] icon in the Administrative Tools window. 4. Click [Device Manager] icon in the Administrative Tools window and then click DVD-W drive. in the left picture appears if the driver is installed properly. Windows Vista 1. Click [Start] - [Control Panel] - [System] -[Device Manager]. 2. Click DVD-W drive in the Device Manager window. in the left picture appears if the driver is installed properly. Select Model SH-S223L(TS-H663L)Light Scribe Select Languages English While the LED indicator is blinking green, do not turn the PC off, nor disconnect the DVD Writer. Otherwise it may cause damage to the drive. How to Use a Horizontally Installed Drive You can use 3.15 Inch or 4.72 Inch (8cm or 12cm) disc. The drive cannot read the disc properly if any part of the disc is placed outside the tray guiding line. How to Use a Vertically Installed Drive This drive can be installed vertically. You can use only the 4.72 Inch (12cm) disc. (You cannot use the 3.15 Inch (8cm) disc) The drive cannot read the disc properly if any part of the disc is placed outside the tray guiding line. Select Model SH-S223L(TS-H663L)Light Scribe Select Languages English The DVD Writer allows writing DVD±RW discs using Nero Express and enables "packet writing" (high-speed recording) using InCD. The drive also allows writing DVD±R discs using Nero Express. Unauthorized copying of DVD or software titles is illegal and the indiviDLs that make illegal copies will be held responsible for any copyright infringement. Using low-quality discs may lengthen the recording time or not supporting due to reduction in double speed. You can use the DVD Writer to playback Music CD, CD-ROM, CD-R/RW, or DVD-ROM disc like a CDROM drive or a DVD-ROM drive. If your computer recognizes the [CD-ROM] icon designated to the DVD Writer as the 'E:' drive, insert a CD-ROM or a DVD-ROM disc and access the 'E:' drive. (The actual drive letter of the DVD Writer may vary depending on the user's system environment.) If you want to use this product to play a commercial DVD-Video title('DVD title') Most of DVD titles in the market adopt the Dolby sound system. You are required to install software that supports Dolby decoding on your PC before you can play a DVD title using the DVD writer purchased. How to obtain commercial software supporting Dolby decoding. Visit the website of Nero: (You can use other compliant software if you want to.) DVD Region Protection Coding (RPC): The RPC feature is supported on DVD players and is used with DVD-video discs (such as movies). Currently, the motion picture industry has divided the world into different regions or zones that correspond to the regional markets into which the motion picture industry releases movies. Simply put, RPC codes are placed on movies marketed throughout the world, based on the region of the world inwhich they are being ...
Other models in this manual:DVD Players - SH-S223C (549.76 kb)
DVD Players - SH-S223F (549.76 kb)
DVD Players - SH-S223L (549.76 kb)
DVD Players - SH-S223M (549.76 kb)