Votes - 2, Average rating: 5
(
)
)
|
Other manuals for this model:
manual abstract
• You cannot control the recorder using another device or another recorder of the same model. • You cannot record date, time, or the contents of the cassette memory onto the disc. • If you record from a DV/Digital8 format tape that is recorded in multiple sound tracks, such as a tape with multiple sampling frequencies (48 kHz, 44.1 kHz, or 32 kHz), no sound or an unnatural sound will be output when playing back the sampling frequency switch point on the disc. • In order to use this recorder’s “Auto Chapter” setting (page 74), be sure to correctly set the clock on your digital video camera before shooting. • The recorded picture may be momentarily affected or the start and end points of a title may be different from what you have set if the source DV/Digital8 format tape is in any of the following conditions. In this case, connect your DV camcorder to the LINE IN jack and follow the instructions of “Recording from Connected Equipment” (page 47). – There is a blank space in the recorded portion of the tape. – The tape’s time code is not sequential. – If the picture size or the recording mode on the tape being dubbed changes. • A blank or black coloured screen will be dubbed when the recorder is set to a different colour system from the DV tape contents’ system. Set “Input Line System” in the “Basic” setup to the same colour system as the DV tape contents’ system (page 101). DV Camcorder Dubbing Dubbing an Entire DV Format Tape (DV One- Touch Dubbing) HDD +RW RWVR RWVideo +R RVR RVideo You can record the entire contents of a DV/ Digital8 format tape onto a disc with a single press of the ONE-TOUCH DUB button on the recorder. The recorder controls the DV camcorder for the whole process, and completes the recording. Follow steps 1 to 5 of “Preparing for DV camcorder dubbing” on page 74, and press ONE-TOUCH DUB on the recorder. The recorder rewinds the tape and then starts recording the tape contents. After the recording is finished, the recorder rewinds the tape in the DV camcorder, and finalises the recorded disc (except DVDRW/ DVD-R (VR mode)) automatically. To stop during recording Press and hold x REC STOP for more than 3 seconds. Note that it may take a few seconds for the recorder to stop recording. b Notes • When a blank space between the recordings on the tape continues for more than two minutes, DV One-Touch Dubbing ends automatically. • The recorder will pause recording when there is a blank space or an image containing copy protection signals on the tape. The recorder will resume recording automatically when receiving a recordable signal. • Finalisation is cancelled if a timer recording starts (except for DVD-RW/DVD-R (VR mode)). • DV One-Touch Dubbing ends automatically when there are images containing copy protection signals at the beginning of the tape. • When connecting digital video cameras to both DV IN jack and USB jack, pressing the ONETOUCH DUB button starts dubbing from the HDD camcorder. Disconnect the HDD camcorder from the USB jack to dub from the DV camcorder. Dubbing Selected Scenes (DV Manual Dubbing) HDD +RW RWVR RWVideo +R RVR RVideo You can select and dub scenes while playing a DV/Digital8 format tape. 1 Follow steps 1 to 5 of “Preparing for DV camcorder dubbing” on page 74. 2 Press SYSTEM MENU. The System Menu appears. 3 Select “HDD-Cam/DV,” and press ENTER. 4 Select “DV Manual Dubbing,” and press ENTER. 5 Select the recording destination, “Record to Hard Disk Drive” or “Record to DVD,” and press ENTER. 6 Press H. The scene starts to play. 7 Find the point on the DV/Digital8 format tape that you want to start dubbing from using m/M or c/ C, and press X. 8 Select “Start Rec.,” and press ENTER. The recorder starts dubbing. 9 Select “Pause Rec,” and press ENTER. The recorder pauses dubbing. 10 Repeat steps 6 to 9 to dub more scenes. 11 Select “Stop Rec,” and press ENTER. The selected scenes are dubbed as a single title. To exit “DV Manual Dubbing” Press SYSTEM MENU. z Hint You can turn off the dubbing menu by pressing the DISPLAY button during dubbing. Press the DISPLAY button again to display the dubbing menu. b Note You cannot set a scene to be shorter than one second. Playing from a DV Camcorder 1 Connect your DV camcorder to the DV IN jack on the front panel. 2 Press SYSTEM MENU. The System Menu appears. 3 Select “HDD-Cam/DV,” and press ENTER. 4 Select “DV Playback,” and press ENTER. 5 Start playback on the DV camcorder. Images from the DV camcorder appear on your TV screen. To cancel playback Press SYSTEM MENU. z Hint You can dub the playing tape contents. During playback, press HDD or DVD to select the dubbing destination, and press z REC. To stop dubbing, press x REC STOP. DV Camcorder Dubbing Music Jukebox Music Jukebox About Jukebox There are two methods to use Jukebox: connecting the USB device or copying audio tracks to the HDD. When using Jukebox, you can do following: • Store audio tracks on the HDD. • Play audio tracks using various play modes. • Label tracks, albums, or...
Other models in this manual:DVD Players - RDR-HX780 (6.22 mb)
DVD Players - RDR-HX980 (6.22 mb)
DVD Players - 3-293-880-11(1) (6.22 mb)