Votes - 1, Average rating: 3
(
)
)
|
Other manuals for this model:
manual abstract
B Lights up during Repeat Play. C Lights up when you can change the angle. D Playback information You can view the time and text information by pressing the TIME/ TEXT button on the remote repeatedly. The display changes as follows: When playing a DVD Current title playing time r Current title remaining time r Current chapter playing time r Current chapter remaining time r Text r Current title and chapter number (Returns to top automatically) When playing music or video files Current file*1 or track*2 playing time and number r Current file*1 or track name/MP3 ID3 track title*2 r Current album and file*1 or track*2 number (Returns to top automatically) *1 for video file *2 for music file When playing a VIDEO CD (without PBC functions) or CD Current track playing time and number r Current track remaining time r Disc playing time r Disc remaining time r Text Hookups and Settings When unpacking, check the supplied accessories by referring to page 47. b • Plug cords securely to prevent unwanted noise. • Refer to the operating instructions supplied with the components to be connected. • Be sure to disconnect the mains lead of each component before connecting. Step 1: Connecting to Your TV Connect this player to your TV using a video cord. Select one of the patterns A through D, according to the input jack on your TV. In order to view progressive signal (525p or 625p) pictures with a compatible TV, you must use pattern C. Select pattern B when connecting to a TV equipped with HDMI input. Hookups and Settings A VIDEO AUDIO INPUT L R TV (yellow) (white) (red) Audio/video cord (not supplied) D INPUT TV SCART cord (not supplied) (yellow) to LINE (RGB)-TV to LINE OUT (VIDEO) to HDMI OUT CD/DVD player L CENTER (green) (blue) (red) HDMI cord (not supplied) B HDMI IN TV Component video cord (not supplied) : Signal flow C PR/CR PB/CB Y COMPONENT VIDEO IN TV (green) (blue) (red) to COMPONENT VIDEO OUT ,continued b When connecting to a progressive TV, it is recommended that you use only pattern C. If you connect to your TV using both C and D, a special control signal transmitted via the SCART cord may cause the signal to be switched to the SCART jack. A Video input jack You will enjoy standard quality images. B HDMI/DVI input jack Use a certified Sony HDMI cord to enjoy high quality digital picture and sound through the HDMI OUT jack. When connecting to a Sony TV that is compatible with the CONTROL FOR HDMI function, see page 13. When connecting to the HDMI OUT jack Follow the steps below. Improper handling may damage the HDMI OUT jack and the connector. 1 Carefully align the HDMI OUT jack on the back of the player and the HDMI connector by checking their shapes. Make sure the connector is not upside down or tilted. Connector is upside Not straight down 2 Insert the HDMI connector straight into the HDMI OUT jack. Do not bend or apply force to the HDMI connector. To connect to a TV with DVI input Use an HDMI-DVI converter cord (not supplied). The DVI jack will not accept any audio signals, so you have to use another audio connection in addition to this connection (page 14). Furthermore, you cannot connect the HDMI OUT jack to DVI jacks that are not HDCP compliant (e.g., DVI jacks on PC displays). C Component video input jacks (Y, PB/CB, PR/CR) You will enjoy accurate colour reproduction and high quality images. D SCART input jack Be sure to make the connections firmly to avoid hum and noise. When you connect using the SCART cord, check that the TV conforms to RGB signals. Refer to the operating instructions supplied with the TV to be connected. Also, when you set “LINE” to “RGB (COMPONENT OFF)” under “SCREEN SETUP” in the Setup Display (page 35), use a SCART cord that conforms to each signal. When connecting to a standard 4:3 screen TV Some images may not fit your TV screen. To change the picture size, see page 35. b • Do not connect more than one type of video cord between the player and your TV at the same time. • Do not use connections B and D at the same time. • Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the player to this jack. • When you connect the player to your TV via the SCART jack, the TV’s input source is set to the player automatically when you start playback. In this case, press TV t (input select) on the remote to return the input to the TV. • If you set “LINE” in “SCREEN SETUP” to “RGB (COMPONENT OFF)” (page 35), the player outputs no component video signals. • Be sure to disconnect the HDMI cord when moving the player. • Do not apply too much pressure to the cabinet wall, if you place the player on the cabinet with the HDMI cord connected. It may damage the HDMI OUT jack or the HDMI cord. • When connecting or disconnecting, do not screw in or rotate the HDMI connector. Hookups and Settings When you play a disc recorded in the NTSC colour syste...
Other models in this manual:DVD Players - DVP-NS728H (923.73 kb)