Votes - 3, Average rating: 4.3
(
)
)
|
Photos and specs Sony RDR-HXD1070 |
Other manuals for this model:
manual abstract
To register a new password, see “Set Password/Change Password” on page 145. 2 Select “Standard,” and press ENTER. 3 Enter your four-digit password using the number buttons, and press ENTER. playback limitation level, and press ENTER. The area is selected. • When you select “Number,” press the number buttons to select and enter a country/area code in the table (page 168), and press ENTER. 5 Select “Change Level,” and press ENTER. 6 Enter your four-digit password using the number buttons, and press ENTER. 7 Select the level. The lower the value, the stricter the limitation. Discs rated higher than the selected level will be restricted. 8 Press ENTER. The DVD Playback setting is completed. To cancel the DVD Playback setting for the disc, select “Off” in step 7. D.TV Age Limit Viewing of some digital TV programmes can be limited according to the age limit you set. To watch programmes that exceed the age limit you set, your password is required. (for customers in France/Denmark/Finland, or Sweden only) 1 Select “D.TV Age Limit” in “Parental Lock,” and press ENTER. 2 Select “Next Screen,” and press ENTER. The “D.TV Age Limit” display appears. 3 Enter your four-digit password using the number buttons, and press ENTER. 4 Select an age as limitation level, and press ENTER. The setting is completed. To cancel the setting, select “Off.” HDMI Settings (HDMI Output) The “HDMI Output” setup allows you to adjust items related to the HDMI connection. You can select “HDMI Output” only when connecting equipment to the HDMI OUT jack. 1 Press SYSTEM MENU while the recorder is in stop mode. 2 Select “Initial Setup,” and press ENTER. 3 Select “HDMI Output,” and press ENTER. The “HDMI Output” setup appears with the following options. The default settings are underlined. After connecting equipment to the HDMI OUT jack, “Screen Resolution,” “4:3 Video Output,” and “Colour” are automatically set to the appropriate settings. Screen Resolution Selects the type of video signals output from the HDMI OUT jack. If the picture is not clear, natural or to your satisfaction, try another option that suits the disc and your TV/projector, etc. For details, refer also to the instruction manual supplied with the TV/ projector, etc. 720 x 576p*1 Sends 720.576p video signals. 720 x 480p*2 Sends 720.480p video signals. 720 x 576i*1 Sends 720.576i video signals. 720 x 480i*2 Sends 720.480i video signals. *1 Can be selected only when “Input Line System” is set to “PAL/SECAM” in the “Basic” setup (page 130). *2 Can be selected only when “Input Line System” is set to “NTSC” in the “Basic” setup (page 130). b Notes • When picture noise appears after you change the “Screen Resolution” setting, hold down x (stop) on the recorder, and press Z (open/close) on the recorder. • When “Colour” is set to “YCbCr 4:2:2” in the “HDMI Output” setup, you cannot select “720 x 576i” (or “720 x 480i”). 4:3 Video Output This setting is effective only when you set “TV Type” to “16:9” in the “Playback” setup. Adjust this setting to watch 4:3 aspect ratio signals. If you can change the aspect ratio on your TV, change the setting on your TV, not this recorder. Note that this setting is effective only for HDMI connection. Full Select this when you can change the aspect ratio on your TV. Normal Select this when you cannot change the aspect ratio on your TV. Shows a 4:3 size video with the aspect ratio as it is. Settings and Adjustments 1920 x 1080p Sends 1920.1080p video signals. 1920 x 1080i Sends 1920.1080i video signals. 1280 x 720p Sends 1280.720p video signals. 16:9 aspect ratio TV ,continued Colour HDMI Control Selects the method of outputting video signals for the HDMI jack. RGB (0-255) Outputs RGB (0-255) signals. Select this when connecting to an RGB (0255) device. RGB (16-235) Outputs RGB (16-235) signals. Select this if colours appear overly rich and the black appears too deep. YCbCr 4:2:2 Outputs 10-bit YCbCr 4:2:2 component signals. YCbCr 4:4:4 Outputs 8-bit YCbCr 4:4:4 component signals. On Allows you to use the HDMI control features (page 21). Off Turns off the function. b Notes • Some settings may not be available depending on the connected device. • When a DVI device is connected, you cannot select “YCbCr 4:2:2” or “YCbCr 4:4:4.” • When “Screen Resolution” is set to “720 x 576i” (or “720 x 480i”) in the “HDMI Output” setup, you cannot select “YCbCr 4:2:2.” Audio Output Selects the type of audio signal output from the HDMI OUT jack. Auto Outputs Dolby Digital, MPEG and DTS audio signals as a bitstream signal. Normally select this position. PCM Converts all audio signals except for DTS signals to PCM. Bitstream Priority Select this if the connected device is compatible with bitstream audio. b Notes • The PCM signals may not be output even when you select “Auto” depending on the “Audio Out” settings, number of audio channels, and the HDMI-connected device. • The “Audio Output” function is not available when a DVI device is connected. Other Settings (Options) The “O...
Other models in this manual:DVD Players - RDR-HXD770 (9.86 mb)
DVD Players - RDR-HXD870 (9.86 mb)
DVD Players - RDR-HXD970 (9.86 mb)