Votes - 3, Average rating: 4.3
(
)
)
|
Photos and specs Sony DVP-FX850 |
Other manuals for this model:
manual abstract
Example: “General Setup” ENTER RETURN General Setup TV Display Angle Mark 16 : 9 On On On Screen Saver PBC Select: Cancel: DivX Default Selected item Setup items 4 Press X/x to select an item, then press ENTER. The settings for the selected item appear. Example: “TV Display” Settings and Adjustments General Setup TV Display Angle Mark Screen Saver Default Select: Cancel: Settings ENTER RETURN 4 : 3 Pan Scan 4 : 3 Letter Box 16 : 9 OnPBC DivX 5 Press X/x to select a setting, then press ENTER. The setting is selected and setup is complete. Example: “4:3 Pan Scan” Selected setting ENTER RETURN General Setup TV Display Angle Mark 4 : 3 Pan Scan On On On Screen Saver PBC Select: Cancel: DivX Default ,continued To turn off the Setup Display Press OPTIONS or O RETURN twice. Settings for the Display (General Setup) Choose playback display options and settings according to the TV to be connected. Select “General Setup” in the Setup Display. To use the display, see “Using the Setup Display” (page 33). The default settings are underlined. ENTER RETURN General Setup TV Display Angle Mark 16 : 9 On On On Screen Saver PBC DivX Default Select: Cancel: . TV Display (DVD only) Selects the aspect ratio of the connected TV (4:3 standard or wide). 4:3 Pan Scan Select this when you connect a 4:3 screen TV. Automatically displays a wide picture on the entire screen and cuts off the portions that do not fit. 4:3 Letter Box Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen. 16:9 Select this when you connect a wide-screen TV or a TV with a wide mode function. 4:3 Pan Scan 4:3 Letter Box 16:9 Note Note Depending on the DVD, “4:3 Letter Box” may be selected automatically instead of “4:3 Pan Scan” or vice versa. . Angle Mark Displays the angle mark when you can change the viewing angles during playback of DVDs recorded with multi-angles. On Display the angle mark. Off Hide the angle mark. . Screen Saver The screen saver image appears when you leave the player in pause or stop mode for 15 minutes. The screen saver will help prevent your display device from becoming damaged (ghosting). Press H to turn off the screen saver. On Activates the screen saver function. Off Deactivates the screen saver function. . PBC By using the PBC (Playback Control) function, you can enjoy playing interactive programmes and programmes with search functions (page 20). This set up is effective when you play back VIDEO CDs with the PBC function. Set up becomes available by opening and closing the disc lid after setting. On By the PBC function, you can play back VIDEO CDs via the menu screen. Off Turn off the PBC function. . DivX Displays the registration code for this player. For more information, go to on the Internet. . Default Each function returns to its original factory settings. Note that all of your settings will be lost. Settings for the Sound (Audio Setup) “Audio Setup” allows you to set the sound according to the playback and connection conditions. Select “Audio Setup” in the Setup Display. To use the display, see “Using the Setup Display” (page 33). The default settings are underlined. Settings and Adjustments ENTER RETURN Audio Setup Audio DRC Digital Output Off On Select: Cancel: . Audio DRC (Dynamic Range Control) (DVD only) Makes the sound clear when the volume is turned down when playing a DVD that conforms to “Audio DRC.” This function affects the output from the following jacks: – AUDIO jack – OPTICAL OUT jack only when “Dolby Digital” is set to “Downmix PCM” (page 36). On Makes low sounds clear even if you turn the volume down. Off Normally select this position. . Digital Output Selects if audio signals are output via the OPTICAL OUT jack. On Normally select this position. When you select “On,” see “Setting the digital output signal” for further settings. Off The influence of the digital circuit upon the analog circuit is minimal. ,continued Setting the digital output signal Switches the method of outputting audio signals when you connect an audio equipment such as an AV amplifier (receiver) with the OPTICAL OUT jack. For connection details, see page 39. After setting “Digital Output” to “On,” select “Dolby Digital” and “DTS.” If you connect a component that is incompatible with the selected audio signal, a loud noise (or no sound) may be heard from the speakers, damaging your ears or speakers. . Dolby Digital (DVD only) Selects the type of Dolby Digital signal. Downmix Select this when the player is PCM connected to an audio component without a built-in Dolby Digital decoder. Dolby Digital Select this when the player is connected to an audio component with a built-in Dolby Digital decoder. . MPEG (DVD only) Selects the type of MPEG audio signal. PCM Select this when the player is connected to an audio component without a built-in MPEG decoder. If you play multi-channel MPEG audio sound tracks, only the Front (L) and Front (R) signals will be out...