Votes - 2, Average rating: 3.5
(
)
)
|
Other manuals for this model:
manual abstract
For Asian models only To change the colour system The colour system of the player is set to NTSC or PAL. If the on-screen menu of the player does not appear on the TV, change the colour system of the player to the same colour system (PAL or NTSC) of your TV. To change the colour system, hold ?/1 down for a few seconds while pressing X on the player. Step 4: Playing a Disc The labeled (or non-playback) side appears through the disc window. A Turn on the TV. B Press [/1 on the player. C Switch the input selector on your TV so that the signal from the player appears on the TV screen. D Insert the disc in the player so that the labeled (or non-playback) side appears through the disc window. E Press N. The player begins playing the disc. After Step 5 Depending on the disc, a menu may be displayed on the TV screen. If so, select the item you want from the menu and play the DVD (page 35) or VIDEO CD disc (page 36). To stop playing Press x. To remove the disc Press A. Remove the disc from the player. To turn off the player Press [/1. The player enters standby mode and the power indicator lights up in red. Hookups Hookups Hooking Up the Player Follow Steps 1 to 5 to hook up and adjust the settings of the player. Before you start, disconnect the power cords, check that you have all of the supplied accessories, and insert the batteries into the remote (page 14). Remove the jack cover (page 10). Hookups Notes • Plug cords securely to prevent unwanted noise. • Refer to the instructions supplied with the components to be connected. c continued Step 1: Connecting the Video Cords Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord. Select one of the patterns A through C, according to the input jack on your TV monitor, projector, or AV amplifier (receiver). Component video cord (not supplied) TV, projector or AV amplifier (receiver) (green) S VIDEO cord (not supplied) TV, projector or AV amplifier (receiver) (red) (blue) (green) (blue) (red) Control S cord (not supplied) to CONTROL S IN to COMPONENT to S VIDEO OUT TV or video component with CONTROL S jack (green) (blue) (red) l : Signal flow (yellow) Audio/video cord (supplied) CD/DVD player TV, projector or AV amplifier (receiver) (yellow) to VIDEO OUT VIDEO OUT Audio/video cord (supplied) TV EURO AV adaptor (supplied with some models) (yellow) (yellow) (yellow) A If you are connecting to a video input jack Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will enjoy standard quality images. Yellow (Video) White (L) Red (R) Yellow (Video) White (L) Red (R) Use the red and white plugs to connect to the audio input jacks (page 22). (Do this if you are connecting to a TV only.) Hookups B If you are connecting to an S VIDEO input jack Connect an S VIDEO cord (not supplied). You will enjoy high quality images. C If you are connecting to a SCART (EURO AV) input jack Connect the supplied EURO AV adaptor to the SCART (EURO AV) input jack of the TV and connect the player and the EURO AV adaptor using the audio/video cord (supplied). Connect the yellow plugs of the audio/video cord to the yellow (video) jacks. Use the red and white plugs to connect the audio input jack (page 22). Red (R)White (L) Yellow (Video) Yellow (Video) White (L) TV Red (R) EURO AV adaptor D If you are connecting to a monitor, projector, or AV amplifier (receiver) having component video input jacks (Y, CB, CR) Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate colour reproduction and high quality images. Green Blue Red Green Blue Red If your TV or video component has a CONTROL S connector You can control the player by pointing the remote at the remote sensor on the TV or video component. This feature is convenient when you placed the player and the TV or video component away from each other. Connect the TV or video component via the CONTROL S IN connectors using the control S cord (not supplied). Refer to the instructions supplied with the component to be connected. c continued Notes Notes • Connect the player directly to the TV. If you pass the player signals via the VCR, etc., you may not receive a clear image on the TV screen. VCR CD/DVD player TV Connect directly When you play a disc recorded in the NTSC colour system, the player outputs the video signal or the Setup Display etc. in the NTSC colour system and the picture may not appear on the PAL colour system televisions. In this case, remove the disc. • For Asian models only You can switch the player’s colour system to match the colour system of the connected TV (page 15). Step 2: Connecting the Audio Cords Refer to the chart below to select the connection that best suits your system. Be sure to also read the instructions for the components you wish to connect. Select a connection Select one of the following connections, A through D ...