|
Photos and specs Sony RDR-HX750 |
Other manuals for this model:
manual abstract
11 Select “Next Screen,” and press ENTER. Setting external decoder (PAYTV/ Canal Plus analogue decoder) programme positions SYSTEM MENU ORETURN ,continued 12 Select your country/region, and press ENTER. Programme position 13 Select the desired programme position using ./> or number buttons. 14 Select “Channel” using M/m. 15 Select the external decoder programme position using ,. 16 Select “Sound System” using M/m. 17 Press , to select an available TV system, B/G, D/K, I, or L. To receive broadcasts in France, select “L.” 18 Select “Decoder” using M/m. 19 Select “On” using ,, and press ENTER. To return to the previous step Press O RETURN. b Note If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected decoder. Eight Basic Operations — Getting to Know Your DVD Recorder Eight Basic Operations — Getting to Know Your DVD Recorder 1. Inserting a Disc +R DVD VCD CD DATA CD RWVR RWVideo+RW RVR DATA DVD RVideo Z (open/ close) DVD 1 Press DVD. 2 Press Z (open/close), and place a disc on the disc tray. Recording/playing side facing down 3 Press Z (open/close) to close the disc tray. Wait until “LOAD” disappears from the front panel display. Unused DVDs are formatted automatically. • For DVD-RW discs DVD-RWs are formatted in the recording format (VR mode or Video mode) set by “Format DVD-RW” of “Basic” in the “Disc Setup” setup (page 108). • For DVD-R discs DVD-Rs are automatically formatted in Video mode. To format an unused DVD-R in VR mode, format the disc in the “Format” setup (page 42) before you make a recording. If the disc is recordable on this recorder, you can manually re-format the disc to make a blank disc (page 42). 2. Recording a Programme HDD +RW RWVR RWVideo +R RVR RVideo This section introduces the basic operation to record a current TV programme to the hard disk (HDD) or to a disc (DVD). For an explanation of how to make timer recordings, see page 51. HDD DVD PROG +/– TV/DVD DISPLAY TV PAUSE z REC REC MODE x REC STOP TV t 1 Press HDD or DVD. If you want to record to a DVD, insert a recordable DVD. 2 Press PROG +/– to select the programme position or input source you want to record. ,continued 31 Eight Basic Operations Getting to Know Your DVD Recorder 3 Press REC MODE repeatedly to select the recording mode. Each time you press the button, the display on the TV screen changes as follows: * Available when “Manual Rec. Mode” is set to “On (go to setup)” in the “Recording” setup (page 118). For more details about the recording mode, see page 51. 4 Press z REC. Recording starts. When recording to the HDD, recording stops after 12 hours of continuous recording or when the HDD is full. When recording to a DVD, recording stops when the DVD is full. To stop recording Press x REC STOP. Note that it may take a few seconds for recorder to stop recording. To watch another TV programme while recording If your TV is connected to the T LINE 3 – TV jack, set your TV to the TV input using the TV/DVD button and select the programme you want to watch. If your TV is connected to the LINE 2 OUT or COMPONENT VIDEO OUT jacks, set the TV to TV input using the TV t button (page 21). TV Direct Rec. (for SMARTLINK connections only) When the TV is turned on and the recorder is turned off, press TV PAUSE. The recorder automatically turns on and starts recording what you are watching on the TV to the HDD. Set “TV Pause” to “TV’s Tuner” in the “Options 2” setup (page 127). b Notes • To turn off the TV Direct Rec. function, set “SMARTLINK” to “Pass Through” in the “Options” setup (page 126). • If you press the [/1 button while recording, the recorder stops recording and turns off. • After pressing the z REC button, it may take a short while to start recording. • You cannot change the recording mode while recording. • If there is a power failure, the programme you are recording may be erased. • You cannot watch a PAY-TV/Canal Plus programme while recording another PAY-TV/ Canal Plus programme. • To use the TV Direct Rec. function, you must first correctly set the recorder’s clock. Checking the disc status while recording You can check the recording information such as recording time or disc type. Press DISPLAY during recording. The recording information appears. ARecording mode BRecording time CDisc type/format DRecording status Press DISPLAY to turn off the display. 33 Eight Basic Operations — Getting to Know Your DVD Recorder 3. Playing the Recorded Programme (Title List) To play a recorded title, select the title from the Title List. 1 Press HDD or DVD. If you select DVD, insert a DVD (see “1. Inserting a Disc” on page 31). Playback starts automatically depending on the disc. 2 Press TITLE LIST. To show the 8-Title List, press < to select “Title View,” and press ENTER, then select “8 Titles” using M/m, and press ENTER. 4-Title List (Example: HDD) 8-Title List A Disc type: Displays the media type, HDD or DVD. B Total number of titles C Sub-menu:...