Votes - 5, Average rating: 4.6
(
)
)
|
Other manuals for this model:
manual abstract
,continued 31 Choose the item that matches the audio connection you selected on pages 26 to 28 ( B through D ). B-2 C-2 • D-PCM (page 80) D-2 • DTS (only if the amplifier (receiver) has a DTS decoder) (page 80) 13Press ENTER. . When “DIGITAL OUTPUT” is selected in step 9 • Quick Setup is finished and connections are complete. • If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 80). . When “DIGITAL & 5.1CH OUTPUT” is selected in step 9 • The Setup Display for “SPEAKER SETUP” appears. 14Press X/x to select the size of the center speaker. If no center speaker is connected, select “NONE” (page 81). SPEAKER SETUP (DVD) SIZE: DISTANCE: LEVEL(FRONT): LEVEL(REAR): OFFTEST TONE: FRONT: CENTER: NONE SMALL LARGE LARGE REAR: SUBWOOFER: LARGE 15Press ENTER. “REAR” is selected. SPEAKER SETUP (DVD) SIZE: DISTANCE: LEVEL(FRONT): LEVEL(REAR): OFFTEST TONE: FRONT: CENTER: LARGE REAR: SUBWOOFER: LARGE LARGE NONE SMALL LARGE 16Press X/x to select the size of the rear speakers. If no rear speaker is connected, select “NONE.” 17Press ENTER. “SUBWOOFER” is selected. SPEAKER SETUP (DVD) SIZE: DISTANCE: LEVEL(FRONT): LEVEL(REAR): OFFTEST TONE: FRONT: CENTER: LARGE LARGE REAR: SUBWOOFER: YES YES NONE LARGE 18Press X/x to select whether or not you have connected a subwoofer. 19Press ENTER. Quick Setup is finished. All connections and setup operations are complete. Enjoying the surround sound effects To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 26 to 28 ( B through D ). Each of these is the default setting and does not need to be adjusted when you first connect the player. Refer to page 73 for using the Setup Display. Audio Connection (pages 25 to 28) A • No additional settings are needed. B-1 C-1 • Set “DOWNMIX” to “DOLBY SURROUND” (page 79) B-2 C-2 D-2 • Set “DOWNMIX” to “DOLBY SURROUND” (page 79). • Set “DIGITAL OUT” to “ON” (page 79). D-1 • Set “DISTANCE,” “LEVEL(FRONT),” and “LEVEL(REAR)” according to the connected speakers (page 81). z Hints • For connections B-2 C-2 D-2 Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency (page 80). • For connections B-1 C-1 D-1 If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 78). Hookups Playing Discs Playing Discs Playing Discs Playing Discs Refer to the operating instructions supplied with your disc. ./> Power indicator A dial A [/1 VIDEO OFF indicator H Z [/1 Scroll key H 1 Turn on your TV. 2 Press [/1. The player turns on and the power indicator lights up in green. 3 Switch the input selector on your TV so that the signal from the player appears on the TV screen. .When using an amplifier (receiver) Turn on the amplifier (receiver) and select the appropriate channel so that you can hear sound from the player. 4 Press A on the player, and place Depending on the DVD or VIDEO CD, some operations may be different or restricted. a disc on the disc tray. With the playback side facing down 5 Press H. The disc tray closes, and the player starts playback (continuous play). Adjust the volume on the TV or the amplifier (receiver). Depending on the disc, a menu may appear on the TV screen. For DVD VIDEOs, see page 38. For VIDEO CDs, see page 41. To enjoy the clarity of Super Audio CD/CD sound more You can minimize the effect of the video output by switching it off. Toggle the scroll key up or down to display “VIDEO OFF” in the LCD screen. Then point the remote to the player and press down on the scroll key once so that appears in the LCD screen. When no video signal is output from the player, the VIDEO OFF indicator lights up on the player. To turn off the player Press [/1. The player enters standby mode. z Hint The player will turn off automatically whenever you leave it in stop mode for more than 30 minutes (Auto Power Off function). Note Super Audio CD audio signals are not output from the digital jack. Additional operations Locking the disc tray (Child Z REPLAY ./> x X H To Operation Stop Press x Pause Press X Resume play after Press X or H pause Go to the next chapter, Press > on the track, or scene in remote, or briefly turn continuous play mode the ./> dial on the player clockwise Go back to the Press . on the previous chapter, remote, or briefly turn track, or scene in the ./> dial on continuous play mode the player counterclockwise Stop play and Press Z remove the disc Replay the previous Press REPLAY scene (DVD VIDEO only) z Hint The Replay function is useful when you want to review a scene or dialog that you missed. Notes •You may not be able to use the Replay function with some scenes. • The Replay function does not work with DVD+RWs. Lock) You can lock the disc tray to prevent children from opening it. Playing Discs When the player is in standby mode, press O RETURN, ENTER, and then [/1 on the remote. The player t...