Votes - 6, Average rating: 4
(
)
)
|
manual abstract
After connecting the unit to a television using an HDMI cable, set “Ctrl with HDMI” to “On”. (. 63) .It is recommended that you use Panasonic’s HDMI cable. Recommended part number: RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.), etc. .Non-HDMI-compliant cables cannot be utilized. .Set the HDAVI Control operations on the connected equipment (e.g., television). Turn on all HDAVI Control compatible equipment, turn the television off and on, and then select this unit’s input channel on the connected television so that the HDAVI Control function works properly. Also when the connection or settings are changed, repeat this procedure. Automatic input switching When the following operations are performed the television will automatically switch the input channel and displays the corresponding action. –When play starts on the unit –When an action that uses the display screen is performed (e.g., Direct Navigator screen, scheduled recording screen) Power on link When the television is off and the following operations are performed, the television will automatically turn on and displays the corresponding action. (Picture or sound may not be available for the first few seconds.) –When play starts on the unit –When an action that uses the display screen is performed (e.g., Direct Navigator screen, scheduled recording screen) Power off link All connected equipment compatible with HDAVI Control including this unit automatically turns off when you switch the television off. .The unit automatically turns off even when the FUNCTIONS screen, any of the status messages, or any of the on-screen menus is displayed on the television. The unit automatically turns off while in playback or when scheduled to record. (In the latter case, scheduled recordings remain effective after the unit turns off). .Only this unit turns off when you press [I DVD POWER] for shutting it down. Other connected equipment compatible with HDAVI Control stay on. [Note] .Even if the television is turned off, the unit will not turn off at the same time in the following conditions: –When you pressed [. REC] and the unit is still recording –When copying –When finalizing For your reference .When [1] (PLAY) is pressed on this unit for “Automatic input switching” or “Power on link”, the playback image is not immediately displayed on the screen and it may not be possible to watch the contents from where playback started. In this case, press [:] or [6] to go back to where playback started. .When the DIGITAL AUDIO OUT (OPTICAL) terminal is used for RQT8365 audio output and the unit is connected to the television with an HDMI cable, set “HDMI Audio Output” to “Off” in the setup menu. (. 63) STEP2Setting up the TV Guide On ScreenTM system DISPLAYDISPLAYAUDIOAUDIO InfoInfo CREATECREATE CHAPTERCHAPTER ENTERENTER FUNCTIONS DIRECT NAVIGATOR TVGUIDE RETURNRETURNSUB MENUSUB MENU S SCHEDULESCHEDULETIME SLIPTIME SLIP PLAY/x1.3PAUSEPAUSESTOPSTOP SLOW/SEARCHSLOW/SEARCHSKIPSKIP DELETEDELETE VCR PlusVCR Plusi CHCH PAGEPAGE SELECT INPUTCANCEL 0 987 654 321 VOLUMEVOLUMECHCH I TVTV DRIVEDRIVE SELECTSELECT I DVD POWERPOWER TV/VIDEOTV/VIDEO POWERPOWER A B OPEN/CLOSEPOWER DRIVE SELECT k 1.31.3 REC 3,4,2,1 ENTER I DVD POWER POWER I/ l TV GUIDE PAGE W X RETURN Info Numbered buttons After plugging the unit into your household AC outlet and pressing [I DVD POWER] to turn the unit on for the first time, the unit starts language, TV aspect type and TV Guide On ScreenTM system setup. TV Guide On ScreenTM system This unit features the TV Guide On ScreenTM system that provides an 8-day grid of TV programs available in your area. Use the TV Guide On ScreenTM system to choose TV programs and simplify the recording of your favorite TV shows (. 28, 31–35). Best of all this service is free! .The first few days of listings usually appear within 24 hours after a successful Setup. It may take up to six days for the full eight days of program listings to appear. .In order to cool the circuits used when downloading the program listings, the cooling fan may sometimes operate when the unit is turned off. This is not a malfunction. IMPORTANT .The TV Guide On ScreenTM system must be set up whether it is then used or not. You cannot use the scheduled recording feature unless this setup is completed. .TV Guide On ScreenTM system is supported by selected DISH network and DirecTV receivers, using 480i mode. .DirecTV/DISH Network service is only available in the United States and is not available or supported in Canada. .If you are using a satellite service other than DirecTV, you cannot receive the program listings on this unit. Without this information, program-based recordings cannot be made. However, recordings can still be set manually. Preparation Turn on the television and select the appropriate video input to suit the connections to this unit. .When using the cable box or DirecTV receiver, check the following. –Make sure the IR Blaster is connected and positioned properly ...
Other models in this manual:DVD Players - DMR-EH55 (4.7 mb)