Votes - 2, Average rating: 4
(
)
)
|
manual abstract
AAAAAbuttons causes the disc to fast forward or reverse. Continuing to hold down the buttons causes it to search much faster. (Remote control) (Television screen) Notes • In some circumstances, this function is not available when the PBC function is activated. • The angle at which you hold the shuttle dial determines the manual search speed. Slow-motion playback on the remote control unit Press the SLOW button to play in slow-motion. By pressing the SLOW button consecutively, the playback speeds are cycled as shown below. SLOW 1/4 1/8 1/16 Normal Note • This function can only be used when playing a video CD. Using stereo headphones Connecting stereo headphones Connect stereo headphones to the PHONES jack at the lower-left of the front panel. The volume level is fixed and cannot be adjusted. PHONES Page 8 VARIOUS UNIQUE FUNCTIONS English Various functions can enhance your enjoyment Display of operations status Preparation This function is controlled by the remote control. Operation Press the ON SCREEN button. By pressing the ON SCREEN button, the following information may be easily and quickly displayed or removed from the television screen. Time, Echo effect, Key control, Program, Repeat, Random, Multiplexing, Vocal replace, Bookmark, etc. ON SCREEN (Remote control) (Television screen) Programming the track sequence you want Preparation It is not possible to enter programming mode during play. If playing, stop the player with the 7(STOP) button. Operation 1. Press the PROGRAM button to enter the programming mode. “PROGRAM” is displayed in the Display Window. PROGRAM 2. Specify the track by the number keys successively. You can program up to nine (9) tracks by repeating this procedure. 3. To play the programmed tracks press the 3 33333SELECT button. Notes • The track number playing, next track programmed, and number of remained programmed tracks are displayed from the right-top of the television screen. You may use the ON SCREEN button to delete this information. • Once the programmed track is played, it is deleted from the program. • You may continue to program even while the disc is playing. Canceling a programmed track Operation There are three (3) canceling functions (canceling the last programmed track, canceling the current track, canceling the next track to be played). • To cancel the last programmed track press the CANCEL button on the remote control and the last programmed track will be canceled. This can be done while a disc is playing. (Television screen) The number located lowest is the last track programmed. • To cancel the current track press 7 77777(STOP) button. • To cancel the next track, wait until the current track has finished and press the . ..... NEXT button and the next track will be canceled and the unit will go to the next programmed track. Note • To verify the tracks you programmed, stop the Player and see ON SCREEN information Clearing a program To delete all programmed tracks you have entered, press the 7 77777 (STOP) button and then the PROGRAM button. “PROG OFF” will be displayed on the television screen. STILL PROGRAM Note • The Player does not cancel the track program even if the 7(STOP) button is pressed. Pressing the 3SELECT (PLAY) button again causes the Player to resume playing from the next track. Page 9 VARIOUS UNIQUE FUNCTIONS Repeating tracks It is possible to repeat a whole disc or only a single track. Preparation This function is controlled by the remote control. Operation Press the REPEAT button. Channel REPEAT modes are cycled as shown below. REPEAT ®All tracks ®1 track (Remote control) (Display window) REPEAT ALL REPEAT1 REPEAT OFF (All tracks) (1 track) (Television screen) Notes • When playing a programmed sequence of tracks, only one track repeat is available. • Only REPEAT1 is available in KARAOKE mode. • The Repeat function is not available when the player is set to PBC ON. • Only REPEAT ALL is available when the player is in RANDOM mode. • You cannot repeat the segment between bookmarks. Randomly playing tracks Preparations • This function is controlled by the remote control. • The RANDOM button is effective only in NORMAL or PBC OFF mode. • This function plays tracks randomly from one disc. Operation 1. Stop the Player. 2. Press the RANDOM button and random playing will start. RANDOM (Remote control) 3. To cancel random playing, after stopping the Player (7 77777STOP button), press the RANDOM button again. STILL RANDOM (Remote control) Note • Random is not effective in PROGRAM or KARAOKE mode. Playing a multiplex sound CD This function is used for multiplex sound discs. Operation By pressing the MPX button consecutively, channel multiplexing modes are cycled as shown below. MPX NORMAL L-CH MONO R-CH MONO (left-channel/ right-channel) (Television screen) Viewing the VIDEO INTRO of a video CD Using this function, you can check the contents of a video CD, watching the first five seconds of each track on the video CD. Preparation When you play a video CD with th...
Other models in this manual:DVD Players - LET0088-001A (469.55 kb)