Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
Press --Turn left OSD display ,press it again to resume normal. Press --Turn right OSD display ,press it again to resume normal. Press the PLAY to continue slideshow transitions. Press the REW or FF to see the previous or next picture. -29 Kodak Picture CD Playback Advanced Features Zoom Function: Note: During the ZOOM function, slideshow transitions and image rotation are disabled. Q off: close zoom, pressPLAY Q1, Q2, Q3: zoom in; Q4, Q5: zoom out again to resume slideshow transition mode. This player provides both Zoom in/out and Zoom pan function. Press theZOOM consecutively, the picture will zoom in/out in turn as followings: Digest function Press the MENU/RETURN to enable the function. The television screen can display up to 12 pictures at a pro ratio. Note: the quality of the picture displaying on your screen is mostly subjected to your display equipment. Press Direction key to select any picture displayed on the screen, then press PLAY, the selected picture will zoom in and start slideshow transition. Time slot between slides presetting In playback mode, press the SEARCH to open the function menu. Press use the keys to adjust the time slot, there will display the time slot on the top-right corner of the menu. Press the SEARCH again to close this function. -30 Troubleshooting Other If you have any questions, please consult the troubleshooting guide below. If you cannot solve the problem, please contact our customer support department at 480-922-0896 or via e-mail at customersupport@sonicblue.com. "BAD DISC" DISPLAYED NO PICTURE OR SOUND Ensure the power button is on. Ensure the power outlet is operational. Ensure the power cord is not damaged. Ensure the power plug is connected firmly to the outlet. Ensure the disc is not warped, damaged or deformed. Ensure the disc is not badly stained or damaged. Ensure the disc format is compatible with the player. Please check whether you tried to play a software CD. If so, please restart the player. REMOTE NOT WORKINGPICTURE BUT NO SOUND Ensure the audio jacks are securely connected. Ensure the audio connector is not damaged. Ensure the volume is turned up in VOL/CH setup. Ensure you have set the player's AUDIO settings correctly. Ensure you have selected the correct AV input for your TV. Ensure the audio is not set to mute. SOUND BUT NO PICTURE Ensure the video jacks are securely connected. Ensure you have selected the correct AV input for your TV. Ensure the video connector is not damaged. Ensure you have set the player's VIDEO settings correctly. POOR PICTURE OR SOUND Ensure you have set the player's AUDIO settings correctly. Ensure the disc is not scratched or stained. Ensure the AV connector or the output terminal is not damaged. Ensure the remote batteries are working. Point the remote control directly at the player's IR sensor. Remove any obstacles between the remote and the IR sensor. UNIT NOT WORKING Turn off the power, and then turn it on again. "NO DISC" DISPLAYED Ensure you have put the disc on the tray. Ensure the disc is not upside down. Ensure the disc is not distorted, stained or scratched. -31 Specifications Other Power requirements: 110-240V, 50/60Hz Power consumption: 25W Video standard: NTSC Unit Weight: 6.4 Lbs (2.9kg) Unit Dimensions: 16.5in(W) x 12.0in(D) x 2.2in(H) (product),(418mm(W) x 305mm(D) x 55mm(H)) Video out Video out: 1.0V(p-p)/75 , sync, negative polarity, RCA pin Jack x 1 S-video output connector(separate Y C signal output connector): Y output: 1.0V(p-p)/ 75 , sync, negative polarity C output: 0.286 V(p-p)/75 4 pin mini DIN x 1 Audio out Analog out: 1.85V(rms)/10k , RCA pin Jack(L,R) x 1 Coaxial out: 0.5V(p-p)/75 , RCA pin Jack x 1 Frequency response: 20Hz to 20kHz S/N ratio: >90dB Total harmonic distortion: < 0.05% [Accessories] Audio/Video cable 1 Remote Control 1 Batteries(AAA) 2 Specifications are subject to change without notice. Weight and dimensions are approximate. -32- Remote Control Preparation Other Insert batteries Using the remote control DVD CD MP3 PLAYER DVP650Point the remote control at the remote sensor. 2. Insert batteries. 1. Open the cover. 3. Close the cover. Make sure to match the "+" and "-" of the batteries with the marks inside the battery compartment. 1 2 3 (The pictures below are for reference only.) o30o30 Notes: Improper use of batteries may cause battery leakage and corrosion. To operate the remote control correctly, follow the instructions below: Do not insert the batteries in the wrong direction. Do not charge, heat, open, or short-circuit the batteries. Do not throw batteries into a fire. Do not leave dead batteries in the Remote Control. Do not use different types of batteries together, or mix old and new batteries. If you do not use the remote control for a long period of time, remove the batteries to avoid possible damage from battery corrosion. If the remote control does not function correctly or the operating range becomes reduced, replace all batteries with new ones. If battery leakage occu...