Votes - 3, Average rating: 4
(
)
)
|
manual abstract
Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS • Make sure the power cord is plugged in. •Try another AC outlet. •Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. • Select the DVD or VCR mode before operating. • Antenna connection is not correct or antenna cable is discon- nected. • The video channel is not in the correct position or the TV is not set to the video channel 3 or 4. • Check the unit is connected correctly. • The video input selector of the TV is not set to VIDEO. Set to VIDEO (or equivalent). • Channel is set to the external mode. • Check the unit is connected correctly. • Check the input selector of the amplifier is set properly. • The unit is in the special playback mode. • Aim at the remote control at the remote sensor. • Operate within approx. 7 meters or reduce the light in the room. • Clear the path of the beam. • The batteries are weak. Replace the batteries. • Check the batteries are inserted correctly. • Check all Cable TV connections. • Station or Cable TV system problems, try another station. DVD/VCR does not operate. No picture. No sound. The remote control does not func- tion. No cable TV reception. DVD/VCR PAGE 15 – – 15 31, 47 16~19 22 16~21 – – 16~21 – 34, 48 15 18, 19 DVD • Select proper language in the SETUP MENU. • No disc is inserted. • The disc may be dirty. Clean up the disc. • The unit cannot play DVD-ROMs, etc. • Some discs may not do some of the functions. • Check the disc space, using the disc information. • Check the disc for protection. • Check if the video to be recorded is not “copy-guarded”. • Check that the number of recorded titles is 99 or less, using the disc information. • In a DVD-RW of Ver.1.0, recording in Video mode does not work. Check the disc type. • Check that the disc is finalized. • Some DVD players will not play even if the disc has been final- ized. • If the disc was recorded in VR mode, the other player must be RW compatible in order to play the disc. Display is not shown in your lan- guage. Playback doesn’t start. Cancel playback, search, slow- motion play, repeat play, or program play, etc. cannot be performed. Recording does not work. A recorded disc using this recorder cannot be played back in other players. 28 31 9 9 – 33 30 51 33, 50 10 30 11, 30 11, 30 Additional information 85 2H5-01 P82-87 85 7/25/05, 23:23 Additional information Problems and troubleshooting / Video head cleaning Additional information Problems and troubleshooting / Video head cleaning SYMPTOMS POSSIBLE SOLUTIONS PAGE TV recording does not work. Timer recording does not work. Noise bars on screen. • The erase prevention tab of the video cassette is broken off. • The unit is in the external input mode. • The time is not set correctly. • The recording start/end time is not set correctly. • TIMER REC has not been pressed ( is not lit). •Tracking adjustment beyond range of automatic tracking circuit. Try manual tracking adjustment. • Video heads are dirty. • The tape is worn or damaged. 46, 52 25 56 57 48 below – No picture, or screen is blurred or divided into two parts. No 4:3 (16:9) picture. No on-screen display. No surround sound. The unit or remote operation key is not functioning. Playback does not start when the title is selected. Audio soundtrack and/or subtitle language is not changed when you playback a DVD. No subtitles. Angle cannot be changed. “ ” appears on the screen. • The progressive scan mode is active though the unit is connected to a TV via the VIDEO OUT jack. • The setup does not match your TV. • Select DISPLAY to “ON”. • The setup does not match your stereo system. •Turn off the unit and unplug the AC power cord for several min- utes, then replug it. • Check the Parental setup. • Multilingual language is not recorded on the DVD disc. • Some discs have no subtitles. • Subtitles are cleared. Press SUBTITLE. • Multi-angles are not recorded on the DVD disc. • The function is prohibited with the unit or the disc. VCR OTHER 45 26 26 – 21 24 28 28, 39 – – Video head cleaning Video head clogging The video heads are meant by which the DVD/VCR reads the picture from the tape during playback. In the unlikely event that the heads become dirty enough to be clogged, no picture will be played back. This can easily be determined if, during playback of a known good tape, there is good sound, but no picture (picture is extremely snowy). If this is the case, DVD/VCR must checked by qualified service personnel. NOTES: • DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE REAR COVER. • Video heads may eventually wear out and should be replaced when they fail to produce clear pictures. • To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes. 86 2H5-01 P82-87 86 7/25/05, 23:23 Error/Warning message list Error/Warning message list Load another disc for recording. Sys...
Other models in this manual:DVD Players - D-VR4SU (12.48 mb)
DVD Players - D-VR4SU (12.48 mb)