Votes - 3, Average rating: 4
(
)
)
|
manual abstract
ATLANTIC : GMT–4hours EASTERN : GMT–5hours CENTRAL : GMT–6hours MOUNTAIN : GMT–7hours PACIFIC : GMT–8hours ALASKA : GMT–9hours HAWAII : GMT–10hours AUTO : AUTO SET (GMT: Greenwich Mean Time) .. Basic setup (VCR) Press VCR MENU. Press SET + or – to select “SYSTEM SETUP”, then press ENTER. 1 Press SET + or – to select “DAYLIGHT SAVING TIME”, then press ENTER. 2 Press SET + or – to select one of the options, then press ENTER. Press VCR MENU until the MENU screen is cleared. 3 Notes: • When shipped from factory, the DAYLIGHT SAVING TIME is set to “AUTO” position. • When the clock is not set, DAYLIGHT SAVING TIME setting is not available. • When there is no DAYLIGHT SAVING TIME in your area, al- When you want to set the DAYLIGHT SAVING TIME manually, on the first Sunday in April you set to “ON”, and on the last Sunday in October you set to “OFF”. ON: OFF: AUTO: for manual setting (forward one hour) for manual setting (back one hour) for automatic setting (read XDS in the signal) . . ways select “OFF” position in step 3. 25 2I30301A-En_p18-25 25 1/12/06, 17:43 Basic setup (VCR) Basic setup (VCR) Clock setting (Continued) VCR MENU If the AUTO CLOCK process did not set the date and time correctly, SET +/– you must set them manually for timer recording and DAYLIGHT SAVING TIME. ENTER CANCEL Manual clock setting Press VCR MENU. EXAMPLE: Setting the clock to “8:30 AM” March, 25 (SAT), 2006. 1 Press SET + or – to select “SYSTEM SETUP”, then press ENTER.2 Press SET + or – to select “CLOCK SET”, then press ENTER.3 Press SET + or – to set the month, then press ENTER.4 Set the day, year and time as in step 4. 5 . . .+/–/ENTER/CANCEL/MENU . MONTH DAY YEAR TIME 3 1 (WED) 2006 12 : 00AM .+/–/ENTER/CANCEL/MENU . MONTH DAY YEAR TIME 3 25 (SAT) 2006 8 : 30AM 8 : 30AM SAT After setting the clock, date and time starts functioning automatically. 6 To make corrections any time during the process Press CANCEL repeatedly until the item you want to change blinks, then press SET + or –. Note: After a power failure or disconnection of the power, the timer settings will be lost. In this case, reset the present time. 26 2I30301A-En_p26-31 26 1/12/06, 17:43 Tuner setting This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode. VCR DVD VCR MENU ENTER SET +/– TV/CABLE selection Setting channels automatically Basic setup (VCR)Repeat left step 1 and press SET + or – to select “AUTO CH MEMORY”. 1 Press ENTER. Auto tuning will begin. The channel dis- play will count up and when finished, the screen returns to normal. 2 .. Preparation: •Turn ON the TV and select to the corresponding video input. • Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.) Press VCR MENU. Press SET + or – to select1 “CH SETUP”, then press ENTER. 2 2 Press SET + or – to select “TV/CABLE”. 3 3 Press ENTER to select the TV or CABLE mode. The arrow indicates the selected mode. TV - VHF/UHF channels CABLE - Cable TV channels 4 4 Press VCR MENU until the menu screen is cleared. Note: You can’t select “CH SETUP” if you set the channel to “L1” or “L2”. 27 2I30301A-En_p26-31 27 1/12/06, 17:43 Basic setup (VCR) Basic setup (VCR) Tuner setting (Continued) VCR MENU ENTER SET +/– 0–9 To ADD/DELETE channels Noise elimination Repeat the step 1 on page 27 . Then press SET + or – to select the “ADD/DELETE” and press ENTER. 1 Press VCR MENU until the menu screen is cleared.3 To Add or Delete channels 2 1) Press Direct channel selection buttons (0–9) or SET +/– to select a channel number you want to add or delete. 2) To add channels Press ENTER until “ADD” appears on the screen. To delete channels Press ENTER until “DELETE” appears on the screen. The channel number will blink. 3) Repeat step 1 and 2 to add or delete other channel. When you don't want to receive a weak signal broadcast, a Blue back screen can be obtained by selecting the NO NOISE BACKGROUND to “ON”. When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to “ON”. Repeat the steps 1~2 on page 26 and press SET + or – to select “NO NOISE BACKGROUND”.1 Press ENTER to select “ON” or “OFF” position.2 .. Press VCR MENU until the menu screen is cleared.3 .. 28 2I30301A-En_p26-31 28 1/12/06, 17:43 Playback (VCR) Playback (VCR) Loading and unloading a cassette tape EJECT Use only video cassette tapes marked . Loading Aut...