Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
2 Select “TV” or “CABLE” to the appropriate position 26 .3 TV - VHF/UHF channels CABLE - Cable TV channels Press Direct channel selection (0–9) buttons or CH / to select the channel to be recorded. 4 Press REC. “ ” will appear on the screen for about 4 seconds and the REC/OTR indicator on the front panel will light. 5 Recording a TV program REC/OTR Notes: • If power is switched off during recording, the TV and the DVD sections go off and the VCR continues to record. Press the STOP button to halt the recording and turn off the VCR. • The unit channel cannot be changed during recording. • If you record the TV program after the DVD playback, you must set the unit to TV/VCR mode using the TV/VCR button. 38 TV/VCR 0–9 CH / STOP PAUSE/STILL REC SPEED Press STOP to stop recording. “ ” will appear on screen for about 4 seconds. Note: The pause function will be released after 5 minutes to prevent damage to the tape or the unit. The unit will change to the STOP mode. To stop recording temporarily Auto Rewind feature To stop recording Press PAUSE/STILL to avoid recording unwanted material. “ ” will appear on the screen and the REC/OTR indicator will blink on and off. Press PAUSE/STILL or REC to continue the recording. REC/OTR This VCR will automatically rewind the tape when the tape has ended (except during OTR and timer recording). It will also eject the tape. Note: If the erase prevention tab is removed, the tape will eject when REC button is pressed for recording. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or criminal liability. 5W50101A [E]p38-41 38 2/22/06, 6:42 PM DVD 0–9 One-touch Timer Recording (OTR) CH / The One-touch timer recording feature provides a simple and convenient way to make a timed recording. STOP REC SPEED One-touch timer recording (OTR) Load a cassette tape with the erase prevention tab intact. The unit will automatically turn on. Example: One-touch timer recording for 30 minutes. 1 Press SPEED to select the desired tape speed SP or SLP. The tape counter and SP or SLP will appear on the screen for about 4 seconds. 2 Set “TV” or “CABLE” option to the appropriate position 26 .3 CH 110 TV - VHF/UHF channels CABLE - Cable TV channels Press Direct channel selection (0–9) buttons or CH / to select the channel to be recorded. 4 5 5 Press REC to begin recording. Press the button again to stop recording after 30 minutes. Each additional press of REC will increase recording time as shown below, up to a maximum of 6 hours. “OTR” will appear on the screen. Press Recording time Press Recording time once NORMAL REC 6 times 3:00 twice 0:30 7 times 4:00 3 times 1:00 8 times 5:00 4 times 1:30 9 times 6:00 5 times 2:00 10 times NORMAL REC Recording (VCR) CH 110 OTR 0 : 30 Press STOP. “ ” will appear on screen for about 4 seconds. To cancel OTR Notes: • If you wish to watch the DVD playback during the recording or the OTR, press DVD to change to DVD mode and perform the DVD playback 44 . • The channel cannot be changed during recording. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or criminal liability. 39 5W50101A [E]p38-41 39 2/23/06, 1:51 PM Recording (VCR) Recording (VCR) TV/VCR Timer recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 ENTER programs within 1 month. / / / MENU TIMER REC Timer recording Preparation: Set the start time, end time, channel and tape • Press TV/VCR to select the TV/VCR mode. speed as in step 4. 5 • Load a cassette tape with the erase prevention tab Then press ENTER. intact. • Check the time and date are correct 21 . Example: Program a timer recording for 23rd day, channel 125 (Cable TV), 7:00 - 9:30 PM (Tape speed : SLP). 1 1 Press MENU, then press or to select Notes: option. TIMER REC SET AUTO REPEAT // / / MENU OFF • Press to move cursor backward for correction. • To record from external source set the channel to “L1” or “L2”. 2 2 Press or to select “TIMER REC SET”, then press . 3 3 Press or to select one of the program line, then press ENTER. 4 4 Press or to select the date, then press . 40 6 6 To set the timer for another program, repeat steps 3 to 5 to set another program. 7 7 Press TIMER REC.The TIMER REC indicator will light.The Timer is programed, when the programed time is reached, the recording is automatically started. TIMER REC To cancel timer recording, press the button again and TIMER REC indicator will go out. Notes: • The VCR section cannot be used while the TIMER REC indicator is lit. If you want to use the VCR operation, press TIMER REC to deactivate the ti...
Other models in this manual:Tape Players - TV/DVD/ Combo MW20F12 (3.82 mb)
Tape Players - TV/DVD/ Combo MW24F12 (3.82 mb)
Televisions - MW20F12 (3.82 mb)