Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
For DVDs Press the AUDIO button during playback, and then press the AUDIO button to select the desired audio language. .The audio language can be changed if multiple VCDCDDVD languages are recorded on the DVD being played. AUDIO 1.ENG DolbyD 5.1CH AUDIO 2.FRE DolbyD 5.1CH AUDIO 3.JPN DolbyD 5.1CH HELLO Bon jour For audio CDs, video CDs Press the AUDIO button during playback. .Pressing the AUDIO button cycles the sound mode through STEREO, L-CH and R-CH. AUDIO STEREO AUDIO L-CH Both right and left channels are active (stereo). Only the left channel is active. AUDIO R-CH Only the right channel is active. Notes .Pressing the Audio button may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). Operation varies between discs, so refer to the manual accompanying the disc. .Current audio language and sound mode will be displayed when you press the AUDIO button at first. .If a desired language is not shown after pressing the Audio button several times, the disc does not have an audio source in that language. .The audio language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected. .The screen display will disappear after about 5 seconds. .If you use DIGITAL AUDIO OUT jack, the sound mode of audio CDs and Video CDs can not be changed. –22– EN 1L01 CHANGING THE SUBTITLE LANGUAGE DVD The DVD player has a function which allows you to select the desired language for subtitles. 1 Press the SUBTITLE button during playback, and then press the SUBTITLE button to select the desired subtitle language. .The subtitle language can be changed if the subtitles are recorded in multiple languages on the DVD being played. .The subtitle language cannot be changed if the subtitles are recorded in a single language on the DVD being played. SUBTITLE 1.ENG/6 SUBTITLE 2.FRE/6 SUBTITLE OFF Subtitle 1 Subtitle 2 OFF .Pressing the SUBTITLE button cycles the subtitle language from SUBTITLE 1, SUBTITLE 2 and all the languages recorded. .Current subtitle mode will be displayed when you press the SUBTITLE button at first. .Press the SUBTITLE button, and then press the cursor (s / B) button to set it to on or off. HELLO Bon jour Notes .Some discs allow subtitle language setting on the disc menu. (Operation varies between discs, so refer to the manual accompanying the disc.) .If the desired language is not shown after pressing the SUBTITLE button several times, the disc does not have subtitles in that language. .The subtitle language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected. .It may take time to display the subtitles in the selected language. .The screen display will disappear after about 5 seconds. .When “SUBTITLE NOT AVAILABLE” appears onscreen, it means no subtitle is recorded on the scene. CHANGING THE CAMERA ANGLE (Multi-Angle Pictures) DVD The DVD player has a function which allows you to select the desired camera angle. 1 Press the ANGLE button during playback. .If the disc contains sequences recorded from different camera angles, the angle icon ( ) will appear at the top-right of the screen. You can change the camera angle when the icon appears on the screen. .The camera angle cannot be changed if the disc does not contain sequences recorded from different camera angles. 2 Press the ANGLE button while the angle number is shown on the screen. ANGLE 1 / 8 ANGLE 2 / 8 ANGLE 8 / 8 Angle 1 Angle 2 Angle 8 Notes .The screen display will disappear after about 5 seconds. .Current camera angle will be displayed when you press the ANGLE button at first. English –23– EN 1L01 CHANGING THE ON-SCREEN DISPLAY You can check the information about the disc by pressing the DISPLAY button on the remote control. For DVDs 1 Press the DISPLAY button during playback. VCDCDDVD CH(Chapter): Current chapter number / the number of total chapter. TIME: Elapsed time of the current chapter and remaining time of the TIME: Elapsed time of the current title on remaining time of the current title. current chapter. TT(Title): Current title number / the number of total titles. 2 Press the DISPLAY button again. .Use the number button to start from a desired chapter. 3 Press the DISPLAY button again. *1) It appears when the layered disc is playing back *2) It appears when Repeat play back is set. 4 Press the DISPLAY button or the RETURN button to exit the display. BIT RATE indicator will appear. BIT RATE shows the quantity of information which is recorded in DVD.C L0 Layer number (*1) L0: Layer 0 is playing back L1: Layer 1 is playing back Current Repeat setting (*2) C: Chapter repeat T: Title repeat A B: A-B repeat For audio CDs, video CDs 1 Press the DISPLAY button during playback. TR(Track): Current ...