Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
Ovens - HB56GS551E/45 (2.69 mb)
Ovens - HB56GS551E/45 (2.68 mb)
Ovens - HB56GS551E/45 (3.81 mb)
manual abstract
Press the 0 button repeatedly until the arrow is next to the required symbol, e.g. set cooking time function = Nx. 2. Set the desired value with the rotary selector. 3. Press the 0 button repeatedly until the I rotary symbol disappears from the clock display. A detailed description of how to adjust each individual function is provided below. Short audible signal If you cannot change or set a value, you will hear a short audible signal. Programming the timer The timer works independently of the oven.It can be used as a kitchen timer and programmed at any time. 1. Press the 0 button. The time function menu opens.The arrow Nis located to the left of the symbol Q. The control knob symbol I on the two points indicates that the time can be programmed using the control knob. 2. Set the time for the timer using the control knob. 3. Press the 0 button repeatedly until the control knob symbol I disappears from the time indicator. The time indicator shows the time elapsed from the set time. When the time has elapsed A signal sounds. The time on the timer has reached ‹:‹‹. Press the 0 button. The display goes out. Cancelling the timer time Press the 0 button to open the menu. Turn the timer time back to ‹:‹‹. Press the 0 button repeatedly until the I rotary symbol disappears from the clock display. Changing the timer time Open the menu with the 0 button and use the rotary selector to change the time. Press the 0 button repeatedly until the I rotary symbol disappears from the clock display. The menu is exited. The new time counts down. Setting the cooking time When a duration (cooking time) is programmed for a dish, the oven stops automatically when this time has elapsed. The oven will stop heating. Prerequisite: a heating type and temperature must be set. Example in the picture: top and bottom heat configuration %, 180 °C, cooking time 45 minutes 1. Press the 0 button twice. The arrow is located in front of the cooking time symbol Nx. The control knob symbol I on the two points indicates that the time can be programmed using the control knob. 2. To set the time using the control knob. .................................................... ............................ 3. Press the button 0 repeatedly until the control knob symbol I disappears from the time indicator. The configuration is applied. 4. If the oven has not been started, press the button †. The time indicator shows the time elapsed of the set time. The cooking time has elapsed A signal sounds. The oven stops heating. ‹:‹‹ is shown on the clock display. You can cancel the audible signal earlier by pressing the 0 button. To cancel a cooking time Using the button 0, adjust the cooking time Nx. To reset the cooking time to ‹:‹‹ using the control knob. Press the 0 button repeatedly until the control knob symbol I disappears from the time indicator. Adjusting the cooking time Using the 0 button, adjust the cooking time Nx. Change the cooking time using the control knob.Press the 0 button repeatedly until the control knob I symbol disappears from the time indicator. The time elapsed of the changed time is displayed. Calling up the clock, cooking time and end time You can call up all the functions with the 0 clock button. Delaying the end time The end time can be delayed by: ¦ for all types of heating ¦ many programs, ¦ The Clean function Example: the dish is put in the oven at 9:30 a.m. 45 minutes of cooking are required; so, it will be ready at 10:15 a.m. However, you wish cooking to end at 12:45 p.m. Change the end cooking time from 10:15 a.m. to 12:45 p.m. The oven will begin working at 12:00 p.m. and finish working at 12:45 p.m. This function is also compatible with cleaning. Cleaning can be programmed at night so the oven is available during the day. Please note that perishable food should not be left for too long in the oven. Delaying the end of the cooking time Prerequisite: a cooking time must have already been programmed. The oven must not be working. 1. Using the button 0, select the end cooking time Ny. The end time will be displayed. The dish will be ready at this time 2. Change the end time using the control knob. .................................................... ............................ 3. Press the button 0 repeatedly until the control knob symbol I disappears from the time indicator. 4. Press the † button. The oven is set to standby. The button † lights. The set time is displayed in the time indicator. When the oven starts working, the time elapsed is displayed. The cooking time has elapsed A signal sounds. The oven stops heating. ‹:‹‹ is shown on the clock display. You can stop the audible signal by pressing the 0 button. Correcting the end time This is only possible as long as the oven is in standby. Use the 0 button to select the Ny end time. Adjust the end time using the rotary selector. Press the 0 button repeatedly until the I rotary symbol disappears from the clock display. The new end time is applied. Setting the clock The oven must be ...