Votes - 0, Average rating: 0
(
)
)
|
manual abstract
If a caustic or abrasive substance comes into contact with the frontage, wash it off immediately with water. Stainless steel surfaces Always remove any flecks of limescale, grease, cornflour and egg white immediately. Corrosion can form under such flecks. Clean the appliance using water and a little detergent. Then dry the surface with a soft cloth. Appliances with glass fronts Clean the glass front with glass cleaner and a soft cloth. Do not use a glass scraper. Heating plate Clean the heating plate using warm water and a little detergent. Troubleshooting Malfunctions often have simple explanations. Please read the following instructions before calling the after- sales service: The ovenware or food remain cold. Check whether: ¦ the appliance is switched on ¦ there has been a power cut ¦ the drawer is closed completely The ovenware or food are not warmed sufficiently. This may indicate that: ¦ the ovenware or food were not warmed for a sufficient length of time ¦ the drawer was left open for a long time The "power on" indicator light flashes. Check whether the drawer is closed. The indicator light flashes rapidly when the warming Call the after- sales service. drawer is closed. The "power on" indicator light does not light up. The indicator light is faulty. Consult the after- sales service The fuse in the fuse box has blown. Disconnect the appliance at the mains and consult the after-sales service. Repairs must only be carried out by qualified specialists. Incorrect repairs may result in serious injury to the user. After-sales service Our after-sales service is there for you if your oven should need to be repaired. You will find the address and telephone number of your nearest after-sales service centre in the phone book. The after- sales service centres listed will also be happy to advise you of a service point in your local area. E number and When contacting the after- sales service, FD number always specify the product number ( E no. ) and the production number ( FD no. ) of your appliance. The rating plate bearing these numbers can be found by opening the warming drawer. Make a note of these numbers in the space below to save time in the event of your appliance malfunctioning. E no. FD no. After- sales service O Please find the contact data of all countries in the enclosed customer service list. To book an engineer visit and product advice GB 0844 8928989 Calls from a BT landline will be charged at up to 3 pence per minute. A call set- up fee of up to 6 pence may apply. IE 01450 2655 Trust the expertise of the manufacturer, and rest assured that the repair will be carried out by trained service technicians using original spare parts for your domestic appliance. Technical data Power supply: 220 -240 V 50/ 60 Hz Total connected load: 810 W VDE- inspected: yes CE mark: yes Environmental protection Unpack the appliance and dispose of the packaging in an environmentally-responsible manner. Environmental protection This appliance is labelled in acc...
Other models in this manual:Ovens - N21H40N0/06 (1.26 mb)
Ovens - N21H40N0/07 (1.26 mb)
Ovens - N21H40N0/10 (1.26 mb)
Ovens - N21H45N0/01 (1.26 mb)