Votes - 0, Average rating: 0 ( )

Manafacture: Bosch File size: 1.69 mb File name: Language of manual:

Cleaning the appliance exterior Caution! Surface damage due to incorrect cleaning: Do not use any ¦ harsh or abrasive cleaning agents ¦ cleaning agents that contain alcohol ¦ abrasive cleaning aids such as steel wool or scourers. Observe the specifications in the tables. Note: Highly recommended cleaning and care products can be purchased through our after- sales service. Observe the manufacturer's instructions. Appliance part/surface Cleaning agent/ aid Stainless steel surfaces Apply commercially available washing- up liquid with a soft, damp cloth or chamois; dry with a soft cloth. Use cleaners for matted stainless steel if very dirty. Painted surfaces Apply commercially available washing- up liquid with a soft, damp cloth or chamois; dry with a soft cloth. Control panel Apply commercially available washing-up liquid with a soft, damp cloth or chamois; dry with a soft cloth. Do not use glass cleaners or glass scrapers. Door panels Use a commercially available glass cleaner or washing- up liquid with a soft, damp cloth or chamois; dry with a soft cloth. The inner door panel on the appliance door has a coating which reduces the temperature and reflects the heat. The view through the appliance door is not impaired by this. When the appliance door is open, this coating can have the effect of a light- coloured film. This is part of the design and is not due to any quality defect. Cleaning the cooking compartment Notes ¦ Enamel is baked on at very high temperatures during Caution! manufacture. This can cause some slight colour variations. Risk of damaging the surface. Do not clean the appliance while This is normal and does not affect operation. still warm, even if using oven cleaners specially intended for ¦ The edges of thin trays cannot be completely enamelled. As this purpose. a result, these edges can be rough. Anti-corrosion protection is still guaranteed, however. Appliance part Cleaning agent/ aid Enamel surfaces (smooth surface) To facilitate cleaning, you can switch on the interior lighting and detach the appliance door if necessary. Apply commercially available washing- up liquid or a vinegar solution with a soft, damp cloth or chamois; dry with a soft cloth. Loosen baked- on food residues with a damp cloth and detergent. We recommend using oven cleaner if the oven is very dirty. When cleaning using an oven cleaner, check the manufacturer's instructions. Leave the cooking compartment open to dry after cleaning. Self- cleaning surfaces Please see the notes in section: Self-cleaning surfaces (rough surface) Door seal Hot soapy water Hook-in rack/ telescopic shelf Hot soapy water Accessories Soak in hot soapy water, clean with a brush and sponge or wash in the dishwasher. Keeping the appliance clean To avoid getting the cooking compartment dirty, ¦ clean the cooking compartment after each use, as dirt will bake on the next time it is heated up, and this can only be removed with difficulty ¦ always remove flecks of limescale, grease, starch and albumin (e. g. egg white) immediately ¦ use 3 CircoTherm ® whenever possible. This operating mode creates less dirt ¦ Use the universal pan to bake very moist cakes ¦ use suitable ovenware when roasting (e. g. roasting dish) or a roasting sheet (see section: Accessories) Self-cleaning surfaces The rear wall and ceiling of the cooking compartment are coated with self-cleaning enamel. This coating absorbs and disintegrates splashes from baking and roasting while the oven is in operation. Large splashes only disappear after the oven has been used several times. Colour variations on the self-cleaning surfaces have no effect on the self-cleaning function. Caution! Damage to surfaces on self-cleaning areas due to applying oven cleaner. Never clean the self-cleaning surfaces with oven cleaner. If oven cleaner accidentally gets onto self-cleaning surfaces, remove it immediately with a sponge and plenty of water. Caution! Damage to surfaces on self-cleaning areas due to the use of abrasive and acidic cleaning agents and aids. Do not use cleaning agents containing abrasive substances or acids. Do not use abrasive cleaning aids such as steel wool or scourers. Removing and fitting the appliance door You can remove the appliance door to clean it more thoroughly. : Risk of injury! The hinges of the appliance door may snap shut with great force. Always fully turn the two locks for fitting and removing the appliance door. : Risk of injury! If the appliance door has been removed without turning both locking levers to their limit stops, the hinge may snap shut. Do not reach into the hinge. Call the aftersales service. Removing the appliance door 1. Open the left and right-hand hinge lock ( Fig. A). To do this, push the hinge lock ( Fig. B) fully upwards on both sides with a screwdriver. $Hinge lock closed (Fig. C) Hinge lock open (Fig. D) % & 2. Open the appliance door a little (Fig. E). 20 3.Using a coin, fully turn both the left and right-hand locks on the inside of the appliance...

Download now

Please, enter two numbers from picture: