Votes - 5, Average rating: 3.6 ( )

Manafacture: Haier File size: 532.53 kb File name: da592915-717e-4ea4-950f-7386f3d174e5.pdf Language of manual:

With machine powered on, consecutively press Mode button until it enters Time 1 operation status with delay indication and symbol lighted. Press Set button to enter Time 1 hour setting status with Time 1 hour digits flashing. Press or button to get 10:00. While hour digits are flashing, you can press Set button to confirm and enter Time 1 minute setting. Adjust the value to 10:30 with or button. Then you may press Set button to confirm current settings or wait 6 s after which machine automatically confirms and quits. Time 2 time setting is similar to Time 1, i.e. press Mode button to enter Time 2 operation mode and set Time 2 time with Set button. Note: If large quantity hot water is used after delay mode is started and water heaters starts heating, resulting in water heater still hasn't reached temperature setting at delayed use time, machine will automatically extend heating for half an hour and stops. If actual temperature has reached setting value before delayed use time, and it decreases before reaching delayed use time, machine will calculate heating time again and determines if reheating is needed or not. Likewise, if water heater hasn't reached set temperature at delayed use time due to too low supply voltage, machine also automatically extends for half an hour and stops. 10. Operation Mode Selection After powering on, by consecutively pressing Mode button, system will shift between Real-time Heat / Warm (with Real-time indication), Medium Warm (with Medium Warm indication), Night Power (with Night Power indication), Time 1 (with Delay and indication), Time 2 (with Delay and indication) ,Time 1 + Time 2 (with Delay and , indication) and Intelligent (with Intelligent indication) modes. User can select any mode as current operation mode. Only after being selected as current operation mode, corresponding settings can be executed. Example: clock at 7:00, heating power of 2150 W, temperature setting of 75 (temperature setting and actual temperature flash alternatively), delayed useTime 1 being set at 10:00. If you want to use water at 10:00, machine will automatically heats water to set temperature at 10:00. Otherwise (e.g. in Night Power mode as shown in Fig. 13), it doesn't execute Time 1 function. You need to select Delay and symbol with Mode button, and then Time 1 function can be executed. 11. Powering Off After taking shower, you can lightly press On/Off button to power off the machine. Hints: With machine powered on, you can press Set button to set On/Off time for various modes, and adjust time with or button. In Real-time Heat mode, you can press Set button to adjust clock hour and minute values. In Delay mode, you can press Set button to set delayed use time. In Medium Warm and Intelligent mode, Set button is inactive. The machine has multiple safety means like current leakage protection, overtemperature protection, sensor short-circuit and open-circuit protection, which can realize full disconnection and display fault code. All fault protections are unrecoverable protection which needs local after-sales service. This water heater has power failure memory function. You needn't re-set heating power level, heating temperature ,clock and operation mode. Machine will directly go to previous working status after powering on again. A. B. C. Never do that Be sure to act as per instructions Description of the Symbols KEEPING SET HEATING SET HEATING KEEPING ACTUAL ACTUAL Rated voltage: 230V~ , 50Hz Dimensions: (see to Fig. 1) Power: 850 W /1300 W / 2150 W Weight: (see to Fig. 1) Rated pressure: 0.75 MPa Volume :(see to Fig. 1) Waterproof grade: IPX4 ( ) Tap water pressure: not less than 0.05 MPa Parameters Setting Environment . »O .° .. °O UI .· .A AE ®. A. O· . Do not install it outdoors. Do not install it as stand-alone. It shall be hung on firm and solid wall. Do not install it in places unable to drain water. Do not locate in freezing places. If ice forms, tank and pipes will break, causing scalding and leakage. The tubes and pipes fitted on the product are inseparable parts of the Safe Care technology, and shall not be removed by yourself. Otherwise, Haier shall not be liable for any damages or injuries caused due to resulted potential risks. If a drain hose is connected, it shall be connected to sewage drain, avoiding spilling the room. Operation Instructions Water hea...

Download now

Please, enter two numbers from picture: