Votes - 3, Average rating: 3.3
(
)
)
|
manual abstract
(.02 oz.) of grease on top of the inserted intermediate ball bearing (1) and on the intermediate pinion (22). • After inserting all gearing, place 13 gm. (.46 oz.) of grease at the armature pinion location in the gearcase (15) and fill to the top of the intermediate gear (19). Grease must contact at least 25% of the intermediate gear teeth. Before assembly, lightly coat all press fit areas with lightweight spindle oil. FIG. 4,20 5,6 NOTES: Support the output ball bearing inside the gearcase before pressing off the spindle gear. Needle bearings to be pressed flush to .010 under flush from the end which has the vendors identification. MILWAUKEE ELECTRIC TOOL CORPORATION 13135 W. LISBON RD., BROOKFIELD, WI 53005 Drwg. 3...
Other models in this manual:Power Screwdrivers and Drills - 54-06-2800 (95.66 kb)
Power Screwdrivers and Drills - 54-06-2800 (95.66 kb)
Power Screwdrivers and Drills - 54-06-2800 (95.66 kb)
Power Screwdrivers and Drills - 58-01-1805 (95.66 kb)