Votes - 5, Average rating: 4.6
(
)
)
|
manual abstract
IB_KH4055_0706_UK.qxd В 18.09.2006 14:11 Uh Powerfix” © ® WHEEL NUT WRENCH KH4G55 r Seite 1 -Q- IB_KH4055_0706_UK.qxd 18.09.2006 14:11 Uh Intended use The wheel nut wrench KH4055 is intended for loosening and tightening of wheel nuts / bolts during a tyre change. Technical data Length: 350 mm - 530 mm Wrench widths: 17 mm and 19 mm Using the wheel nut wrench -Q- • Park the vehicle on a level surface, put it in a low gear and set the hand break. • Also secure the vehicle against rolling with appropriate equipment. ^ Important: Follow the safety / operating instructions in the operating manual for your vehicle. • Loosen the wheel nuts / bolts of the wheel to be changed in an alternating cross pattern before lifting the vehicle with the jack. Seite 2 e 2 IB_KH4055_0706_UK.qxd 18.09.2006 14:11 Uh Seite 3 • Lift the vehicle until the wheel to be changed is no longer in contact with the floor. • Remove the wheel nuts / bolts in an alternating cross pattern and remove the wheel. • Put the replacement wheel in position and tightly screw in the wheel nuts / bolts. • Lower the vehicle and retighten the wheel nuts in an alternating cross pattern with the wheel nut wrench. ^ Important: After changing the wheel, check the air pressure in all tyres. The wheel nuts / bolts must be inspected again and retightened after approximately 50 km. Do not perform any work under the vehicle while it is lifted up with the jack. 3 IB_KH4055_0706_UK.qxd^18.09.2006 14:11 Uh Seite 4 UK Kompernaß GmbH Burgstrasse 21 D-44867 Bochum ID No.: KH4055_0706_V1...