Login:
Votes - 2, Average rating: 5 ( )

User manual Metra Electronics, model 98-8999

Manafacture: Metra Electronics
File size: 249.88 kb
File name: INST98-8999.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Locate one of the Left Brackets and mount it to the “L” side of the Pocket with (2) #6 x 1/4" Phillips Flat Head Screws. Next locate one of the Right Brackets and mount it to the “R” side of the Pocket with (2) #6 x 1/4" Phillips Flat Head Screws. (Figure A) 3 Mount the factory brackets to the shaded bosses (Fig. B2) with (4) #8 x 1/4" Phillips Pan Head Screws supplied and mount the entire assembly to the sub-dash. (Figure B) 1 98-8999 POCKET ASSEMBLY SUBARU POCKET 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Snap Pocket Trimplate SUB onto the front of the Pocket. Locate one of the Left Brackets and mount it to the “L” side of the Pocket with (2) #6 x 1/4" Phillips Flat Head Screws. Next locate one of the Right Brackets and mount it to the “R” side of the Pocket with (2) #6 x 1/4" Phillips Flat Head Screws. (Figure A) 3 Mount the factory brackets to the shaded bosses (Fig. B2) with (4) #8 x 1/4" Phillips Pan Head Screws supplied and mount the entire assembly to the sub-dash. (Figure B) 2 98-8999 POCKET ASSEMBLY VOLKSWAGEN POCKET 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Snap Pocket Trimplate VW (labeled TP-9008) onto the front of the Pocket. Locate the X-5599L Bracket and mount it to the “L” side of the Pocket with (3) #6 x 1/4" Phillips Flat Head Screws. Next locate the X-5599R Bracket and mount it to the “R” side of the Pocket with (3) #6 x 1/4" Phillips Flat Head Screws. (Figure A) 3 Pull out the plastic tray separating the dash cavity and remove the tray (“A”). Position the Pocket so each bracket is configured with (2) screws on the top and (1) screw on the bottom (“B”). Slide the pocket into the dash opening until the side clips engage. (Figure B) /А Ш I T knowledge is power Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto or call 800-354-6782 for more information and take steps toward a better tomorrow. a 1-800-221-0932 Ц REV. 08/12/08 © COPYRIGHT 2002-2008 METRA ELECTRONICS CORPORATION INST98-8999 3...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category