(Use a null cable if the serial device is a DTE.) □ In a web browser on your PC, type in the IP address and access the Web Configuration and Management Interface □ Login using the username 'root' and password 'dbps' □ In the Configuration, Network page configure your Wireless LAN, Security and other settings to work on the type of wireless network you will be connecting to. □ In the Configuration, Serial Ports page select the Port Profile you require for use with your application (E.g. RealPort for virtual COM port, TCP Server, UDP server, Serial Bridge, etc) □ Configure the serial port settings for the selected Port Profile (E.g. In TCP Sockets select client or server, TCP port numbers, etc.) Also configure baud rate, data bits, etc in Basic Serial Settings. □ Configure any required alarms and notification □ If RealPort profile was selected (virtual COM port) do the next step (Set up VCOM) □ Start the RealPort software wizard (located on the included CD) □ Select Add a New Device □ Select your ESR901WB from the list □ Select an unused COM port number □ Follow the wizard to set up a virtual COM port Documentation Model Number ESR901WB-2907qs PN6871-rev002 □ Apply power to the ESR901WB □ The Link LED (yellow) will blink while looking for the wireless network. When a connection is established with the network the Link LED will illuminate steadily. The ESR901WB will connect to the SSID Connect. If it cannot find an SSID of connect it will connect to the first unsecured network it finds. □ The ESR901WB will automatically try to obtain an IP address though DHCP, or generate one itself Get the IP Address □ Use the discovery software on your CD (finder.exe) to get the IP address for your ESR901WB □ If necessary, change the IP address using the discovery software International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support@bb-elec.com European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 support@bb-europe.com...