Votes - 1, Average rating: 3
(
)
)
|
Other manuals for this model:
Home Theater Systems - HT-AS5 (7.48 mb)
Home Theater Systems - HT-AS5 (11.16 mb)
Home Theater Systems - HT-AS5 (3.66 mb)
manual abstract
In this case, the system and the TV switch to the appropriate HDMI input. Note Depending on the TV, the start of the content may not be output. Tip You can enjoy the components that are connected to the HDMI jacks, even if you turn off the system. The POWER/ACTIVE STANDBY indicator lights up in amber. 43 GB “BRAVIA” Sync Features Enjoying the TV sound from the system’s speakers (System Audio Control) You can enjoy the TV sound from the system’s speakers by a simple operation. You can operate System Audio Control function using the TV menu. For details, refer to the operating instructions of the TV. When System Audio Control function is turned on, the system will turns on and switches to the appropriate input automatically. TV sound is output from the system’s speakers, and the volume of the TV is minimized simultaneously. You can use the System Audio Control function as follows. • If you turn on the system while the TV is turned on, the System Audio Control function will automatically be set to on and the TV sound will output from the system’s speakers. However, if you turn off the system, the sound will output from the TV speakers. • You can adjust the system’s volume when you adjust the TV volume. Notes • If System Audio Control does not function according to your TV setting, refer to the operating instructions of the TV. • When you connect a TV that does not have System Audio Control function, the System Audio Control function does not work. • If the TV is turned on before turning on the system, the TV sound will not be output for a moment. Using the Volume Limit function When the System Audio Control function is active, and the output method changes from the TV speaker to the system’s speakers automatically, loud sound may be output depending on the volume level of the system. You can prevent this by limiting the maximum volume level. 1 Press AMP MENU. “LEVEL” appears on the display. 2 Press V/V repeatedly until “SET HDMI” appears, then press © or b. 3 Press V/V repeatedly until “VOL LIMIT” appears, then press © or b. 4 Press V/V repeatedly to select the maximum volume level you want, then press ©. The maximum volume level changes as follows: LIMIT MAX y LIMIT 49 y LIMIT 48 y......y LIMIT 2 y LIMIT 1 y LIMIT MIN 5 Press AMP MENU. The AMP menu turns off. Notes • This function is available only when the Control for HDMI function is set to on. • This function is not available when the output method changes from the system’s speakers to the TV speaker. Tips • Sony recommends that you set the maximum volume level to a little lower than the volume you usually listen to. • Regardless of the maximum volume level you set, the VOLUME +/- on the subwoofer and the 2 +/- on the remote are operable. • If you do not want to limit the maximum volume level, select “LIMIT MAX”. 44GB Turning off the system with the TV (System Power Off) When you turn the TV off by using the POWER button on the TV’s remote, the system and the connected components turn off automatically. You can also use the system’s remote to turn off the TV. Notes • Set the TV Standby Synchro to “ON” before using the System Power Off function. For details, refer to the operating instructions of the TV. • Depending on the status, the connected components may not be turned off. For details, refer to the operating instructions of the connected components. time. The TV, system and the components connected via HDMI are turned off. 45fifl “BRAVIA” Sync Features Using the power saving function (HDMI Signal Pass Through) You can reduce the system’s power consumption when you connect a “BRAVIA” Sync-compatible TV to this system. During active standby mode, if the TV is turned off, the HDMI signal transmission will stop. Thus, power consumption will reduce. I II II 11 I ( MENU ) 1 Press AMP MENU. “LEVEL” appears on the display. 2 Press V/V repeatedly until “SET HDMI” appears, then press © or b. 3 Press V/V repeatedly until “PASS THRU” appears, then press © or b. 4 Press V/V repeatedly until the setting you want appears, then press ©. • THRU AUTO: When the TV is turned on while the system is in the standby mode, the system outputs HDMI signals from the system’s HDMI TV OUT jack. Sony recommends this setting if you use a TV that is compatible with “BRAVIA” Sync. This setting saves power in the standby mode compared with the “THRU ON” setting. • THRU ON: When the system is in the standby mode, the system continuously outputs HDMI signals from the system’s HDMI TV OUT jack. 5 Press AMP MENU. The AMP menu turns off. Notes • The power saving function may not work for some TVs compatible with the “BRAVIA” Sync. In this case, set “PASS THRU” to “THRU ON”. • Depending on your components, it may take time before image or sound is output. • This function is available only when the Control for HDMI function is set to on. 46GB Enjoying the TV sound via an HDMI connection (Audio Return Channel (ARC)) The s...
Other models in this manual:Home Theater Systems - HT-AF5 (3.69 mb)