Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Compatible USB devices yyMP3 Player : Flash type MP3 player. yyUSB Flash Drive : Devices that support USB1.1. yyThe USB function of this unit does not support some USB devices. USB device requirement yyThe file name is limited to 255 characters. yyUsing NTFS file system is not supported. (Only FAT(16/32) file system is supported.) yyDepending on the size and the number of the files, it may take several minutes to read the contents on the media. yyDevices which require additional program installation connected to a computer, are not supported. yyDo not extract the USB device while in operation. yyFor a large capacity USB, it may take longer than a few minutes to be searched. yyTo prevent data loss, back up all data. yyIf you use a USB extension cable or USB hub, the USB device is not recognized. yyThis unit is not supported when the total number of files is 1000 or more. yyExternal HDD, Card readers, Locked devices, or hard type USB devices are not supported. yyThe unit’s USB Port cannot be connected to PC. The unit can not be used as a storage device. 17 Operating 3 Operating 3 Operating Basic operations USB operation 1. Connect the USB device to the USB port. 2. Select the USB function by pressing INPUT. 3. Select a file you want to play by pressing C or V. To Do this Stop Press Z. Playback Press d/M. Pause During playback, press d/ M. Skip to the next/ previous file During playback, press C or V to go to the next file or to return to the beginning of the current file. Press C twice briefly to step back to the previous file. Search for a section within a file Press and hold C/V during playback and release it at the point you want to listen to. Play repeatedly or randomly Press REPEAT on the remote control repeatedly, the display will be changed in the following order, RPT 1 RPT D (DIRECTORY) RPT ALL RANDOM OFF. Select a file directly Press 0 to 9 numerical buttons on the remote control to go to the desired file directly. Other operations DOLBY DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [DRC ON] by using DOLBY DRC. AV Sync When receiving audio signals from TV, sound and images may not be matched. In the case, this function can adjust the delay time. 1. Press AV SYNC. 2. Use C/V to scroll up and down through the delay amount, which you can set at anything between 0 and 300ms. 18 Operating 3 Operating AUTO POWER On/Off Before operating this function, make sure that you have selected OPTICAL and turn on the AUTO POWER. This function automatically turns on/off the unit when you turn on/off the external device (TV, DVD Player, Blu-ray Disc Player, etc.) connected to this unit by the optical cable. This function turns on or off each time you press AUTO POWER. Display Operation AUTO POWER ON AUTO POWER function is turned on. AUTO POWER OFF AUTO POWER function is turned off. yyThis function is intentionally designed to turn off the unit after 15 minutes of inactivity. If you did not connect external devices with optical cable or there is no digital audio signal going to the unit, the unit will turn off after 15 minutes of inactivity if AUTO POWER function is turned on. yyDepending on the connected device by the optical cable, this function may not operate. yyIf you want to use AUTO POWER, SIMPLINK must be turned off. It takes for about 30 seconds to switch on or off SIMPLINK. yyIf SIMPLINK is set to ON, "AUTO POWER OFF" is just scrolled, even thouth you press AUTO POWER. yyOnce AUTO POWER is set, the unit will start as OPTICAL mode automatically next time, no matter what kind of function you selected before. ,,Note Notice for Auto Power Off This unit will be off itself to save electronic consumption in the case main unit is not connected to external device and is not used for 25 minutes. So does this unit after six hours since Main unit has been connected to other device using analog input. But the unit can turns on automatically based on the [AUTO POWER] function you've set. Turn off the sound temporarily Press MUTE@ to mute your unit. You can mute your unit, for example, to answer the telephone, “MUTE” is displayed in the display window. To cancel it, press MUTE@ again on the remote control or change the volume level. Displaying file and input source You can display various information of the input source by pressing INFO. USB : MP3/WMA containing file information OPTICAL/ARC/HDMI IN 1/2/3 : Audio format, Audio channel Sleep Timer Setting Press SLEEP repeatedly to select the desired time period options (in minutes): (Display window off (LCD OFF) -> Sleep timer value -> Display on) In display window you see “LCD OFF” or Sleep timer value and the display window turns off. To check the remaining time, press SLEEP. To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press SLEEP once again while “SLEEP 10” is displayed. yyYou can check the remaining time before the unit turns off. Press SLEEP the remaining time appear...