Votes - 0, Average rating: 0
(
)
)
|
manual abstract
VOL. -/+ 1/I (POWER) c iPod/ iPhone/ iPad/ USB Port d Display Window e Remote Sensor Precautions in using the touch buttonsyyUse the touch buttons with clean and dry hands. - In a humid environment, wipe out any moisture on the touch buttons before using. yyDo not press the touch buttons hard to make it work. - If you apply too much strength, it can damage the sensor of the touch buttons. yyTouch the button that you want to work in order to operate the function correctly. yyBe careful not to have any conductive material such as metallic object on the touch buttons. It can cause malfunctions. >>Caution Rear Panel a AC power cord b Speakers connectors c Cooling Fan d AUX (L/R) INPUT e OPTICAL IN f WIRELESS connector g Antenna Connector h USB Port (for connecting an USB keyboard or mouse) i HDMI IN 1/2 j HDMI OUT TO TV k LAN port 11 Getting Started 1 Getting Started Positioning the system The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position ( ABDDEEFFAAAAAGGCCABA Front left and Front top left speaker (L)/ Front right and Front top right speaker (R): Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible. Center speaker: Place the center speaker above or below the monitor or screen. Surround left and Surround top left speaker (L)/ Surround right and Surround top right speaker (R): Place these speakers behind your listening position, facing slightly inwards. Subwoofer: The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce the wall reflections. Unit yyBe careful to make sure children not to put their hands or any objects into the *speaker duct. *Speaker duct: A hole for plentiful bass sound on speaker cabinet (enclosure). yyPlace the center speaker at a safe distance from the child’s reach. Otherwise it may result in the speaker falling down and causing personal injury and/or property damage. yyThe speakers contain magnetic parts, so colour irregularity may occur on the CRT TV screen or PC monitor screen. Please use the speakers away from the TV screen or PC monitor screen. yyBefore using the subwoofer, remove the protective vinyl. yyThis product is specially designed to produce the effect of the 3D Sound. Other speakers may not operate normally when connected. >>Caution Speaker Connection Attaching the speakers to the player 1. Connect speaker cords to the player. Each speaker connector is color-coded. Use matching color connector for corresponding speakers. When connecting speaker cords to the player, insert the connector until it clicks. Connector color Speaker Position Green Center Center Orange Sub woofer Any front position Red Front right and Front top right Front right White Front left and Front top left Front left 2. Connect the speaker cord to the connector on the speaker. Attaching the rear speakers to the wireless receiver Connect the rear speakers to the wireless receiver with the speaker cords. Use matching color label for corresponding speakers. When connecting speaker cords to the wireless receiver, insert the connector until it clicks. Label color / Connector color Speaker Position Grey Rear right and Rear top right Rear right Blue Rear left and Rear top left Rear left Wireless speakers connection 1. Insert the Wireless TX till the marked line into the WIRELESS connector on the rear of the unit. Line 2. Connect the power cord of the wireless receiver to the outlet. 3. When you turn on the player, the wireless speakers connection will be completed automatically. --When the connection is completed, you can see the icon () on the display window. LED indicator of wireless receiver LED Color Operation Yellow (Blink) The connection is not completed. Yellow The connection is completed. Red The connection is in standby mode or failed. Off (No display) The AC power cord is unplugged. yyDo not insert other than the Wireless TX dedicated for this unit into the WIRELESS connector. This unit might be damaged or it may not be removed easily. yyIf there is a strong electromagnetic wave product nearby, interference may occur. Put the unit (wireless receiver and main unit) away from there. yyIt takes a few seconds (and may take longer) for the Wireless TX and the wireless receiver to communicate with each other. yyThe available range is 20 m for wireless connection in an open place. ,,Note Wireless speakers connection, manually You can set up wireless speakers connection manually, when your connection is not completed. Refer to the “Connect wireless speakers” on page 31. Connecting 15 2 Connecting Connecting to your TV If you ha...