Votes - , Average rating:
(
)
)
Manafacture: Philips
File size: 4.75 mb
File name:
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
Selecting digital sound effects Select a preset digital sound effect that matches your disc’s content or that optimises the sound of the musical style you are playing. . Press SOUND on the remote to select the available sound effect. In Dolby Digital, DTS, PRO LOGIC or PRO LOGIC II (MOVIE) surround mode, you can select : CONCERT, ACTION,DRAMA, or (Underline comment juhua.zhao 27.01.2005 8:35:29 SCI-) (Underline comment juhua.zhao 27.01.2005 8:35:30 SCI-) SCI- (Underline comment juhua.zhao 27.01.2005 8:35:30 FI) FI (default setting) In PRO LOGIC II (MUSIC) surround mode or in Tuner mode, you can select : CLASSIC, ROCK, JAZZ, or (Underline comment juhua.zhao 27.01.2005 8:38:47 DIGIT) DIGIT (Underline comment juhua.zhao 27.01.2005 8:37:29 AL) AL (default setting). Helpful Hint: –For flat sound output, select CONCERT or CLASSIC. Adjusting the Bass/Treble level The BASS (low tone) and TREBLE (high tone) features enable you to define the sound-processor settings. 1 Press BASS or TREBLE. 2 Within two seconds, use the VOLUME control to adjust the Bass or Treble level (-10dB ~ 10dB, default setting - 0dB). . If the volume control is not used within two seconds, it will resume its normal volume control function. . If headphone is connected, it will disable the bass/treble controls. 16 8239 300 38591 Volume Controls and Other Features Volume control . Adjust VOLUME control (or press VOL +/- on the remote) to increase or decrease the volume level. . "VOL MIN" is the minimum volume level and “VOL MAX” is the maximum volume level. For Philips TVs only . Press TV VOL +/-on the remote control to adjust the TV’s volume level. To listen through the headphones . Plug the headphones to the PHONE socket at the front of the AV receiver. . The speakers will be muted. . The current surround sound will change to stereo mode. To turn off the volume temporarily . Press MUTE on the remote. . Playback will continue without sound and "MUTE" icon appears. . To restore the volume, press MUTE again or increase the volume level. Night Mode - turning on/off When activated the night mode, the high volume outputs will be softened and low volume outputs will be brought upward to an audible level. It is useful for watching your favourite action movie without disturbing others at night. IMPORTANT! This feature is only available for movies with Dolby Digital mode. . Press NIGHT on the remote repeatedly to switch the Night mode on or off (default setting - OFF). Helpful Hint: – The night mode option is not available in DISC 6CH mode. Dimming system’s display screen . In any active mode, press DIM on the remote to select desired brightness : HIGH (default setting), MID or LOW. Setting the Sleep Timer The sleep timer enables the system to switch to standby mode automatically at a preset time. . Press SLEEP on the remote repeatedly until it reaches the desired preset turn-off time. . The selections are as follows (time in minutes): 15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™ OFF ™ 15 … . “SLEEP” icon will be shown on the display, except if "OFF" is selected. NIGHT SLEEP MUTE PRESET PROGRAM To check or change the setting . Press SLEEP once to show the remaining time before switching off. If you continue pressing the SLEEP button, the next Sleep Timer option will appear. To cancel the sleep timer . Press SLEEP repeatedly until "OFF" appears or press the STANDBY ON button. 17 8239 300 38591 English Tuner Operations English IMPORTANT! Make sure the FM and MW antennas are connected. Tuning to radio stations 1 Press TUNER on the remote (or press SOURCE control on front panel) to select “FM” or “MW”. 2 Press and hold S / T on the remote until the frequency indication starts to change, then release. . "FM SEARCH" appears. . The next radio station will be tuned automatically. . lights up for FM stereo reception. 3 To tune a weak station, press S / T briefly and repeatedly until an optimal reception is found. RDS Function RDS (Radio Data System) is a broadcasting service that allows FM radio stations to send additional information along with the FM radio.This additional information includes: . Frequency . Station Name 1 In FM mode, if the tuned radio station is transmitting RDS data, the RDS station name will be shown on the display panel. 2 Press S / T button to change the station frequency to get the new RDS station. 3 If the tuned station is not transmitting an RDS signal or is not a RDS station, the display panel will only show the station frequency. Helpful Hint: - RDS function is only available in areas that support RDS system. 18 Presetting radio stations You can store up to 40 preset radio stations in the memory. Automatic presetting You can store all available radio stations automatically. 1 In tuner mode, press and hold PROG for five seconds to enter system setup. 2 Press S / T to select “AUTO PROG”. AUTO PROG 3 Press PROG to confirm. . “CONFIRM” appears. 4 Press PROG again to start automatic presetting. . “SEARCH” appears. . All the available radio stations with ...