Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
b Pull the battery pack until the hooks click. b QJ Hooks I b Q The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of it’s useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste/officials for details in your area for recycling options or proper disposal. 14 Power Connections (continued) ■ Charging the battery pack 1. Attach the battery pack to the player. 2. Connect the AC power adapter to the player and the plug into an AC outlet. Player „ „ , I Battery Pack Connect the AC Charge indicator adapter cord 3. During recharging, charge indicator is red. If recharging is complete, charge indicator changes to green color. CAUTION Take the following precautions to avoid liquid leakage, overheating, etc. • Do not use any unauthorized parts. • Use the authorized AC adapter when recharging battery. • Do not expose to high temperature above 60°C (140°F). • Do not attempt to dismantle or modify the unit. • Excessive impact may cause the unit to malfunction. • Do not incinerate. • Do not disassemble; dispose of properly. • Do not short-circuit. NOTE Charging a battery only happens when the power is off. The battery will not be charged when it is naturally or purposely discharged. Because the unit cannot perceive battery voltage, even if you attached the battery. When you are in this situation, power on the unit and then power off again. Then battery charge will proceed. ■ Recharging and play times Recharging Play time without Playback LCD On LCD Off Approx. Approx. Approx. 3 hour 3.5 hours* 4 hours * When Brightness control is set to initial mode. - using the headphones and volume center. ■ Press “Display” to display the battery status on the screen. Full Low Recharge If using the AC adapter, battery display does not appear. If the battery capacity is not enough, “Check Battery Status” or “ <—i ” is displayed on the screen and then the power is automatically turned off after a few minute. ■ If play time dramatically reduces after recharging The battery pack has reached the end of its service life (it can be recharged about 300 times). ■ If the unit is not used for a long time • Detach the battery pack. (Even if the unit is off, it still uses some power. This can lead to over discharging of the battery and malfunction.) • Recharge the battery pack when you are ready to use it again. Rotating the LCD Playing a Disc Select a MODE 1. Prepare the power supply. 2. Open the outer cover and press POWER button. 3. Press OPEN to open the disc lid and insert a disc with the side you want to play label up. Close the disc lid by hand. • If the disc is placed in upside down (and it is a single-sided disc), “CHECK DISC” or “DISC ERROR” appears on the screen. • After playing back all of the chapters in the title, the unit automatically stops and returns to the menu screen. 4. Press PLAY(N) to playback. 5. Adjust the volume. NOTES • Place a disc with the playback side down on the spindle, and push gently on the center of the disc so it goes into position. • If you are not using the LCD on this unit, select OFF to conserve power. • The LCD is turned off if you close the unit. • The picture shown on the LCD depends on the display mode and the size recorded on the disc. ■ Changing the size of the picture Use the LCD MODE button to change the picture mode. The mode is shown on the unit’s display as follows. Selects a mode among DISC, AV IN or USB. 1. Press MODE button on the unit. The mode selection menu appears on the screen. 2. Use b / ► to select the mode then press ENTER. • DISC: The disc menu or playback picture for the disc appears on the screen . • AV IN: A picture from external device appears on the screen. • USB: A file or folder list in USB Flash Drive appears on the screen. NORMAL ^ 4:3 mode ^ OFF 4_I NOTE May appear to differ according to kind of disc. - Introduction On-Screen Display Displaying Disc Information on-screen You can display various information about the disc loaded on-screen. 1. Press DISPLAY to show various playback information. The items displayed differ depending on the disc type or playing status. 2. You can select an item by pressing ▲ / T and change or select the setting by pressing b / ►. • Title (Track) - Current title (or track), number/total number of titles (or tracks). • Chapter - Current chapter number/total number of chapters. • Time - Elapsed playing time. • Audio - Selected audio language or channel. • Subtitle - Selected subtitle. • Angle - Selected angle/total number of angles. NOTE If no button is pressed for a few seconds, the on-screen display disappears. [IT < 1/32 ►] Pi 1/61 r# 0:00:25 r. 1 ENG □□□ 3/2 CH iffl OFF R 1/1 Initial Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You ...