Votes - 4, Average rating: 3.8
(
)
)
|
manual abstract
• Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers. Center Speaker C • It is best to install it at the same height as speakers. • You can also install it directly over or TV. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example: For 32" TVs 2~2.4m (6~8feet) For 55" TVs 3.5~4m (11~13feet) CONNECTIONS SUBWOOFER REAR R FRONT CENTER REAR FRONT L IMPEDANCE FRONT / CENTER / REAR : 4.SUBWOOFER : 4.LS RS L R C SW Rear Speaker (R) Front Speaker (R) Subwoofer Center Speaker Rear Speaker (L) Front Speaker (L) Blue Gray Purple White Red Green Rear Speakers 1 Press down the terminal 2 Insert the wire into the 3 Connect the connecting jacks to RSLS Back of the Speakers Back of the Main Unit • Place these speakers behind your listening position. tab on the back of the terminal and release the the back of the DVD player. • If there isn't enough room, place these speakers to face each other. speaker. • Place them about 60 to 90cm (2 to 3feet) above your ear, facing terminal tab. • Make sure the colors of the speaker terminalsslightly downward. • Insert the black wire into the black match the colors of the connecting jacks. (–) terminal and the gray wire into • Make sure the polarities (+ and –) are correctly. the gray (+) terminal. * Unlike the front and center speakers, the rear speakers to handle mainly sound effects and sound will not come from • Make sure the polarities (+ and –) them all the time. are correct. Black Gray Subwoofer SW • The position of the subwoofer Place it anywhere you like. • Usually, it is placed by a corner Connecting the Video Out to TV 13 METHOD 1 Composite Video ............... Good Quality Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your television. METHOD 3 Component (Progressive Scan) Video ............... Best Quality If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on your television. SUBWOOFER REAR R FRONT R CENTER REAR L FRONT L IMPEDANCE FRONT / CENTER / REAR : 4. SUBWOOFER : 4. VIDEO IN COMPONENT IN TV S-Video • When the Progressive scan mode is selected, the VIDEO and SCART outputs do not feed any signal. See page 14 to select Progressive Scan. Note Make sure that turn off and disconnect the plug from outlet before moving or installing the product. In connecting to video, select one of following three methods that suits for TV and connect it. METHOD 1 METHOD 2 METHOD 3 METHOD 2 S-Video ............... Better Quality If you television is equipped with an S-Video input, connect an S-Video cable (not supplied) from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on your television. CONNECTIONS 14 P.SCAN(Progressive Scan) Function Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines. Press STOP button. • When disc is played back, press the STOP button twice so that “STOP”, appears on the display. Press and hold P.SCAN button on the remote control for over 5 seconds. • Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan" repetitively. • When you select P.SCAN, "P.SCAN" will appear on the display In interlaced-scan video, a frame consists of two interlaced fields (odd and even), where each field contains every other horizontal line in the frame. The odd field of alternating lines is displayed first, and then the even field is displayed to fill in the alternating gaps left by the odd field to form a single frame. One frame, displayed every 1/30th of a second, contains two interfaced fields, thus a total of 60 fields are displayed every 1/60th of a second. The interlaced scanning method is intended for capturing a still object. Interlaced Scan (1 FRAME = 2 FIELDS) The progressive scanning method scans one full frame of video consecutively down the screen, line by line. An entire image is drawn at one time, as opposed to the interlaced scanning process by which a video image is drawn in a series of passes. The progressive scanning method is desirable for dealing with moving objects. Progressive Scan (FULL FRAME) What is Progressive (or Non-Interlaced) Scanning? • This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive scan TVs.) • Depending on the brand and model of your TV, this function may not work. Note Press and hold NTSC/PAL but...
Other models in this manual:Home Theater Systems - HT-DS400 (8.32 mb)
Home Theater Systems - HT-DS403 (8.32 mb)
Home Theater Systems - HTDS400 (8.32 mb)