Votes - 3, Average rating: 4.7
(
)
)
|
Other manuals for this model:
manual abstract
DIGITAL OUT Optical Cable (not included) 1 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component. 2 Press AUX on the remote control to select ‘DIGITAL IN’. • Each time the button is pressed, the selection changes as follows: DIGITAL IN . AUX 1 . AUX 2. • You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD . DIGITAL IN . AUX1 . AUX2 . FM . MW . LW. 15 L R Example: Analog signal components such as a VCR, Camcorder, and TV. Connecting an External Analog Component Audio Cable If the external analog componenthas only one AudioOut, connect either left or right. CONNECTIONS L R Example: Analog signal components such as a VCR, Camcorder, and TV. Connecting an External Analog Component Audio Cable If the external analog componenthas only one AudioOut, connect either left or right. CONNECTIONS 1 Connect Audio In on the DVD player to Audio Out on the external analog component. • Be sure to match connector colors. 2 Press AUX on the remote control to select AUX 1 or AUX 2. • Each time the button is pressed, the selection changes as follows: DIGITAL IN . AUX 1 . AUX 2. • You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD . DIGITAL IN . AUX1 . AUX2 . FM . MW . LW. 16 Before Using Your DVD Player Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using. 4 Press TV/VIDEO button to select VIDEO mode. 2 2 Press the MODE 1 Plug the power button so that the cord into the AC TV indicator on power supply. the remote control flashes. DVD RECEIVER TV 3 Press the POWER button to turn on the TV. 5 5 Press the MODE button so that the DVD RECEIVER indicator on the remote control flashes. TV DVD RECEIVER 6 Press DVD button to select DVD/CD mode. Selecting the Video Format Turn off the main unit and then press NTSC/PAL. • By default, the video format is set to "PAL". • Each time the button is pressed, the video format switches between "NTSC" and "PAL". • Each country has a different video format standard. • For normal playback, the video format of the disc must be the same as the video format of your TV. To Operate the TV and DVD Player with a Single Remote Control Press MODE button. • Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash alternately. • You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing. • Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons. • By default, the remote control is set to work with Samsung TVs. See page 61 for more information on the operation of the remote control. 17 Disc Playback 1 1 Press OPEN/CLOSE button to open the disc tray. 2 2 Load a discs. • Place a disc gently into the tray with the disc’s 3 Press OPEN/CLOSE button to close the disc tray. DVD VCD CD • Playback starts automatically. MP3 JPEG • Playback starts automatically. • If the TV is on, a list of MP3s on the CD will appear on the TV screen. Something like you Back for good Love of my life More than words I need you My love Uptown girl DVD RECEIVER SMART NAVI Note • Depending on the content of the disc, the initial screen may appear different. • Depending on the recording mode, some MP3-CDs cannot be played. • Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc. To stop playback, press STOP during playback. • If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory. If PLAY/PAUSE To temporarily pause playback, ( ) button or ENTER button is pressed, playback press PLAY/PAUSE during playback. resumes from the stop position. (This function works only with DVDs.) • To resume playback, press PLAY/PAUSE • If pressed twice, “STOP” is displayed, and if button again. PLAY/PAUSE ( ) button is pressed, playback starts from the beginning. CONNECTIONS 18 Displaying Disc Information You can view playback information on the disc on the TV screen. Displaying Disc Information You can view playback information on the disc on the TV screen. Press INFO button. • Each time the button is pressed, the display changes as follows: DVD VCD CD Something like you Back for good Love of my life More than words DVD RECEIVER SMART NAVI MP3 JPEG Display disappears Note • Depending on the disc, the disc information display may appear different. • Depending on the disc, you can also select DTS, DOLBY DIGITAL, or PRO LOGIC. Display disappears Display disappears • What is a Title? A movie contained in a DVD disc. • What is a Chapter? Each title on a DVD disc is divided into several smaller sections called "chapters". appears on the TV screen! • If this symbol appears on the TV screen while buttons are being operated, that operation is not possible with the disc currently being played. • What is a Track (Fi...
Other models in this manual:Home Theater Systems - HT-DB1750 (12.45 mb)
Home Theater Systems - HT-DB750 (12.45 mb)