Votes - 5, Average rating: 4 ( )

Manafacture: Samsung File size: 9.13 mb File name: Language of manual:

Other manuals for this model:

Home Theater Systems - HT-910 (8.92 mb)

press ENTER button. ENTER button. • The test tone will be sent to L . C . R . RS . LS . SW in that order. If the ENTER button is pressed again at this time, the test tone will stop. SETUP Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. L: Front Speaker (L) C: Center Speaker SW: Subwoofer R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R) 54To end the test tone, press TEST TONE button again. Press TEST TONE button. • Test tone will be produced as follows: When playing a DVD or CD, this will work only in Stop mode. • Use this function to check that each speaker is correctly connected and that there is no problem. Alternate method: press the TEST TONE button on the remote. Multi-Channel Pro Logic Mode Start 41P~76P(910HD)-GB 2004.7.22 8:47 AM Page 54 Setting the Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. 2 2 Press Cursor button 1 1 In Stop mode, to move to ‘Audio’ and press MENU then press ENTER button. button. 55 Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center Speaker and Surround Speakers. • With (Dolby Pro Logic II), the delay time may be different for each mode. • With AC-3 and DTS, the delay time can be set between 00 and 15mSEC. Note 41P~76P(910HD)-GB 2004.7.22 8:47 AM Page 55 4 ,Press Cursor , Press Cursor button 3 3 Press Cursor , , buttons to move to move to ‘DELAY to set the Delay to the desired TIME’ and then press 5 time. speaker and then ENTER button. press ENTER button. • You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC. 56 Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER Ideal CENTER SPEAKER placement It is desirable to place all speakers within this circle. Ideal SURROUND SPEAKER placement SETUP 0 ms 3 ms 6 ms 9 ms 12 ms 15 ms • Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. • Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc Delay Time Delay Time 0 ms 1 ms 2 ms 3 ms 4 ms 5 ms Distance between Df and Ds 0.00 m 1.02 m 2.04 m 3.06 m 4.08 m 5.10 m0.00 m 0.34 m 0.68 m 1.02 m 1.36 m 1.70 m 57 Setting the Audio Quality You can adjust the balance and level for each speaker. 1 2 3 4 In Stop mode, press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. Press Cursor button to move to ‘SOUND EDIT’ and then press ENTER button. Method 1 When adjusting the audio quality using the setup screen Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. Press Cursor , buttons to select and adjust the desired item. Press the , buttons to adjust the settings. 41P~76P(910HD)-GB 2004.7.22 8:47 AM Page 56 • The adjustments will appear on the main unit, not on your TV screen. Adjusting Front/Rear Speaker Balance • You can select between 00 and –06 and OFF. • The volume decreases as you move closer to –6. Adjusting Center/Rear/Subwoofer Speaker Level • The volume level can be adjusted in steps from +6dB to –6dB. • The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. Method 2 When manually adjusting with the SOUND EDIT button 1 2 Adjusting Front Speaker Balance Adjusting Rear Speaker Balance Press SOUND EDIT button and then press Cursor , . 3 Adjusting Center Speaker Level 4 5 Adjusting Rear Speaker Level Adjusting Subwoofer Speaker Level 58 Press SOUND EDIT button and then press Cursor , . Press SOUND EDIT button and then press Cursor , . Press SOUND EDIT button and then press Cursor , . Press SOUND EDIT button and then press Cursor , . Note SETUP TITLE CHAP PRGM RDS RT ST TUNED kHz MHz TITLE CHAP PRGM RDS RT ST TUNED kHz MHz TITLE CHAP PRGM RDS RT ST TUNED kHz MHz TITLE CHAP PRGM RDS RT ST TUNED kHz MHz TITLE CHAP PRGM RDS RT ST TUNED kHz MHz 41P~76P(910HD)-GB 2004.7.22 8:47 AM Page 57 41P~76P(910HD)-GB 2004.7.22 8:47 AM Page 58 Setting the DRC (Dynamic Range Compression) You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. 2 2 1 1 Press Cursor button to In Stop mode, press move to ‘Audio’ and then MENU button. press ENTER button. 3 3 Press Cursor button to Press Cursor , to move to ‘DRC’ and then 4 adjust the ‘DRC’. press ENTER button. • Pressing the Cursor button increases the compression, ...

Download now

Please, enter two numbers from picture: