Votes - 6, Average rating: 4.3
(
)
)
|
Photos and specs Sony DAV-SC5 |
manual abstract
(Cannot be set to less than 1 metre.) S.D. (surround speakers distance) S.H. LOW (low) (surround speakers HIGH (high) height) T.TONE ON (on) (test tone) OFF (off) Up to 4.6 metres closer to the listening position than the front speakers. (Cannot be set to less than 1 metre.) • LEVEL S.P. BEHIND (behind) (surround speakers SIDE (side) position) The amp menu is cancelled when you do not operate the remote for several seconds. F.______I_______ (front speakers balance) C.LEV –6dB to +6 dB (centre speaker level) S.L.LEV –6dB to +6 dB (surround left speaker level) S.R.LEV –6dB to +6 dB (surround right speaker level) S.W.LEV –6dB to +6 dB (subwoofer level) D.COMP ON (on) (dynamic OFF (off) compression) 68GB Additional Information Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The power is not turned on. • Check that the mains lead is connected securely. If the STANDBY indicator flashes. Immediately unplug the power cord and check the following items. • Are the + and – speaker cords short-circuited? • Are you using only the specified speakers? • Is anything blocking the ventilation holes on the top of the system? After checking the above items and fixing any problems, connect the power cord again and turn on the system. If the indicator still flashes, or if the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer. Picture There is no picture. • The SCART (EURO AV) cord is not connected securely. • The SCART (EURO AV) cord is damaged. • The system is not connected to the correct t EURO AV INPUT jack (page 18). • The video input on the TV is not set so that you can view pictures from the system. • Check the output method on your system (page 64). Picture noise appears. • The disc is dirty or flawed. • If the picture output from your system goes through your VCR to get to your TV, the copy- protection signal applied to some DVD programs could affect picture quality. Even though you set the aspect ratio in “TV TYPE” of “SCREEN SETUP,” the picture does not fill the screen. • The aspect ratio on the disc is fixed. Sound There is no sound. • The speaker cord is not connected securely. • Press MUTING on the remote if “MUTING ON” is displayed in the front panel display. • The system is in pause mode or in Slow-motion Play mode. Press H to return to normal play mode. • Fast forward or fast reverse is performed. Press H to return to normal play mode. • Check the speaker settings (pages 21, 65). The left and right sounds are unbalanced or reversed. • Check that the speakers and components are connected correctly and securely. • Adjust the balance parameter in the BALANCE menu (page 67). There is no sound from the subwoofer. • Check the speaker connections and settings (pages 21, 65). • Set the sound field to “AUTO FORMAT DIRECT AUTO” (page 43). Severe hum or noise is heard. • Check that the speakers and components are connected securely. • Check that the connecting cords are away from a transformer or motor, and at least 3 metres away from your TV set or a fluorescent light. • Move your TV away from the audio components. • The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. • Clean the disc. The sound loses stereo effect when you play a VIDEO CD, a CD, or an MP3. • Set “AUDIO” to “STEREO” in the Control Menu display (page 41). • Make sure the system is connected appropriately. Additional Information continued 69GB The surround effect is difficult to hear when you are playing a Dolby Digital, DTS, or MPEG audio sound track. • Make sure the sound field function is on (page 43). • Check the speaker connections and settings (pages 21, 65). • Depending on the DVD, the output signal may not be the entire 5.1 channel. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or MPEG audio format. The sound comes from the centre speaker only. • Depending on the disc, the sound may come from the centre speaker only. No sound is heard from the centre speaker. • Check the speaker connections and settings. • Make sure the sound field function is on (page 43). No sound or only a very low-level sound is heard from the surround speakers. • Check the speaker connections and settings. • Make sure the sound field function is on (page 43). • Select a sound field containing the word “C. ST. EX” (page 44). • Depending on the source, the effect of the surround speakers may be less noticeable. Operation Radio stations cannot be tuned in. • Check that the aerials are connected securely. Adjust the aerials or connect an external aerial if necessary. • The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning. • No stations have been preset or the preset stations have been cleared (when tuning by...