Votes - 4, Average rating: 3.8
(
)
)
|
Other manuals for this model:
Home Theater Systems - DAV-DZ360WA (1.07 mb)
Home Theater Systems - DAV-DZ360WA (4.41 mb)
manual abstract
x [MULTI-DISC RESUME] (DVD VIDEO/ VIDEO CD only) You can set the [MULTI-DISC RESUME] function to on/off. [ON]: The system stores the resume points in memory for up to 10 discs. [OFF]: The system does not store the resume points in memory. Playback restarts at the resume point only for the current disc in the unit. x [RESET] You can return the [SET UP] settings other than [PARENTAL CONTROL] to the default settings. For details, see “Returning the [SETUP] settings to the default” (page 83). Settings for the speakers [SPEAKER SETUP] To obtain the best possible surround sound, set connection of the speakers and their distance from your listening position. Then use the test tone to adjust the level and the balance of the speakers to the same level. Note • You cannot operate [SPEAKER SETUP] when you connect headphones to the unit or surround amplifier. Disc 51GB SPEAKER SETUP DISTANCE(FRONT): CONNECTION: DISTANCE(SURROUND): LEVEL(FRONT): LEVEL(SURROUND): TEST TONEFRONT: CENTER: SURROUND: SUBWOOFER: YES YES YES YES SPEAKER SETUP DISTANCE(FRONT): CONNECTION: DISTANCE(SURROUND): LEVEL(FRONT): LEVEL(SURROUND): TEST TONEFRONT: CENTER: SURROUND: SUBWOOFER: YES YES YES YES x [CONNECTION] If you do not connect center or surround speakers, set the parameters for [CENTER] and [SURROUND]. Since the front speaker and subwoofer setting is fixed, you cannot change them. [FRONT] [YES] [CENTER] [YES]: Normally select this. [NONE]: Select this if no center speaker is used. [SURROUND] [YES]: Normally select this. [NONE]: Select this if no surround speaker is used. [SUBWOOFER] [YES] Note • When you change the [CONNECTION] setting, the [STANDARD] of [SPEAKER FORMATION] setting remains the same, but the other settings of [SPEAKER FORMATION] return to [STANDARD]. x [DISTANCE (FRONT)] When you move the front speakers and center speaker, be sure to set the parameters of the distance (A) from the listening position to the speakers. You can set the parameters from 1.0 to 7.0 meters1) (3 to 23 ft) for the front speakers, from 0.0 to 7.0 meters2) (0 to 23 ft) for the center speaker. A [L/R] 3.0 m/10 ft3): Set the front speaker distance. [CENTER] 3.0 m/10 ft3)4): Set the center speaker distance (up to 1.6 meters (5 ft) closer to the front speakers). 1)0.9 to 6.9 meters for North American models. 2)0.0 to 6.9 meters for North American models. 3)When you perform the Quick Setup (page 21), the default settings are changed. 4)This item appears when you set [CENTER] to [YES] in the [CONNECTION] setting. x [DISTANCE (SURROUND)] When you move the surround speakers, be sure to set the parameters of the distance (B) from the listening position to the speakers. You can set the parameters from 0.0 to 7.0 meters1) (0 to 23 ft). B 52GB [L/R] 3.0 m/10 ft2)3): Set the surround speaker distance (up to 5.0 meters (16 ft) closer to the front speakers). 1)0.0 to 6.9 meters for North American models. 2)When you perform the Quick Setup (page 21), the default settings are changed. 3)This item appears when you set [SURROUND] to [YES] in the [CONNECTION] setting. Note • If all front and surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker. • Do not place the surround speakers farther away from your listening position than the front speakers. • Depending on the input stream, the [DISTANCE] setting may not be effective. x [LEVEL (FRONT)] You can adjust the sound level of the front speakers, center speaker, and subwoofer. You can set the parameters from –6.0 dB to 0 dB for [L/R], and from –6.0 dB to +6.0 dB for [CENTER] and [SUBWOOFER]. Be sure to set [TEST TONE] to [ON] for easy adjustment. [L/R] 0.0 dB: Set the front speaker level. [CENTER] 0.0 dB*: Set the center speaker level. [SUBWOOFER] +2.0 dB: Set the subwoofer level. * This item appears when you set [CENTER] to [YES] in the [CONNECTION] setting. x [LEVEL (SURROUND)] You can adjust the sound level of the surround speakers. You can set the parameter from –6.0 dB to +6.0 dB. Be sure to set [TEST TONE] to [ON] for easy adjustment. [L/R] 0.0 dB*: Set the surround speaker level. * This item appears when you set [SURROUND] to [YES] in the [CONNECTION] setting. x [TEST TONE] The speakers will emit a test tone to adjust [LEVEL (FRONT)] and [LEVEL (SURROUND)]. [OFF]: The test tone is not emitted from the speakers. [ON]: The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [SPEAKER SETUP] items, the test tone is emitted from each speaker in sequence. Adjust the sound level as follows. 1 Set the [TEST TONE] to [ON]. 2 Press C/X/x/c repeatedly to select the desired speaker and the level. 3 Press . 4 Repeat Steps 1 to 3. 5 Press C/X/x/c repeatedly to set [TEST TONE] to [OFF] after adjusting the speaker level. Note • The test tone signals are not output from the HDMI OUT jack. Tip • To adjust the volume of all the speakers at one time, turn the VOLUME control on the unit, or press VOLUME +/– o...