Votes - 4, Average rating: 3.8
(
)
)
|
Other manuals for this model:
Home Theater Systems - HTR-6100 (94.9 kb)
Home Theater Systems - HTR-6100 (2.28 mb)
Home Theater Systems - HTR-6100 (2.3 mb)
manual abstract
Note If you select the VCR or DVD recorder, set the TV’s video input to match the component you selected. 3 Turn MASTER VOLUME on the receiver to adjust the volume. Note To avoid damaging your speakers, make sure that you turn down the volume before you turn off the receiver. To mute the sound Press MUTING. The muting function will be canceled when you do the following. • Press MUTING again. • Turn the power off. • Increase the volume. Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas to the receiver (see page 9). Tip The tuning scale is: FM: 50 kHz AM: 9 kHz Automatic tuning If you do not know the frequency of the station you want, you can let the receiver scan all available stations in your area. 1 Press TUNER repeatedly to select the FM or AM band. The last received station is tuned in. Tip You can also use INPUT SELECTOR on the receiver. 2 Press TUNING + or TUNING –. Press TUNING + to scan from low to high; press TUNING – to scan from high to low. The receiver stops scanning whenever a station is received. Tip If “STEREO” flashes in the display and the FM stereo reception is poor, press FM MODE to change to monaural (MONO). You will not be able to enjoy the stereo effect, but the sound will be less distorted. To return to stereo mode, press FM MODE again. Amplifier Operation Selecting the component Direct tuning You can enter the frequency of the station you want directly. 1 Press TUNER repeatedly to select the FM or AM band. The last received station is tuned in. 2 Press D.TUNING. 3 Press the numeric buttons to enter the frequency. Example 1: FM 102.50 MHz Press 1 b 0 b 2 b 5 b 0 Example 2: AM 1,350 kHz Press 1 b 3 b 5 b 0 If you have tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception. If you cannot tune in a station and the entered numbers flash Make sure you have entered the right frequency. If not, repeat steps 2 and 3. If the entered numbers still flash, the frequency is not used in your area. This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, it only stores the stations with the clearest signals. If you want to store FM or AM stations one by one, see “Presetting radio stations”. Use the buttons on the receiver for the operation. 1 Press ?/1 to turn off the receiver. 2 Hold down INPUT SELECTOR and press ?/1 to turn the receiver back on. “AUTO-BETICAL SELECT” appears in the display and the receiver scans and stores all the FM and FM RDS stations in the broadcast area. For RDS stations, the tuner first checks for stations broadcasting the same program, then stores only the one with the clearest signal. The selected RDS stations are sorted alphabetically by their Program Service name, then assigned a 2-character preset code. For more details on RDS, see page 20. Regular FM stations are assigned 2- character preset codes and stored after the RDS station. When done, “FINISH” appears in the display momentarily and the receiver returns to the normal operation. Notes • Do not press any button on the receiver or supplied remote during autobetical operation, except ?/1. • If you move to another area, repeat this procedure to store stations in your new area. • For details on tuning the stored stations, see “Tuning to preset stations”. • If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again. Storing FM stations automatically — AUTOBETICAL You can preset up to 30 FM or AM stations. Then you can easily tune in the stations you often listen to. Presetting radio stations 1 Press TUNER repeatedly to select the FM or AM band. The last received station is tuned in. 2 Tune in the station that you want to preset using Automatic Tuning (page 17) or Direct Tuning (page 18). 3 Press MEMORY. “MEMORY” appears in the display for a few seconds. Do steps 4 to 5 before the display goes out. 4 Press PRESET/CH/D.SKIP + or PRESET/CH/D.SKIP – repeatedly to select a preset station number. Each time you press the button, you can select the preset station number as follows: If “MEMORY” goes out before you select the preset station number, start again from step 3. Tips • You can also use PRESET TUNING + or PRESET TUNING – on the receiver. • You can also press SHIFT repeatedly to select a memory page (A, B or C) and then press the numeric buttons to select a preset number. 5 Press MEMORY again. The station is stored to the selected preset number. If “MEMORY” goes out before you press MEMORY, start again from step 3. 6 Repeat steps 2 to 5 to preset another station. Tuning to preset stations 1 Press TUNER repeatedly to select the FM or AM band. The last received station is tuned in. 2 Press PRESET/CH/D.SKIP + or PRESET/CH/D.SKIP – repeatedly to select the preset station you want. Each time you press the...
Other models in this manual:Home Theater Systems - HTR-6600 (1.08 mb)