|
Other manuals for this model:
manual abstract
This allows the sound from each speaker to reach the listener at the same time. Note You can not set the distance of subwoofer speaker. Test Press ENTER to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system. Front Left (L) > Center > Front Right (R) > Surround Right (R) > Surround Left (L) > Subwoofer You can stop the test using V/v. Return Press ENTER to return to the previous menu. Disc Subtitle Disc Menu Rating Area Code TV Aspect Menu Language 5.1 Speaker Setup Others Disc Audio S S Front L Volume 0 dB Size Small Distance 0.3 m Test Return Additional Informatio n Sleep Timer Setting You can set the DVD Receiver to turn off automatically at a specified time. 1 11 Press SLEEP to set the desired sleep time. The SLEEP indicator and sleep time appears in the display window. 2 22 Each time you press SLEEP the setting changes in the following order. SLEEP 90 >80 > 70 > 60> 50 > 40 > 30 > 20 >10 > OFF Note • You can check the time remaining before the DVD Receiver turns off. Press SLEEP. The remaining time appears in the Display Window. Viewing the Playing Time and Remaining Time in the Front Panel Display You can check the disc information, such as the remaining time, total number of titles in a DVD, or tracks in a CD, VIDEO CD or MP3, using the front panel display. Press DISPLAY on the remote. Each time you press DISPLAY while playing the disc, the display changes. Notes • Depending on the type of disc being played and the playing mode, the disc information may not be displayed. • This function is available during only playback mode. Tips • When playing VIDEO CDs with PBC functions, only the playing time of the scene is displayed. • The playing time and remaining time of the current chapter, title, track, scene, or disc will also appear on your TV screen. Dimmer This function will change the brightness of the display window on the front panel during in power-on status. Press the DIMMER repeatedly. Muting Press MUTING to mute your unit. You can mute your unit in order, for example, to answer the telephone, “MUTING ON” indicator in the Display Window. To exit mute mode, press MUTING again. Using Headphone Jack Connect a stereo headphone plug ( 3.5mm) into the PHONES connector. The speakers are automatically disconnected when you plug in a headphone (not supplied). Volume Control You can adjust the volume by pressing VOLUME (-/+) repeatedly. Using the Sound Effect This system provides you with sound effect, simply by pressing a button. Choose sound to suit your needs. Press DSGX on the remote. The sound effect is activate. • DSGX With DSGX on, bass frequencies are effectively reinforced. To turn off the sound effect Press DSGX on the remote again. Notes • When you connect headphones to the system, the DSGX function does not work. • This function is available during only playback mode. 30 Radio Operation Presetting the Radio stations You can preset 30 stations for FM and AM (MW). Before tuning, make sure that you have turned down the volume. 1 11 Press TUNER/BAND on the remote control until FM or AM (MW) appears in the display window. 2 22 And then every time you press TUNER/BAND, FM and AM (MW) changes alternately. 3 33 Press and hold TUNING - or + on the remote control for about two seconds until the frequency indication starts to change, then release. Scanning stops when the DVD/CD Receiver tunes in a station. “TUNED” and “ST” (for stereo program) appear in the Display Window. 4 44 Press TUNER MENU on the remote control. A preset number will flash in the Display Window. 5 55 Press TUNING - or + on the remote control to select the preset number you want. 6 66 Press TUNER MENU on the remote control again. The station is stored. 7 77 Repeat steps 3 to 6 to store other stations. To tune in a station with a weak signal Press TUNING - or + repeatedly in step 3 to tune in the station manually. To clear all the stored stations Press and hold TUNER MENU for about two seconds and “CLEAR ALL” is appeared in the display window and then press TUNER MENU again, the stations are cleared. • If you have accidentally entered into the "CLEAR ALL" mode and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" display will go off by itself and change to normal mode. Note If all stations have already been entered, the FULL message will appear in the display window for a moment and then a preset number will flash. To change the preset number, follow the steps 5-6 as above. Listening to the Radio Preset radio stations in the DVD Receiver’s memory first (see “Presetting radio stations” on the left). 1 11 Press TUNER/BAND until AM (MW) or FM appears in the Display Window. The last received station is tuned in. 2 22 Press PRESET -/+ repeatedly to select the preset station you want. Each time you press the button, the DVD receiver tunes in one preset station at a time. 3 33 Adjust the volume by pressing VOLUME + or repeatedly. To turn ...