Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
Other audio connection TV or external equipment terminal Cable required (not included) Main unit terminal Features OPTICAL OUT .Do not bend sharply when connecting. Optical digital audio cable [\\\\\\OPTICAL\IN\\\\\\] OPTICAL IN This is the preferred connection for best sound and true surround sound. This unit can decode the surround signals received from your TV, cable or satellite STB. Refer to the operating instructions for the TV, cable or satellite STB for the settings necessary to output its audio from the digital audio output to your home theater system. Only Dolby Digital and PCM can be played with this connection. .After making this connection, make settings to suit the type of audio from your digital equipment (• 12). [Note] .Do not make the video connections through the VCR. Due to copy guard protection, the picture may not be displayed properly. .Only one video connection is required. Choose one of the video connections above depending on your TV. .If you have various sound sources (such as Blu-ray player, DVD recorder, VCR, etc.), connect them to the available inputs on the TV and the TV output should then be connected to the AUX or OPTICAL IN terminal of the main unit. 7RQTX0217 Getting StartedQuick Start Guide step 3 AC power supply cord connection 8RQTX0217 Quick Start Guide Getting Started AC IN Main unit AC power supply cord (included) To household AC outlet (AC 120 V, 60 Hz) Conserving power The main unit consumes a small amount of power, even when it is in standby mode (approx. 0.1 W). To save power when the unit is not to be used for a long time, unplug it from the household AC outlet. You will need to reset some memory items after plugging in the main unit. [Note] The included AC power supply cord is for use with the main unit only. Do not use it with other equipment. Also, do not use cords for other equipment with the main unit. step 4 Preparing the remote control Do not: Batteries .mix old and new batteries. .use different types of batteries at the same time. .take apart or short circuit. .attempt to recharge alkaline or manganese batteries. .use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control. Remove the batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place. Use Aim at the remote control signal sensor (• 35), avoiding obstacles, at a maximum range of 7 m (23 ft) directly in front of the unit. R6/LR6, AA Insert so the poles (. and .) match those in the remote control. Press in and lift up. Replace the cover. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. .Use alkaline or manganese batteries. .Do not heat or expose to flame. .Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. step 5 EASY SETUP The Easy setup screen assists you in making necessary Easy setup settings settings. Preparation Turn on your TV and select the appropriate video input mode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit. .To change your TV’s video input mode, refer to its operating instructions. .This remote control can perform some basic TV operations (• 34). DVD DVD OK OK EASY SETUP .Language Select the language used on menu screen. .TV aspect Select the aspect to suit your TV. .Speaker check Listen to speaker output to confirm speaker connections. .Speaker output Make surround sound setting for speaker output. .TV audio Select the audio input connection from your TV. For AUX connection (• 7): Select “AUX”. For OPTICAL IN connection (• 7): Select “DIGITAL IN”. This will be the TV audio setting for VIERA Link “HDAVI Control”. (• 20) [Note] .If this unit is connected to a “HDAVI Control 3 or later” compatible TV via HDMI cable, the menu language and TV aspect information will be retrieved via VIERA Link. .If this unit is connected to a “HDAVI Control 2” compatible TV via HDMI cable, the menu language information will be retrieved via VIERA Link. .Settings in the Easy setup can also be changed in the player settings [e.g. language, TV aspect, speaker level and TV audio (• 24)]. 9RQTX0217 Getting StartedQuick Start Guide 1 Turn on the unit. .When the Easy setup screen appears automatically, skip step 2 and 3. 2 Select “DVD/CD”. 3 Show the Easy setup. 4 Select “Yes”. 5 Follow the messages and make the settings. (..right, Easy setup settings) 6 Finish Easy setup. DVD EASY SETUP (Main unit only) SET RETURN Easy setup Would you like to start easy setup? Yes No OK OK OK Setting up the radio Getting Started 1 2 3 4 5 6 7 8 0 9 SEARCH SKIP SKIP SEARCH OK EXT-IN RADIO FUNCTIONS 10MENU PLAY MODE PLAY MODE Numbered buttons RADIO , SEARCH , FUNCTIONS OK MENU -TUNE MODE/—FM MODE MEMORY TUNE SELECTOR Confirm...