|
manual abstract
This step identifies pre-wire location, expediting sound system installation. Trim ring measures 255.8"L and will accommodate 3.8" to 11.4" drywall. Mounting holes are provided to match both 16" and 24" center studs. FA-TR4 is finished in black epoxy. MODEL A B C NET WEIGHT LBS / KGS FA-TR4 255.8” (651mm) 65.8” (166mm) 111.4” (285mm) 1.5 lbs (.7 kgs) Specifications subject to change without notice 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 © 2001 Atlas Sound LP Printed in U.S.A. 000501 SL1-1512 FA51-4 FA170-4 ATTRACTIVE, EASY-FIT GRILLES FA51-4, FA170-4, FA720-4 & FA730-4 Strategy Series grilles push mount for fast and easy installation without tools. They are also aesthetically pleasing both in size and overall appearance. This unique grille design utilizes three specially configured, serrated, welded studs for secure, push-on installation, achieving a clean, hardware-free appearance. The grilles are available in a choice of three round styles and one square version to meet all types of interior decor and budget considerations. All models are constructed of CRS and finished in textured white epoxy or a combination of textured white and black enamel. Each of these grills were designed to be use with the FA97-4, FA95-4 enclosures and the FAPR-4 Plaster Ring only. The functional and economic FA51-4 round grille features a one-piece, stamped, perforated opening which is compatible with most ceiling styles. The grille's 1.8" diameter holes are equally spaced, forming a perforation pattern which allows for high-quality sound transmission. Net weight: .5 lbs (227g) Square Model FA170-4 features an integrally designed subplate with slotted cutouts enabling the grille to be positioned for directional ceiling requirements.This exclusive feature allows for independent grille rotation regardless of mounted back box position. The three push-mount grille studs are sandwiched in between the grille and subplate, allowing the studs to rotate within the slotted cutouts as the grille is turned. Net weight:1.5 lbs (.7kgs) Aesthetic value highlights the round Strategy FA720-4 grille. The unit's sturdy, two piece construction features a perforated, mesh grille, welded to a formed outer ring. The grille's perforated design and narrow ring width enable it to embrace selective applications, while providing optimum speaker performance. Net weight: .5 lbs (227g) The unique and contemporary design of the FA730-4 grille compliments any surrounding decor and offers excellent voice/music transmission through standard perforation design. The grille features a textured white trim ring, accented by black regressed step-rings and black finished perforation. When installed, the grille gives the appearance of a recessed spot or down light. Net weight: .63 lbs (286g) ONE FA720-4 MOUNTS MODEL GRILLE DIMENSIONS SPEAKER ENCLOSURE MTG.RING FA51-4 77.8" Dia. x 5.16" Proj. (216 x 8mm) FA114 FA97-4 FA170-4 93.4" Sq. x 5.16" Proj. (248 x 8mm) & & FAPR-4 FA720-4 77.8" Dia. x 5.16" Proj. (216 x 8mm) FA134 FA95-4 FA730-4 77.8" Dia. x 1.2" Proj. (216 x 13mm) FA730-4 R General signaling (1480 non-fire) includes all speaker/transformer combinations (except models with HT-82) when used with a UL listed enclosure and baffle. Specifications subject to change without notice 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 © 2001 Atlas Sound LP Printed in U.S.A. 000501 SL1-1512 9 Ceiling Welded Stud for Pre-Mount Installation Rotating Clamp Ceiling Welded Stud for Pre-Mount Installation Rotating Clamp FIG. 1 Area of detail for Figures 2, 3 & 4 FIG. 2 Tile Bridge Max. thickness of 11.4" STRATEGY SERIES™ 4" SYSTEM INSTALLATION Figure 1: Enclosures mount quickly using rotating clamps. Grille push-mounts with “easy-fit” welded studs. Figure 2: Enclosure installation from below ceiling using tile bridge above. This room-side installation into suspended tile utilizes rotating clamps to sandwich tile between bridge and enclosure. Max. ceiling thickness is 11.4". Figure 3: Enclosure installation from above ceiling using tile bridge (new construction). Rotating clamps are used to pre-mount tile bridge to enclosure, allowing system to be positioned in ceiling before tiles are set. Please note maximum ceiling thickness in this application is 5.8" to allow grille studs to mount into enclosure. Figure 4: Enclosure installation from below ceiling without tile bridge. This blind-mount installation method, which is most common in plaster, drywall and retrofit applications, is accomplished by cutting an opening to size, inserting the enclosure and rotating the clamps. Max. ceiling thickness is 11.4". Figure 5: Illustrates wall-mount installation using plaster ring Model FAPR-4. A minimum wall depth of 27.16" (from rim of the plaster ring to the back of the speaker) is required for mounting. ARCHITECT AND ENGINEER SPECIFICATIONS Please refer to SL1-1533 (FA134) or SL1-152...
Other models in this manual:Home Theater Systems - STRATEGY SERIES FA97-4 (93.78 kb)